MB QUART ONYX OKC116 User manual

OKC116 / OKC168 / OKC169
OSC213 / OSC216
ONYX
Thank you for choosing MB Quart ONYX speakers for your car audio
sound system. With proper installation, you are on the path to
experiencing your music in a way you only imagined possible. Here at
MB Quart, we call this “Sound In Every Detail.”
The ONYX series speakers have been designed for the enthusiast
looking for great sound and excellent performance. The ONYX series
speakers feature the following:
- Spade Style Speaker Terminals
- Silk Dome Tweeter
- Crossover w/Variable Tweeter Attenuation
- Low Resonant ABS Composite Basket
- Composite Grill
- High Energy Magnet
- Polypropylene Cone
- Butyl Rubber Surround

As with all high quality car audio products, we recommend professional
installation by an authorized MB Quart dealer. Your dealers knowledge
and experience can ensure a problem free and cosmetically integrated
installation.
If you choose to install the speakers yourself, please read the entire
manual very carefully.
SPEAKER LOCATION AND MOUNTING TIPS
THE FIRST STEP IS THOROUGH PLANNING BEFORE THE
INSTALLATION BEGINS. THE SPEAKER SCREW HOLE
CONFIGURATION WILL WORK WITH MOST DOMESTIC AND
FOREIGN VEHICLES. FOLLOW THESE INSTRUCTIONS
CAREFULLY TO ENSURE PROPER IMAGING AND MAXXIMUM
PERFORMANCE.
Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the
windows and other moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure to
route wires through the factory door grommet as shown in the speaker
mounting diagram.
3. After securing the speaker and checking clearances, connect the
red/black speaker audio wires to the correct speaker + and - spade
terminals.
Custom Speaker Location and Installation
1. Follow steps 1-3 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane.
This means that each speaker should be the same height from the
floor and same distance from the firewall. Do not mount one speaker
higher, lower, further forward or further behind the other.
ONYX
OKC116 / OKC168 / OKC169
OSC213 / OSC216

ONYX
Flush Mount Method
Mounting Brackets
Mounting Bracket Screws
Mounting Bracket Washers
Surface Angle Mount Method
Cup Mounting Screws
Top Mounted Method
Cup Mounting Screws
Mounting Surface
Mounting Surface
Mounting Surface
IN OUT
T- T+ W- W+

OKC116
40
40 40
40
40
40
80
80 80
80
80
80
4
44
4
4
89
89 89
89
89
89
55 - 32,000
55 - 32,000 55 - 32,000
55 - 32,000
55 - 32,000
58 - 32,000

OKC168
40
40 40
40
40
40
80
80 80
80
80
80
4
44
4
4
89
89 89
89
89
89
55 - 32,000
55 - 32,000 55 - 32,000
55 - 32,000
55 - 32,000
55 - 32,000

OKC169
50
50 50
50
50
50
100
100 100
100
100
100
4
44
4
4
90
90 90
90
90
90
45 - 32,000
45 - 32,000 45 - 32,000
45 - 32,000
45 - 32,000
45 - 32,000

OSC213
40
40 40
40
40
40
80
80 80
80
80
80
4
44
4
4
88
88 88
88
88
88
55 - 32,000
55 - 32,000 55 - 32,000
55 - 32,000
55 - 32,000
55 - 32,000

OSC216
45
45 45
45
45
45
90
90 90
90
90
90
4
44
4
4
88
88 88
88
88
88
55 - 32,000
55 - 32,000 55 - 32,000
55 - 32,000
55 - 32,000
55 - 32,000
MBQUART SPEAKERS SPEAKER SYSTEM