MAXHUB ND55CMA-T User manual

Commercial Display
Quick Start Guide
All the pictures in this manual are for reference only, subject to our available products.

Thank you for choosing MAXHUB product.
To ensure that you are able to fully utilize the capabilities of the product, we ask that you
please read this user manual carefully and thoroughly before using the device. Should you
have any questions or require assistance, please do not hesitate to contact our technical
support team for guidance.
Safety Warnings
Placement
(1) Please do NOT place the product on a slope, mount on an unstable stand or an insuiciently
robust wall, a table nor a shelf.
(2) Please do NOT expose the product to direct sunlight or any other heat source.
(3) Please do NOT put the product near devices that generate strong magnetic fields.
(4) Remove water splashes immediately with a clean dry cloth.
(5) Please do NOT place any other heavy objects on the product.
Power Supply
(1) Please check the product’s operating voltage and frequency matches the local power
configuration.
(2) Please unplug the device during storming or thundering weather.
(3) Please unplug the power should the product is left unused for long time.
(4) Please keep the power cable from physical or mechanical damage.
(5) Please use the original power cable from the accessory bag, don't modify or lengthen it.
(6) Please make sure the AC is grounded.
(7) This power cable comes with the device exclusively for this device only.
LCD Screen
(1) Do NOT use hard nor sharp objects on the screen other than MAXHUB stylus.
(2) Please unplug the power before cleaning the product.
Please clean the screen with a soft, dustless and dry cloth.
(3) Please do NOT use water or liquid detergent to clean the product.
(4) Please contact the authorised reseller for thorough cleaning.
(5) Please do NOT display a high-brightness image on the screen for too long time.
Viewing Distance
For optimal viewing experience, it is recommended to position the commercial display at a
distance that is 3-4 times the diagonal length of the screen.
Temperature & Humidity
(1) Please do NOT put the product near a heater nor a radioactive source.
(2) If the product is moved from a cold place to a warm one, please unplug the power cable
and allow the product to gradually warm up for at least two hours to reduce the moisture.
(3) Operating temperature of the product is 0°C-40°C, operating humidity is between
0%-90%RH.
(4) avoid exposing the unit to rain or placing it in high humidity areas. Additionally, it is
crucial to keep the unit in a dry and cool indoor environment.
01

Ventilation
Please ensure that the commercial display is placed in an area with adequate ventilation
to allow for proper heat dissipation. It is recommended to leave a minimum of 10cm of space
on the left, right, and back of the device, and 20cm of space above it to ensure proper airflow
and optimal performance.
Earphone
When using the earphones, it is important to be aware that prolonged listening at high
volumes may cause temporary or permanent hearing loss. To prevent this, we strongly
recommend turning down the volume before inserting the earphones into your ears.
Energy Saving
Please note that pressing the power button briefly will not fully shut down the commercial
display. Instead, it will enter standby mode, with only the screen turning o. To properly shut
down the device, press and hold the power button for approximately 3 seconds and confirm
the shut down command that appears on the center of the screen.
Notes for Cleaning
Please do not block or cover the heat vents on the back panel and do not spray liquids on the
device.
Power Switch Status Signs
“I” means power on, “O” means power o.
Maintenance
Please contact authorised reseller for maintenance or repairing.
Warranty Exclusions
MAXHUB does not warranty Products that match any one or few of the following descriptions:
(1) Product damage caused by violating the user manual.
(2) Hardware damage caused by improper setup.
(3) Product damage caused by unauthorised modification or maintenance.
(4) Product damage caused by using in an unsuitable environment.
(5) Product damage caused by abnormal external force.
(6) Product damage caused by natural disasters or other force majeure.
(7) Damaged Warranty Sticker.
(8) Unable to provide eective purchase certificate.
I. Unboxing Checklist
Wall Mounting ×1 Quick Start Guide×1 Commercial Display ×1
Commercial Display
Quick Start Guide
Model: ND43CMA / ND55CMA / ND65CMA
ND75CMA / ND86CMA / ND98CMA
All the pictures in this manual are for reference only, subject to our available products.
02

II. Installation Guide
1.Confirm the panel installation position.
Align the wall-mounted screw holes with the studs on the back panel and fasten with 2
wall-mounted strips.
First, fasten the screws on the top side, then fasten the screws on the bottom side. A total
of four screws are required.
Refer to the table below for the position of the lock hole.
Note:【*】Power cord could be dierent for dierent regions , pls refer to the actual product.
Power Cord*×1
WiFi Module (SI07B) ×1 HDMI Cable ×1
Remote Control×1
Size
55"
65", 75"
BracketSeries
WIB4722A
ND** CMA-T WIB9080A
Step 1:fasten the screws
on the top
Step 2:fasten the screws
on the bottom
03

Take 8 pcs of expansion rubber plug b
and screw it into the wall. It is recommended
to use 10 mm impact drill bit.
 Fix the wall bracket on 8 pcs expansion
plug b with a combination of 8 pcs screw C
and gasket d.
Note: At this moment please install the WiFi
module if WiFi is required for this installation.
(See III Installing the WiFi Module)
Ø 10
b×8
c×8 d×8
Take the panel out of the box and place it on a soft surface, such as a mat, to protect it
during installation.
2
wall wall
2.Steps to install the wall mount
Take out the wall mount plate accessory package from the accessory box.
b-8pcs c-8pcs d-8pcs
a-1pcs
1
04

3.Reference On Wall Mount
When planning for wall mounting, it is important to take into consideration the physical
dimensions of the panel. To ensure ease of use, it is recommended to maintain a proper
distance between the wall and the back of the panel.
NOTE: The table and diagram are only for reference.
Series
L
H
W
Dimension
Commercial Display
1463.3 mm
838.3 mm
81.6 mm
65"
1685.6 mm
963.7 mm
81.6 mm
75"
1233 mm
703.5 mm
71.4 mm
55"
5 Tighten the safety screw counter-clockwise
to make the top of screw reach the second
screw hole.
6 Hang the panel vertically on the bracket
and then finish installation.
Tilt the Device Mounting arms
& Screen
Wall Plate
Note: This step is especially important for
installation on the mobile stand. Tightening
the safety screws will make device more stable.
Note: Please keep the panel in the center of
the bracket.
L
H
W
05

III. Installing the WiFi Module
Please make sure that the following items are ready before setting up the wireless module.
1×Commercial Display
1×WiFi Module
Please make sure the power cord of the Commercial Display is disconnected before
installation.
Step1: Use a Phillips screwdriver toloosen two screws and remove the cover.
Step2: Insert the WiFi module into the wireless module slot.
Note: This WiFi Module only works for the Commercial Display by plugging it into
the above slot.
WiFi Module
WiFi Module
06

IV. Installing the OPS module
Please make sure the power cord of the Commercial Display is disconnected before
installation.
Step1: Unscrew and remove the cover. Step 2: Prepare the OPS module.
OPS module
Step4: Installation of OPS module.
Rail up
Insert the module
Step3: Unscrew and remove the cover.
Slot
Up
07

Plug the power cable into the power socket of the product.
Plug the power cable into the power supply.
Flip the rocker switch and press the power button. The indicator light will turn white when the product
is powered on.
V. Removing the OPS module
Please make sure the power is o before proceeding with the removal.
VI.Power On/0
To remove the module, loosen the screws and
release the lock.
08

VII. Control Panel
(1) Please check connections are correct before starting.
2
1
3
4
5
6
7
8
9
Number
Power indicator light
Items
: Tap to enter energy-saving, press at least 2 seconds to enter standby mode
MENU: Pop up Settings menu
: Press to scroll left
: Press to scroll right
INPUT: Pop up channel Setting
: Press to scroll up / Volume up
Loudspeaker
1
2
3
5
6
4
8
: Press to scroll down / Volume down7
9
Note: Dierent sizes of product horn position is not the same,subject to our available products
09

(2) Terminal Interface
Type 1:
Type 2:
4 5 5 6 2 3 1 9 7 8 10 11
1 2 3 4 5 5 6 5 7
8 9 10 11
Number
Connect USB devices such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc.
Serial interface, used for mutual transfer of data between devices.
Function description
Connect USB devices such as mobile hard disk, U disk, USB keyboard and mouse, USB drives, etc.
Support charging, data transmission, extension for audio and video output interface, etc.
Note：The maximum rated power of the USB Type-C port of this product is 65W. When using this
port to charge electronic devices, the charging power of the electronic device cannot exceed the
rated power of this port. If the charging power of the electronic device exceeds the rated charging
power of this port, please Do not directly use this port for charging.
Audio output to the external speaker.
Connect to the devices with HDMI input function.
1
2
3
5
4
6
7
Items
2.0
RS232
3.0
HDMI
High-definition multimedia interface signal input, connect to devices with HDMI output interface
(personal computer with HDMI output, set-top box, or another video device).
USB
Type-C
HDMI OUT
AUDIO OUT
Carry multichannel sound via optical signals.8 SPDIF
Connect RJ45 terminals.9 LAN
To open or shut down AC power supply. “I”means power on,“O” means power o.10 AU SWITCH
AC power input, connect AC power supply.11 AC IN
Note: Dierences in the number and location of terminals of dierent sizes,subject to our available products.
10

(3) Remote Control
Note:
(1) 43~55 inch: USB Type-C、HDMI 1、HDMI 2 support HDMI OUT; Android channel: not support HDMI OUT.
(2) 65~98 inch: PC channel、 USB Type-C、HDMI 1、HDMI 2 Support HDMI OUT；Android channel、
HDMI 3 not support HDMI OUT.
1
4
7
8
11
2
3
6
5
10
9
13
12
Number Function description
1
2
3
4
5
6
7
8
9
10
11
12
13
Power on / o
Mute on / o
Up
Left
Down
Right
OK
Settings
Source menu
Back
Increase volime
Homepage
Decrease volume
• Remote Control Button Instruction • Detailed Function Description
11

• Remote Control Instruction
Install Batteries
샼Open back cover of battery component on the back of remote control.
샽 Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole
are correct ("+"to"+", "-" to "-"), please do not mix using old and new batteries.
샾 After battery is installed, close the back cover of battery components, and make the following clip buckled to the
bottom.
• Range of remote control
Remote control can work normally within the range of 8 meters distance, 30 degrees left and right from the
remote-control receiver; in order to protect environment, please dispose waste battery into recycling box.
Note: The remote receiver is located at the behind of the panel.
If the battery is replaced by an incorrect type, it may lead to explosion.
12

IX.Wired Screen Share from your laptop to the display
Type-C
Through USB Type-C
13

Computer
Type-C
USB USB
USB Type-C Cable
USB cable
USB device
X.Frequently Connected Ports
14

XI. First Start of MAXHUB Commercial Display
To start the MAXHUB ND**CMA-T, press the power key. Once the device is on, it is ready for use with
all of its features.
ND**CMA-T Series
USB cable
USB device
Computer
HDMI IN
HDMI Cable
RS232
AUDIO OUT
Serial Port Cable
Audio cable
AUDIO IN
Amplifier/Acoustics/Earpone
USB USB USB
15

XII. Maintenance
To ensure the proper functioning of the product, it is important to keep it free of dust and
moisture.
Regular cleaning with a soft, dust-free, and dry cloth is recommended. Remember to
unplug the product before cleaning.
Cleaning the Screen
1. Please dissolve the fabric softener or detergent in 75% alcohol.
2. Please use a piece of soft cloth and soak it with the solution.
3. Take out the cloth and squeeze it dry before wiping on the screen.
Cleaning the Touch Frame
Please choose dry, soft and dust-free wipes to clean the touch frame.
Unplug Power
To protect the device during stormy weather or when it will not be in use for an extended
period of time, it is recommended to unplug the power.
i. Energy Star Statement
ENERGY STAR is a U.S. Environmental Protection Agency voluntary program that helps
businesses and individuals save money and protect our climate through superior energy
eiciency. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting
strict energy eiciency criteria or requirements set by the U.S. Environmental Protection Agency.
The following logo appears on all ENERGY STAR-certified models:
This product qualifies for ENERGY STAR in the “Standard mode” setting and this is the setting
in which power savings will be achieved. Changing the Standard mode picture settings or
enabling other features will increase power consumption that could exceed the limits necessary
to qualify for ENERGY STAR rating. Refer to EnergyStar.gov for more information on Energy
Star program.
16

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates,uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
17

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
18