Maxwell Thomas MORNINGSIDE OVERBED TABLE User manual

• Important Warnings
To avoid serious injury and/or death to a patient or resident, follow ALL
instructions and these guidelines:
• This product is designed ONLY as patient/resident convenience as a
surface for reading, eating or keeping small personal items, such as
glasses, within reach.
• The weight limit for this product is 50 lbs. (22 kg); the weight should be
evenly distributed over the top of the product’s table.
NOTE: The hinged tabletop extension has a weight capacity of 10 lbs.
• Overloading this product could result in the product breaking as well as
damage to property and/or serious injury.
• This product should NOT be used as a walker, to assist a person in sitting
down or standing up, to prevent or brace a person’s fall, or to transport
persons. Use ONLY as directed.
• This product is designed for indoor use ONLY within close proximity of skilled
caregivers. It is not designed to hold electrical items, such as televisions, and
should be kept away from open flames and excessive heat.
• Inspect the product for damage before each use. DO NOT use the
product if it appears to be damaged or unstable, and DO NOT alter the
product in any way.
• DO NOT overtighten the screws or use power tools when assembling
this product.
• The weight limit on the flip-up surface is 10 lbs.
1-800-634-7328 DirectSupply.com
Maxwell Thomas®
MORNINGSIDE OVERBED TABLE
Assembly and Operating Instructions
Ensamblado de Mesa de Cama e Intrucciones de Uso
Caster Base
Assembly (1)
Column Assembly (1)
Tabletop Assembly (1)
Column/Caster Base Bolts (2)
3⁄8" - 16 x 1"
Height-Adjustment Paddle (1)
Column/Tabletop Nuts (2)
Column/Tabletop Bolts (2)
1⁄4" - 20 x 2"
Column/Caster Base Washer
Tools Needed
Herramientas Necesarias
Components and Parts
Componentes y Piezas
9⁄16"
Column Screw (1)
Pan Head 1⁄4" - 20 x 3⁄8"

Position the
overbed
table column
assembly
so the ‘T’
is facing
upward.
Once the overbed table is fully assembled, carefully place
the overbed table on its casters. Remove the top screw
from the column and discard it. Install the column machine
screw into the upper hole of the outer column and tighten.
NOTE: The bottom screw MUST be left in place or it will
need to be repaired by the manufacturer.
2
Position the overbed table column so the ‘T’ is facing downward, and make
sure the height-adjustment paddle is in place. Insert the square tube of the
column into the tabletop bracket of the tabletop assembly.
NOTE: The bolt holding the height-adjustment paddle in place will need to be
removed when inserting the column bracket into the tabletop bracket – make
sure the paddle stays in the same place when removing this bolt to prevent
the spring mechanism pin from falling out.
Insert the two tabletop bolts and tabletop nuts to secure
the column and tabletop assemblies.
Connect the caster base
assembly to the column
assembly. Place the caster
base washer in the caster
base and insert the caster
base bolts. Tighten using a
9⁄16" socket. Make sure the
concave side of the tabletop
is facing the open side of the
caster base.
1
23
4
Place the height-adjustment paddle into the
square tube, and insert one of the column/
tabletop bolts through the tube and handle to
temporarily hold it in place.
NOTE: The curved portion of the paddle must
be facing upward.
5
6
7
Place the overbed tabletop assembly so
the hinge mechanism is facing upward.
Be sure the top is protected to prevent
scratches during assembly.

3
1-800-634-7328 DirectSupply.com
Optional urinal and
storage basket
installation: the
handle of the urinal
goes into the loop on
the column, and the
upper frame of the
basket clips into the
opposite side of the
column.
NOTE: It is recommended to mount the basket by inserting the
short side of the basket into the basket clips on the column. This
will reduce the basket interference when used with a bed and allow
the tabletop to go fully over a bed for the most usable surface for
the resident. The basket can be mounted using the long side of the
basket if it is more appropriate for your space needs.
Use the cutout in the tabletop
extension to access the height-
adjustment paddle while the
tabletop extension is up.
Gently lift the height-
adjustment paddle upwards
to adjust the height of the
overbed table.
To lower the hinged tabletop extension, lift the hinged tabletop up
slightly and pull upwards on the lever below the tabletop. Make
sure you assist the hinged tabletop extension on its way down to
prevent injury.
To raise the hinged tabletop extension pull upwards on
the tabletop extension until the lock locking mechanism
clicks in place.
Cleaning instructions:
MaxwellThomas thermolaminate overbed tabletops can be safely cleaned and disinfected with the following cleaners and disinfectants. In laboratory
testing using both the NEMA LD 3.4 and ASTM D3450 test methods, these materials were shown to have no discoloration or damage to the finish when
cleaned and disinfected with the products listed below and instructions provided on the cleaners and disinfectants are followed.
NOTE: It is important to remove excess moisture as soon as the product is cleaned and dwell time for disinfectant is complete.
• Asepticare TB-II
• Bleach 5:1
• Bleach-Rite®disinfecting spray
• Cavicide®surface disinfectant
• Citrace®germicide
• Clorox®germicidal wipes
• Dispatch®spray hospital cleaner disinfectant with bleach
• Fade-A-Dyne®stain remover
• Lysol®spray disinfectant
• Precise™ hospital cleaner
• PDI®Super Sani-Cloth®germicidal wipes
• PDI Sani-Cloth HB germicidal wipes
• PDI Sani-Cloth Plus germicidal wipes
• SaniZide Plus®germicidal solution
• Virex®II 256 cleaner
• Virox®AHP 5 disinfectant cleaner surface wipes
Other cleaning solutions, such as mild detergent and water, may be appropriate if they do not have higher concentrations of active ingredients.
•CAUTION: Abrasive cleaners should never be used, as they may damage the surface.

Customer Service
Our promise to you is that you will have a convenient and easy ordering experience, receive a quality overbed table and enjoy
outrageous customer service. If you have any questions about the overbed table you have purchased or would like to request
warranty service, please contact: Direct Supply Equipment & Furnishings at 1-800-634-7328, 6767
N. Industrial Road, Milwaukee, WI 53223, SalesSupport@DirectSupply.com.
Limited 1-Year Warranty
Direct Supply Manufacturing, Inc. warrants to you, as the original purchaser, for the limited warranty period stated above from the
date we ship the product to you that we will repair or replace any product which is defective in material or workmanship. Please note
that the decision to repair or replace a product will be at our discretion.
Our warranty applies only if the product is properly maintained by the original purchaser for normal, indoor use and does not cover
normal wear and tear, modification of the product, or damage caused by abuse, improper use, failure to maintain, use which exceeds
the published product limitations, or the combination of any product with another product. In addition, our warranty does not cover
characteristics or natural variations in wood grain, colorfastness, stains, spills or exposure to chemicals, odors, heat or light. In certain
cases, we may provide you repair or adjustment instructions and/or replacement parts, and ask you to perform a repair or adjustment
or replace a defective part.
Our warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. The limited warranty
period and our obligations under the warranty end once you transfer the product to someone else or at the end of the applicable
limited warranty period identified below, whichever is earlier.
DIRECT SUPPLY MANUFACTURING, INC. MAKES NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE; THESE AND ALL OTHER IMPLIED WARRANTIES ARE SPECIFICALLY DISCLAIMED. TO THE FULLEST
EXTENT ALLOWED BY LAW, DIRECT SUPPLY MANUFACTURING, INC. WILL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR PUNITIVE DAMAGES, OR LOST PROFITS THAT MAY RESULT FROM THE DEVICE OR YOUR USE OF OR
INABILITY TO USE THE DEVICE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. OUR TOTAL LIABILITY TO YOU, IF
ANY, IS LIMITED TO THE PRICE OF THE DEVICE OR SERVICE GIVING RISE TO YOUR CLAIM. Some states do not allow an exclusion
or limitation of incidental or consequential damages, or how long an implied warranty lasts, so the above limitations or exclusions may
not apply to you. If implied warranties are not excluded, and to the extent allowed by law, we limit any and all implied warranties to the
applicable warranty period identified above. Except for rights under any applicable state law, the remedies provided under this warranty are
your sole and exclusive remedy for any breach of our warranty and state the entire limit of our responsibilities.
Distributed by Direct Supply®Manufacturing™, Inc., 6699 N Industrial Road, Milwaukee, WI 53223.
©2018 Direct Supply Manufacturing, Inc. All Rights Reserved. Direct Supply®, Maxwell Thomas®, and all associated logos are the
registered trademarks of Direct Supply, Inc., used under license.
10583Date of Printing: July 2018
The Maxwell Thomas Overbed Table
is also available without the hinged
tabletop extension.
Table of contents
Other Maxwell Thomas Indoor Furnishing manuals
Popular Indoor Furnishing manuals by other brands

BLACK RED WHITE
BLACK RED WHITE NFC 110/596 K Assembly manual

Canadel
Canadel 106 Instructions for installation

Emmezeta
Emmezeta HILS925E1 Assembling Instruction

Monarch Specialties
Monarch Specialties I 3620 Assembly instructions

ehleva
ehleva VOGUE Assembly instructions

Howard Miller
Howard Miller HEKMAN 79167P manual