McDATA 1U Server Manual

1U Server
Installation and Service Manual
P/N 620-000276-000
REV A

1U Server Installation and Service Manual
ii
Record of Revisions and Updates
Copyright © 2006 McDATA Corporation. All rights reserved.
Printed May, 2006
First Edition
No part of this publication may be reproduced or distributed in any form or by any means, or stored in a
database or retrieval system, without the prior written consent of McDATA Corporation.
The information contained in this document is subject to change without notice. McDATA Corporation
assumes no responsibility for any errors that may appear.
All computer software programs, including but not limited to microcode, described in this document are
furnished under a license, and may be used or copied only in accordance with the terms of such license.
McDATA either owns or has the right to license the computer software programs described in this document.
McDATA Corporation retains all rights, title and interest in the computer software programs.
McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating
to this document, the products or the computer software programs described herein. McDATA
CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,
special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or
profits, arising out of this document, even if advised of the possibility of such damages.
©2006 McDATA Corporation. All rights reserved. McDATA, the McDATA logo, McDATA Eclipse,
Fabricenter, HotCAT, Intrepid, Multi-Capable Storage Network Solutions, Networking the World's Business
Data, nScale, nView, OPENready, SANavigator, SANpilot, SANtegrity, SANvergence, SecureConnect and
Sphereon are trademarks or registered trademarks of McDATA Corporation. OEM and Reseller logos are the
property of such parties and are reprinted with limited use permission. All other trademarks are the property
of their respective companies. All specifications subject to change.
Revision Date Description
620-000276-000 5/2006 Initial release l

Contents iii
Preface..............................................................................................................................ix
Safety Notices and Labels.......................................................................... i-xxii
Danger Notices..................................................................................... i-xxii
Caution Notices.................................................................................... i-xxii
Attention Notices................................................................................. i-xxii
Chapter 1 Installation
Overview..........................................................................................................1-1
Specifications ...................................................................................................1-1
General ......................................................................................................1-1
Electrical....................................................................................................1-2
Environmental..........................................................................................1-2
Physical Dimensions ...............................................................................1-2
Unpack, Inspect, and Install the 1U Server.................................................1-2
1U Server Rear Access Connectors .......................................................1-4
Configure Network Addresses.....................................................................1-4
Configure Private LAN Addresses .......................................................1-5
Configure Public LAN Addresses (Optional) .....................................1-5
Configure Server Information.......................................................................1-6
Access the Server Desktop .....................................................................1-6
Configure Management Server Names................................................1-6
Configure Gateway and DNS Server Addresses ................................1-7
Configure Windows Operating System Users ...........................................1-7
Change Default Administrator Password............................................1-7
Add a New User ......................................................................................1-8
Change User Properties ..........................................................................1-8
Set Date and Time...........................................................................................1-8
Accessing EFCM .............................................................................................1-9
Operating the 1U Server ..............................................................................1-10
Front Panel..............................................................................................1-10
Rear Panel ...............................................................................................1-12
Chapter 2 Maintenance
Error Indicators ...............................................................................................2-1
Status Indicators..............................................................................................2-2
Recommended Backup and Restore Process ..............................................2-2
Backup SAN Managed Data ..................................................................2-2
IRestore SAN Managed Data.................................................................2-3
Remove and Replace the 1U Server .............................................................2-4
Contents

1U Server Installation and Service Manual
iv
Contents
Remove the 1U Server ............................................................................ 2-4
Install the 1U Server................................................................................ 2-5
Remove and Replace the Hard Drive .......................................................... 2-5
Determine Which Hard Drive Has Failed ........................................... 2-5
Remove the Hard Drive.......................................................................... 2-6
Install the Hard Drive ............................................................................. 2-7
Restore New Hard Drive........................................................................ 2-7
Operating System Recovery.......................................................................... 2-9
Parts Catalog ................................................................................................... 2-9

v
1-1 1U Server Rear Panel Connections ............................................................ 1-4
1-2 1U Server Front View ................................................................................. 1-10
1-3 1U Server Front Panel Indicators ............................................................. 1-11
1-4 Rear View .................................................................................................... 1-12
2-1 IMSM Showing the Volume as Degraded (Advanced Mode) ............... 2-6
2-2 Remove Hard Drive ..................................................................................... 2-6
2-3 Install Hard Drive ......................................................................................... 2-7
2-4 Hard Drive to be Rebuilt ............................................................................. 2-8
2-5 IMSC showing the Rebuild process ........................................................... 2-8
Figures

vi 1U Server Installation and Service Manual
Figures

vii
1-1 Rear Access KVM and LAN Connections ................................................................ 1-4
1-2 1U Server Front (Connectors, Indicators, and Ports) ........................................... 1-10
1-3 1U Server Rear (Parts and Locations) ..................................................................... 1-12
2-1 Error LED Indicators ................................................................................................... 2-1
2-2 Status Indicators .......................................................................................................... 2-2
2-3 Parts Catalog List ......................................................................................................... 2-9
Tables

viii 1U Server Installation and Service Manual
Tables

Preface ix
Preface
This manual provides the information required to install and prepare
the 1U Server for configuration to operate in an equipment cabinet.
NOTE: In this information unit, the 1U Server is referred to as the server.
Who Should Use This
Manual
This publication is intended for trained service representatives
experienced with storage area network (SAN) and Fibre Channel
technology, and for IT professionals including experienced Data
Networking Administrators and System Architects.
This product contains no customer-serviceable parts that require
internal access to the product during normal operation or prescribed
maintenance conditions. In addition, refer to this manual for
instructions prior to performing any maintenance action.
Related
Documentation
Other publications that provide additional information about the
switch include:
•McDATA Products in a SAN Environment Planning Manual, P/N
620-000124.
• Rack Mount Kit for 1 U Products, Installation Instructions, P/N
958-000316.
•EFC Manager Software User Manual, P/N 620-000170.
Forwarding
Publication
Comments
We sincerely appreciate comments about this publication. Please
send comments to McDATA’s solution center by telephone, fax, or

x1U Server Installation and Service Manual
Preface
e-mail. Identify the manual and provide page numbers and specific
detail. Thank you.
Ordering Printed
Manuals
To order a copy of this manual, submit a purchase order as described
in Ordering McDATA Documentation Instructions, which is found on
McDATA’s web site, http://www.mcdata.com. To obtain
documentation CD-ROMs, contact your sales representative.
Trademarks McDATA, the McDATA logo, Fabricenter, HotCAT, Intrepid,
Multi-Capable Storage Network Solutions, Networking the World's
Business Data, nView, nScale OPENready, SANavigator, SANpilot,
SANtegrity, Sphereon, SANvergence, Storage Over IP, and SOIP are
trademarks or registered trademarks of McDATA Corporation or its
subsidiaries. All other trademarks are the property of their respective
owners in the United States or other countries or both.
Laser Compliance
Statement
Laser transceivers in the switches are tested and certified in the
United States to conform to Title 21 of the Code of Federal
Regulations (CFR), Subchapter J, Parts 1040.10 and 1040.11 for Class 1
laser products. Elsewhere, the transceivers are tested and certified to
be compliant with International Electrotechnical Commission
IEC825-1 and European Norm EN60825-1 and EN60825-2 regulations
for Class 1 laser products.
Class 1 laser products are not considered hazardous. The transceivers
are designed such that there is never human access to laser radiation
above a Class 1 level during normal operation or prescribed
maintenance conditions.
Federal
Communications
Commission (FCC)
Statement
The product generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with instructions
provided, may cause interference to radio communications. The
product was tested and found to comply with the limits for Class A
computing devices pursuant to Subpart B of Part 15 of the FCC Rules,
which are designed to provide reasonable protection against such
interference in a residential environment. Any modification or
change made to the product without explicit approval from
McDATA, by means of a written endorsement or through published
literature, invalidates the service contract and voids the warranty
agreement with McDATA.
Canadian EMC Statements
The statements below indicate product compliance with Interference
Causing Equipment Standard (ICES) and Norme sur le Matériel

Preface xi
Preface
Brouiller (NMB) electromagnetic compatibility (EMC) requirements
as set forth in ICES/NMB-003, Issue 4.
• This Class B digital apparatus complies with Canadian ICES-003.
• Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
United States and Canada UL Certification
The C-UL-US mark on the product indicates compliance with
American National Standards Institute (ANSI) and Standards
Council of Canada (SCC) safety requirements as tested, evaluated,
and certified by Underwriters Laboratories Inc. (UL) and
Underwriters Laboratories of Canada (ULC).
International Safety Conformity Declaration (CB Scheme)
A certification bodies (CB) test report supports the product,
indicating safety compliance with the International Electrotechnical
Commission (IEC) system for conformity testing and certification of
electrical equipment (IECEE) CB scheme.
The CB scheme is a multilateral agreement among participating
countries and certification organizations that accepts test reports
certifying the safety of electrical and electronic products.
European Union Conformity Declarations and Directives (CE Mark)
The CE mark on the product indicates compliance with the following
regulatory requirements as set forth by European Norms (ENs) and
relevant international standards for commercial and light industrial
information technology equipment (ITE):
•EN55022: 1998 - ITE-generic radio frequency interference (RFI)
emission standard for domestic, commercial, and light industrial
environments, including electrical business equipment.
•EN55024-1: 1998 - ITE-generic electromagnetic immunity
standard for domestic, commercial, and light industrial
environments, including electrical business equipment.
•EN60950/A11:1997 - ITE-generic electrical and fire safety
standard for domestic, commercial, and light industrial
environments, including electrical business equipment.
•EN61000-3-2:1995 - ITE-generic harmonic current emissions
standard for domestic, commercial, and light industrial
environments (equipment with rated current less than or
equal to 16 amperes per phase).

xii 1U Server Installation and Service Manual
Preface
•EN61000-3-3:1995 - ITE-generic voltage fluctuation and flicker
standard (low-voltage power supply systems) for domestic,
commercial, and light industrial environments (equipment with
rated current less than or equal to 16 amperes per phase).
In addition, the European Union (EU) Council has implemented a
series of directives that define product safety standards for member
countries. The following directives apply to the product:
• The product conforms with all protection requirements of EU
directive 89/336/EEC (Electromagnetic Compatibility Directive)
in accordance with the laws of the member countries relating to
EMC emissions and immunity.
• The product conforms with all protection requirements of EU
directive 73/23/EEC (Low-Voltage Directive) in accordance with
the laws of the member countries relating to electrical safety.
• The product conforms with all protection requirements of EU
directive 93/68/EEC (Machinery Directive) in accordance with
the laws of the member countries relating to safe electrical and
mechanical operation of the equipment.
McDATA does not accept responsibility for any failure to satisfy the
protection requirements of any of these directives resulting from a
non-recommended or non-authorized modification to the product.
European Union EMC and Safety Declaration (N-Mark)
The N-mark on the product indicates compliance with European
Union EMC and safety requirements as tested, evaluated, and
certified by the Norwegian Board for Testing and Approval of
Electrical Equipment (Norges Elektriske Materiellkontroll or
NEMKO) laboratory or a NEMKO-authorized laboratory.
Argentina IRAM Certification
The Instituto Argentino de Normalización (IRAM) S-mark on the
product indicates compliance with Direccion Nacional de Comercio
Interior (DNCI) Resolution Number 92/98, Phase III (for information
technology equipment safety). In conjunction with the S-mark is the
AR-UL mark, certified by UL de Argentina, S.R.L., and accredited by
the Argentine Accreditation Organization (OAA).

Preface xiii
Preface
Australia and New Zealand C-Tick Mark
The Australia and New Zealand regulatory compliance mark (C-Tick
mark) on the product indicates compliance with regulatory
requirements for EMC (for information technology equipment) as set
forth by the Australian Communications and Media Authority
(ACMA) and the Radio Spectrum Management Group (RSM) of New
Zealand. The product complies with the electrical safety
requirements prescribed by the Australian and New Zealand
Electrical Safety Regulators.
People’s Republic of China CCC Mark
The China Compulsory Certification mark (CCC mark) on the
product indicates compliance with People’s Republic of China
regulatory requirements for safety and EMC (for information
technology equipment) as set forth by the National Regulatory
Commission for Certification and Accreditation.
Chinese National
Standards Statement
The Taiwanese Bureau of Standards, Metrology, and Inspection mark
(BSMI mark) and the Chinese National Standards (CNS) statement
below indicate product compliance with Taiwanese regulatory
requirements. The statement indicates in a domestic environment the
product may cause radio interference, in which case the user is
required to take corrective actions.
German GS Mark The Geprüfte Sicherheit mark (GS mark) on a product indicates
compliance with the German Safety of Equipment Act as tested by
Underwriters Laboratories International Demko A/S, and accredited
by the Central Office of Safety of the German Länder (Zentralstelle
der Länder für Sicherheitstechnik or ZLS).

xiv 1U Server Installation and Service Manual
Preface
Japanese VCCI Statement
The Voluntary Control Council for Interference (VCCI) statement
below applies to information technology equipment, and indicates
product compliance with Japanese regulatory requirements. The
statement indicates the product is a Class B product, and in a
domestic environment may cause radio interference, in which case
the user is required to take corrective actions.
Korean MIC Mark
The Korean Ministry of Information and Communications mark
(MIC mark) on the product indicates compliance with regulatory
requirements for safety and EMC (for information technology
equipment) as authorized and certified by the Korean Radio
Research Institute (RRI).
Mexican NOM Mark
The Official Mexican Standard (Normas Oficiales Mexicanas or
NOM) mark on the product indicates compliance with regulatory
requirements for safety (for information technology equipment) as
authorized and accredited by the National System of Accreditation of
Testing Laboratories (Sistema Nacional de Acreditamieno de
Laboratorios de Pruebas or SINALP).
Russian GOST Certification
The Russian Gosudarstvennyi Standart (GOST) mark on the product
indicates compliance with regulatory requirements for safety and
EMC (for information technology equipment) as authorized and
accredited by the State Committee for Standardization, Metrology
and Certification.
NOM

Preface xv
Preface
South African SABS Certification
The South African Bureau of Standards (SABS) mark on the product
indicates compliance with regulatory requirements for safety and
EMC (for information technology equipment) as authorized and
accredited by the Independent Communications Authority of South
Africa (ICASA).
Waste Management
Information for
European Union
Do not discard this product. European Union Directive 2002/96/EC
requires this product to be recycled at the end of the product's useful
life. Please follow all waste management actions defined by this
Directive. Directive requirements may be superseded by EU member
nation law.
For assistance with waste management efforts, please perform the
following steps to identify pertinent information:
1. Review the original purchase contract to determine who to
contact regarding waste management of this product; OR
2. Contact the company this product was procured from.

xvi 1U Server Installation and Service Manual
Preface

Preface xvii
Preface

xviii 1U Server Installation and Service Manual
Preface

Preface xix
Preface

xx 1U Server Installation and Service Manual
Preface