McCulloch Edition 1-R Owner's manual

www.mcculloch.biz
REPAIR PARTS MANUAL
MODEL NO. EDITION 1-R
(MFG. ID. NO. 96141016200)
Rotary Lawn Mower
532 41 20-77 01.09.07 BY Printed in U.S.A.

2
ROTARY LAWN MOWER - - MODEL NUMBER EDITION 1-R (MFG. ID. NO. 96141016200)
7
SERVICE NOTES

6
LIMITED WARRANTY
The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materials and workmanship. For a period of
two (2) years from date of purchase by the original consumer purchaser, we will re- pair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship. This
Warranty is subject to the following limitations and exclusions. 1. This warranty does not apply to the engine. Please contact your nearest dealer
where they will send the machine to the engine manufacturer.
2. Transportation charges for the movement of any power equipment unit or at-
tachment are the responsibility of the purchaser. Transportation charges for any parts submitted for replacement under this warranty must be paid by the purchaser unless such return is requested by your dealer.
3. Battery Warranty: On products equipped with a Battery, we will replace, without
charge to you, any battery which we find to be defective in manufacture, during the first ninety (90) days of ownership. After ninety (90) days, we will exchange the Battery, charging you 1/12 of the price of a new Battery for each full month from the date of the original sale. Battery must be maintained in accordance with the instructions furnished.
4. The Warranty period for any products used for rental or commercial purposes is
limited to 90 days from the date of original purchase.
5. This Warranty applies only to products which have been properly assembled,
adjusted, operated, and maintained in accordance with the instructions fur- nished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product.
6. Exclusions: Excluded from this Warranty are belts, blades, blade adapters, nor-
mal wear, normal adjustments, standard hardware and normal maintenance.
7. In case of any problem within the boundaries of this warranty, contact the near-
est department store, indicate the model number, serial number and the date of purchase of your machine. This warranty does not apply to accidental dam- ages. All implicit warranties are limited to the same time frames. Or contact:
THIS WARRANTY DOES NOT APPLY TO INCIDENTAL OR CONSEQUENTIAL DAMAGES. ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN.
E.M. Services 54 Rue Lambrechts 92400 Courbevoie France Telephone: [phone] Fax: [phone]
3
ROTARY LAWN MOWER - - MODEL NUMBER EDITION 1-R (MFG. ID. NO. 96141016200)
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
26 532 08 39-23 Hex Flange Nut
27 532 18 05-52 Wheel & Tire Assembly,
Rear, 14"
28 532 16 08-28 Shoulder Bolt 5/16-18 x .33
30 532 18 25-41 Axle Arm Assembly,
Rear, RH
31 532 19 00-69 Selector Knob
32 532 18 25-37 Selector Spring
33 873 80 05-00 Nut, Hex 5/16-18
34 532 18 25-42 Axle Arm Assembly,
Rear, LH
35 532 19 18-53 Hubcap
36 532 18 41-93 Bolt
37 874 78 05-12 Thread Cutting Screw
w/Sems 5/16-18 x 3/4
38 819 11 22-06 Spacer
39 532 19 85-41 Nut, Hex
40 532 19 09-39 Mounting Bracket,
Debris Shield
41 532 19 23-25 Screw, Debris Shield
43 532 40 58-45 Debris Shield
44 532 40 97-64 Kit, Lawn Mower Housing
(Includes Key Numbers
10, 11, 12 and 45)
45 532 18 21-66 Danger Decal
46 532 40 46-33 Blade Adapter / Pulley
KEY PART
NO. NO. DESCRIPTION
1 532 40 12-50 Upper Handle Assembly
(Includes Foam Grip)
2 532 15 36-05 Lower Handle
3 532 18 99-03 Control Bar
4 532 18 35-67 Engine Zone Control Cable
5 532 19 15-74 Handle Bolt
6 532 19 19-38 Handle Knob
7 532 05 17-93 Hairpin Cotter
8 532 06 64-26 Wire Tie
9 532 40 69-85 Rear Door Assembly
10 532 12 84-15 Pop Rivet
11 532 41 05-40 Support Bracket, LH
12 532 41 05-42 Support Bracket, RH
13 817 06 04-10 Screw 1/4-20 x 5/8
14 532 18 25-43 Handle Bracket, LH
15 532 18 25-45 Handle Bracket, RH
16 532 40 54-17 Spring, Rear Door, LH
17 532 40 54-18 Spring, Rear Door, RH
18 532 13 20-04 Locknut, Hex 1/4-20
19 532 19 47-88 Rope Guide
20 532 41 05-36 Foot Guard, C.E.
21 532 05 45-83 Screw, Tapping 1/4-20 x 1/2
24 - - - Engine, Honda, Model No.
GCV160 (order parts
from engine manufacturer)
25 532 15 04-06 Screw, Hex Head, Threaded,
Rolled 3/8-16 x 1-1/8
KEY PART
NO. NO. DESCRIPTION
47 532 19 93-77 Blade, 21"
48 532 85 10-74 Hardened Washer
49 532 85 02-63 Washer, Helical, Grade 8
3/8-24 x 1-3/8
50 532 85 10-84 Screw, Machine, Hex Head,
Grade 8 3/8-24 x 1-3/8
59 532 17 50-71 Discharge Deflector
60 532 17 57-35 Hinge Bracket Assembly
61 532 19 30-00 Spring, Hinge
62 532 17 56-50 Rod, Hinge
63 873 80 04-00 Locknut, Hex 1/4-20
64 532 17 50-66 Mulcher Door
65 532 19 74-80 O-Ring
66 532 08 83-48 Washer, Flat
69 532 16 42-65 Grip, Foam
96 532 19 79-91 Clip, Cable
- - 532 18 21-34 Decal, Warning (not shown)
- - 532 41 20-75 Operator’s Manual,
European
- - 532 41 20-73 Operator’s Manual,
Scandinavian
- - 532 41 20-76 Operator’s Manual,
East Bloc
- - 532 41 20-74 Operator’s Manual,
Baltic
- - 532 41 20-77 Repair Parts Manual
KEY PART
NO. NO. DESCRIPTION

4
ROTARY LAWN MOWER - - MODEL NUMBER EDITION 1-R (MFG. ID. NO. 96141016200)
5
ROTARY LAWN MOWER - - MODEL NUMBER EDITION 1-R (MFG. ID. NO. 96141016200)
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm.
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your lawn mower and void your warranty.
54 532 19 48-53 Grassbag Assembly
55 532 17 57-39 Driveshaft Cover
57 532 40 18-02 Frame, Grassbag
60 532 18 34-97 * Case, Lower
61 532 18 34-98 * Case, Upper
62 532 18 34-99 Gear, 27 Teeth
63 532 18 35-00 Lever, Clutch
64 532 18 35-01 Spring, Return
65 532 18 35-02 Shaft, Input
66 532 18 35-03 Dog, Movable
67 532 18 35-04 Dog, Fixed
68 532 18 35-05 Wire, Formed
69 532 18 35-06 Bearing, Ball
70 532 18 35-07 Fork, Shift
71 532 18 35-08 Seal, Output Shaft
72 532 18 35-09 Washer
73 532 18 35-10 Seal, Case
74 532 18 35-11 Bushing
75 532 19 66-13 Shaft, Output
76 532 18 35-13 Screw
77 532 18 35-14 Seal, Input Shaft
78 532 19 98-52 Drive Pulley
79 532 19 94-19 Retaining Pin
* Use Dow Corning #709 to reseal Gear Case Halves.
KEY PART
NO. NO. DESCRIPTION
1 532 18 45-88 Drive Control Assembly (Includes Cable)
2 532 16 73-87 Bearing, Wheel Adjuster
3 532 17 52-62 Screw, Pan Head, Self-Tapping #10-24 x 2-3/4
4 532 15 87-55 Screw, Hex Washer Head 1/4-20 x 2.12
5 532 17 54-36 V-Belt
6 532 15 04-95 Spring Retainer
7 532 19 17-30 Nut, Hex, Flanged 1/4-20
8 532 18 06-26 Hubcap
9 532 14 52-12 Locknut, Hex
11 532 18 07-75 Wheel & Tire Assembly, Front, 8"
12 812 00 00-58 E-Ring
13 532 40 38-49 Pinion
14 532 18 94-03 Dust Cover
15 532 19 10-17 Pawl, Drive
16 532 06 77-25 Washer 1/2 x 1-1/2 x .134
18 532 70 10-37 Selector Knob
28 532 18 14-67 Drive Cover
35 532 40 90-97 Kit, Wheel Adjuster, LH
(Includes Knob and Bearing)
36 532 19 92-05 Gear Case Assembly, Complete
38 873 80 04-00 Locknut, Hex 1/4-20
40 532 13 70-90 Spring
41 532 40 90-98 Kit, Wheel Adjuster, RH
(Includes Knob and Bearing)
KEY PART
NO. NO. DESCRIPTION