MAXHUB UC M40 User manual

360° panoramic conference camera
User Manual
All pictures in this manual are for reference only,
please refer to the actual product
◆ Safety Warnings
Before using and operating this equipment, please read and observe the
following precautions carefully to avoid dangerous or illegal operations.
☆ Placement
1) DO NOT expose the camera to any heat source (such as electrical heater).
2) Normal operating temperature is 0-40℃, normal operating humidity is
10%-90%RH.
3) DO NOT place the product in dusty and humid environments in case of
internal circuit fault.
4) DO NOT expose the equipment directly to the sun, lest the equipment
temperature is too high to affect the normal use of the equipment.
☆ Children Safety
1) The product and accessories may contain some small-part. Please place
them beyond the reach of children in avoidance of swallowing danger.
2) The lens of this equipment is made of glass. If the lens is damaged, please
be careful to handle it to avoid being scratched by broken glass and keep
away from children.
☆ Power Supply
1) When using an external power supply, follow all safety guidelines for
third-party power supply devices.
◆ Statement
1) Intellectual property right statement: The hardware design and software of
this product are covered by the patents.Anyone who reproduces this
product or the content of the instruction without the authorization of the
Company shall assume legal liabilities.
2) This manual is for reference only, and the actual function of the final
product is subject to the actual function of the product received by the
customer.
3) The picture is for reference only, please refer to the actual product. The
company reserves the right to improve and change the appearance and
☆ Water Precaution
1) The product is not waterproof,Please keep it dry.
☆ Maintenance
1) Please contact professional service personnel for maintenance services.
2) When the equipment is damaged, please do not disassemble it for repair
without permission, please call customer service to report for repair.
3) DO NOT insert any sharp or pointed object into the device.
4) DO NOT drop or hit the device to avoid damage to the device.
5) The temperature of the equipment may rise during operation, which is a
normal phenomenon during operation. In this case, turn off the device and let
it cool before trying to use it. 360° panoramic conference
UC M40

1.Appearance 2.Connection
Adapter
Please connect the device according to the following figure before use.
USB
☆ Hardware Mode：
① The video conference equipment is connected to the 12V/1A adapter
and automatically starts up.
② Connect the USB cable to the computer, press the mode switch button,
select the display layout to be output (panorama/two-screen/quater-screen
/Discussion/speaker/presentation/presenter/Custom mode).
( Touch to mute/unmute microphone, status light lit up in White when
microphone is ON and Red light indicates it is OFF. The blue LED "circle"
indicate the direction of the sound source.)
③ Open Video Platforms such as Tencent Meeting, Zoom and Microsoft
Teams, and select MAXHUB UC M40 as the main camera source.
④ Select UC M40 as the main Speaker and Microphone source from your
Video Platform and start your Video Meeting. Volume can be adjusted from
your computer directly.
⑤ Equipment power off.
Note: Some video conferencing platforms require you to select the MAXHUB
UC M40 camera and microphone.
☆ Pro mode：
① The video conference equipment is connected to the 12V/1A adapter
and automatically starts up.
② Connect the USB cable to your computer, go to your computer disk, open
the PanoCAM Studio folder, and click Install Package to install . Open the
Studio software configure the required parameters and select the display
layout for the output ( Touch to mute/unmute microphone, status light lit up
in White when microphone is ON and Red light indicates it is OFF. The blue LED
"circle" indicate the direction of the sound source).
③ Open Video Platforms such as Tencent Meeting, Zoom and Microsoft
Teams, and select Studio Camera as the main camera source.
④ Select UC M40 as the main Speaker and Microphone source from your
Video Platform and start your Video Meeting. Volume can be adjusted from
your computer directly.
⑤ Equipment power off.
Note: Some video conferencing platforms require you to select a Studio
camera and microphone.
Camera
Mode Switch
Indicator Light
Touch Button
Microphone
USB Type-C
Loudspeaker
DC Port
type-c
DC