McCulloch 967059700 User manual

EN, English
Operator's manual
ROB R600, ROB R800, ROB
R1000
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.

Contents
1 Introduction
1.1 Introduction.................................................3
1.2 Product overview........................................4
1.3 Symbols on the product..............................5
1.4 Symbols on the display.............................. 6
1.5 Symbols on the battery...............................6
1.6 Menu structure overview, ROB R600.........7
1.7 Menu structure overview, ROB R800,
ROB R1000...................................................... 8
1.8 Display........................................................9
1.9 Keypad ...................................................... 9
2 Safety
2.1 Safety definitions...................................... 10
2.2 General safety instructions.......................10
2.3 Safety instructions for operation...............12
3 Installation
3.1 Introduction - Installation.......................... 15
3.2 Before the installation of the wires........... 15
3.3 Before the installation of the product........15
3.4 Installation of the product......................... 19
3.5 To put the wire into position with stakes...21
3.6 To bury the boundary wire or the
guide wire....................................................... 21
3.7 To extend the boundary wire or the
guide wire....................................................... 21
3.8 After the installation of the product...........21
3.9 To do the product settings........................22
4 Operation
4.1 Main switch...............................................27
4.2 To start the product.................................. 27
4.3 Operating modes......................................27
4.4 To stop the product.................................. 28
4.5 To switch off the product.......................... 28
4.6 Timer and Standby................................... 28
4.7 To charge the battery............................... 29
4.8 Adjust the cutting height........................... 29
5 Maintenance
5.1 Introduction - maintenance.......................30
5.2 Clean the product..................................... 30
5.3 Replace the blades...................................31
5.4 Firmware update...................................... 31
5.5 Battery...................................................... 31
5.6 Winter service...........................................32
6 Troubleshooting
6.1 Introduction - troubleshooting...................33
6.2 Messages................................................. 33
6.3 Indicator lamp in the charging station.......37
6.4 Symptoms................................................ 38
6.5 Find breaks in the loop wire..................... 39
7 Transportation, storage and disposal
7.1 Transportation.......................................... 42
7.2 Storage.....................................................42
7.3 Disposal....................................................42
8 Technical data
8.1 Technical data.......................................... 43
9 Warranty
9.1 Warranty terms.........................................45
10 EC Declaration of Conformity
10.1 EC Declaration of Conformity.................46
21054 - 001 -

1 Introduction
1.1 Introduction
Serial number:
PIN code:
Product registration key:
The serial number is on the product rating plate and on the product carton.
• Use the serial number to register your product on www.mcculloch.com.
1.1.1 Support
For support about the McCULLOCH product,
speak to your McCULLOCH central service.
1.1.2 Product description
Note: McCULLOCH regularly updates the
appearance and function of the products. Refer
to
Support on page 3 .
The product is a robotic lawn mower. The product
has a battery power source and cuts the grass
automatically. Collection of grass is not
necessary.
The operator selects the operation settings with
the keys on the keypad. The display shows the
selected and possible operation settings, and the
operation mode of the product.
The boundary wire and the guide wire controls
the movement of the product within the work
area.
1054 - 001 - Introduction - 3

1.2 Product overview
1
235
16
17
6
18
19
21
20
10
9
8
7
11
12
13
27
15
14
25 26
24
23
22
4
The numbers in the illustration represent:
1. Body
2. Cover to display, keypad and cutting height
adjustment
3. Stop button
4. Contact strips
5. LED for operation check of the charging
station, boundary wire and guide wire
6. Charging station
7. Carry handle
8. Battery cover
9. Blade disc
10. Chassis box with electronics, battery and
motors
11. Main switch
12. Rear wheel
13. Charging strip
14. Keypad
15. Display
16. Loop wire for boundary loop and guide wire
17. Low voltage cable
18. Connector for connecting the loop wire to
the charging station
4 - Introduction 1054 - 001 -

19. Screws for securing the charging station
20. Power supply (the appearance of the power
supply may differ depending on market)
21. Stakes
22. Measurement gauge for help when installing
the boundary wire (the measurement gauge
is broken loose from the box)
23. Coupler for the loop wire
24. Operator’s Manual and Quick Guide
25. Extra blades
26. Alarm decal
27. Rating plate
1.3 Symbols on the product
These symbols can be found on the product.
Study them carefully.
WARNING: Read the
user instructions before
operating the product.
WARNING: Operate the
disabling device before
working on or lifting the
machine.
The product can only start
when the main switch is
set to 1 and the correct
PIN code has been en-
tered. Turn the main
switch to
0 before carry-
ing out any inspections
and/or maintenance.
WARNING: Keep a safe
distance from the ma-
chine when operating.
Keep your hands and feet
away from the rotating
blades.
WARNING: Do not ride
on the machine. Never
put your hands or feet
close to or under the ma-
chine.
Never use a high-pres-
sure washer or even run-
ning water to clean the
product.
Use a detachable power
supply as defined on the
rating label next to the
symbol.
This product conforms to the
applicable EC Directives.
Noise emission to surroundings. The
product’s emissions are set out in
Technical data on page 43 and on the
rating plate.
1054 - 001 - Introduction - 5