Mazda 3 2019 User manual

Printed in Japan
©2020 Mazda Motor Corporation
Form No. P011/20
Mazda3/Mazda CX-30 Owner’s Manual Leaflet
This leaflet contains revised information concerning i-ACTIVSENSE
specification changes. The revised information is shaded.
Please keep this leaflet with the owner's manual.

1
i-ACTIVSENSE
i-ACTIVSENSE Status Symbol
(Warning/Risk Avoidance
Support System)
i-ACTIVSENSE OFF symbol
(warning/risk avoidance support
system)
System OFF status
If all the systems are canceled using
the personalization features or the
i-ACTIVSENSE switch, the
i-ACTIVSENSE OFF symbol
(warning/risk avoidance support
system) is displayed.
i-ACTIVSENSE Switch
When the i-ACTIVSENSE switch is
pressed, the following systems are
canceled and the i-ACTIVSENSE OFF
symbol (warning/risk avoidance
support system) in the instrument
cluster is displayed.
x  Lane Departure Warning System
(LDWS)
x  Blind Spot Monitoring (BSM)
x  Distance & Speed Alert (DSA)
x  Front Cross Traffic Alert (FCTA)
x  Rear Cross Traffic Alert (RCTA)
x  Lane-keep Assist System (LAS)
i-ACTIVSENSE OFF symbol
(warning/risk avoidance support
system)
If the i-ACTIVSENSE switch is
pressed again, the systems return to
their original operation status and
the i-ACTIVSENSE OFF symbol
(warning/risk avoidance support
system) turns off.
If the ignition is switched OFF while
you have canceled the systems using
the i-ACTIVSENSE switch, the
systems are automatically enabled
the next time the ignition is
switched ON. However, if the
systems are canceled using the
personalization features, the systems
are not automatically enabled.
NOTE
x
 For the systems which can be
canceled using the i-ACTIVSENSE
switch, they cannot be canceled
when the following systems are
operating, even if you press the
i-ACTIVSENSE switch.
x  Mazda Radar Cruise Control
(MRCC)
x  Mazda Radar Cruise Control
with Stop & Go function (MRCC
with Stop & Go function)
x  You can select systems you want
to cancel using the personalization
features.
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.

2
Lane Departure Warning
System (LDWS) *
Canceling theSystem
The LDWS can be set to inoperable.
x
 (If onlytheLDWS is turned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If theLDWS is turned off by
operating thei-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch.
NOTE
If the ignition is switched OFF while
you have canceled the system using
the i-ACTIVSENSE switch, the
system is automatically enabled the
next time the ignition is switched
ON. However, if the system is
canceled using the personalization
features, the system is not
automatically enabled.
NOTE
If the ignition is switched OFF while
you have canceled the system using
the i-ACTIVSENSE switch, the
system is automatically enabled the
next time the ignition is switched
ON. However, if the system is
canceled using the personalization
features, the system is not
automatically enabled.
*Some models.
BlindSpot Monitoring
(BSM) *
Canceling Operationof Blind
SpotMonitoring (BSM)
The BSM system can be set to
inoperable.
x  (If onlytheBSM is turned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If theBSM is turned off by
operating thei-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch.

3
Distance & SpeedAlert
(DSA) *
Distance & Speed Alert (DSA)
The DSA is a system which provides
advice for maintaining the appropriate
distance between vehicles and notifies
the driver of the recommended, safe
distance to maintain with a vehicle
ahead. The system measures the
distance between your vehicle and a
vehicle ahead while the vehicle speed is
about 30 km/h (19 mph) or faster. If
the distance between your vehicle and
the vehicle ahead is continuously close,
the system alerts the driver of a possible
collision using an indication on the
display and suppresses your vehicle
speed*1 to prevent it from approaching
the vehicle ahead too closely.The LDWS
can be set to inoperable.
Operation conditions
The DSA operates when the
following conditions are all met.
NOTE
x
 The objects which activate the
system are four-wheeled vehicles.
x  The DSA may also operate in the
presence of motorcycles and bicycles.
x  The DSA may not operate normally
when the speed of a vehicle ahead
is too slow.
x  The system does not operate with
the following objects.
x  Vehicles approaching in the
opposite direction.
x  Stationary objects (stopped
vehicles, obstructions)
x  The DSA can be set to inoperable.
x  (If only the DSA is turned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If the DSA is turned off by
operating the i-ACTIVSENSE switch)
Refer to i-ACTIVSENSE Switch.
x  If the ignition is switched OFF while
you have canceled the system using
the i-ACTIVSENSE switch, the system
is automatically enabled the next time
the ignition is switched ON. However,
if the system is canceled using the
personalization features, the system is
not automatically enabled.
*1 The function which suppresses
your vehicle speed is not
available in some markets.
WARNING
Do not rely completely on the DSA:
The ability of the system to detect a
vehicle ahead is limited depending on
the type of vehicle ahead, weather
conditions, or traffic conditions. In
addition, the system is not for
maintaining the distance between
your vehicle and a vehicle ahead. If
you neglect to operate the accelerator
and brake pedals correctly, it could
lead to an accident. Always check the
safety of the surrounding area and
depress the brake pedal or accelerator
pedal while keeping a safe distance
from vehicles ahead or on-coming
vehicles.
x  The ignition is switched ON.
x  The DSA is turned on.
x  The shift lever (manual
transmission vehicle) or the
selector lever (automatic
transmission vehicle) is in a
position other than R.
x
 The vehicle speed is about 30
km/h (19 mph) or faster.
x  i-ACTIVSENSE status symbol
(warning/risk avoidance support
system) (green) is displayed.
*Some models.

4
Front Cross Trac
Alert (FCTA) *
Canceling Operation of Front
Cross TrafficAlert (FCTA)
The FCTA can be set to inoperable.
x
 (If only theFCTA isturned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If theFCTA isturned off by
operating thei-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch.
NOTE
If the ignition is switched OFF while
you have canceled the system using
the i-ACTIVSENSE switch, the
system is automatically enabled the
next time the ignition is switched
ON. However, if the system is
canceled using the personalization
features, the system is not
automatically enabled.
NOTE
If the ignition is switched OFF while
you have canceled the system using
the i-ACTIVSENSE switch, the
system is automatically enabled the
next time the ignition is switched
ON. However, if the system is
canceled using the personalization
features, the system is not
automatically enabled.
*Some models.
Rear Cross Trac Alert
(RCTA) *
Canceling Operation of Rear
Cross TrafficAlert (RCTA)
The RCTA can be set to inoperable.
x  (If only theRCTA isturned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If theRCTA isturned off by
operating thei-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch.

5
Lane-keepAssist
System (LAS) *
System Canceling
The LAS can be set to inoperable.
*Some models.
x  (If only the LAS is turned off)
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
x  (If the LAS is turned off by
operating the i-ACTIVSENSE
switch)
Refer to i-ACTIVSENSE Switch.
NOTE
If the ignition is switched OFF while
you havecanceled the system using
the i-ACTIVSENSE switch, the
system is automatically enabled the
nexttime the ignition is switched
ON. However, if the system is
canceled using the personalization
features, the system is not
automatically enabled.
Smart Brake Support
(SBS) *
Stopping the Smart Brake
Support (SBS) System Operation
The SBS can be changed to
inoperable.
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
When the SBS is canceled, the SBS
OFF indicator light turns on.
NOTE
When the ignition is switched OFF
while the SBS is canceled, the SBS is
automatically enabled the nexttime
the ignition is switched ON.

6
Smart Brake Support
[Rear] (SBS-R) *
Stopping theSmart Brake
Support [Rear] (SBS-R) System
Operation
The SBS-R can be changed to
inoperable.
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
When the SBS-R is canceled, the
SBS OFF indicator light turns on.
NOTE
x

When the ignition is switched OFF
while the SBS-RC is canceled, the
SBS-RC is automaticallyenabled
the next time the ignition is
switched ON.
x 
When the SBS-RC is canceled, the
Smart Brake Support [Rear]
(SBS-R) is also canceled.
NOTE
x  When the ignition is switched OFF
while the SBS-R is canceled, the
SBS-R is automatically enabled the
next time the ignition is switched
ON.
x  When the SBS-R is canceled, the
Smart Brake Support [Rear
Crossing] (SBS-RC) is also
canceled.
*Some models.
Smart Brake Support
[Rear Crossing]
(SBS-RC) *
Stopping theSmart Brake
Support [Rear Crossing](SBS-RC)
System Operation
The SBS-RC can be changed to
inoperable.
For details, refer to the Settings
section in the Mazda Connect
Owner’s Manual.
When the SBS-RC is canceled, the
SBS OFF indicator light turns on.

7
Instrument Cluster
Indication/Indicator Lights
Signal Indicator
i-ACTIVSENSE OFF Symbol (Warning/Risk Avoidance Support
System)