McDATA Intrepid 6064 Director Manual

380 Interlocken Crescent Broomfield, CO 80021-3464
Corporate Headquarters: 800-545-5773
Sales E-mail: [e-mail] Web: www.mcdata.com
Intrepid®6064 Director
Installation and Service Manual
P/N 620-000108-930
REV A

Intrepid® 6064 Director Installation and Service Manual
ii
Record of Revisions and Updates
Revision Date Description
620-000108-100 2/2001 Initial release of the manual
620-000108-200 5/2001 Updates to describe Release 4.1 of the Enter-
prise Fabric Connectivity Manager application.
620-000108-300 6/2001 Additional updates to describe Release 4.1 of
the Enterprise Fabric Connectivity Manager
application.
620-000108-400 11/2001 Updates to describe Release 4.2 of the Enter-
prise Fabric Connectivity Manager application.
620-000108-500 5/2002 Updates to describe change from 1 to 2 giga-
bits/second and Release 6.0 of the Enterprise
Fabric Connectivity Manager application.
620-000108-600 9/2002 Updates to describe Release 6.1 of the Enter-
prise Fabric Connectivity Manager application.
620-000108-700 10/2002 Updates to describe Release 6.2 and 6.3 of the
Enterprise Fabric Connectivity Manager applica-
tion.
620-000108-800 2/2003 Updates to describe Release 7.1 of the Enter-
prise Fabric Connectivity Manager application.
New cover and new format.
620-000108-801 6/2003 Updates to describe new firmware and software
download procedures from McDATA’s home
page.
620-000108-900 8/2003 Revision of the manual to describe the one unit
(1U) rack-mount server and Release 7.2 of the
Enterprise Fabric Connectivity Manager applica-
tion.

Intrepid® 6064 Director Installation and Service Manual
iii
Copyright © 2000-2005 McDATA Corporation. All rights reserved.
Printed July 2005
Twelfth Edition
No part of this publication may be reproduced or distributed in any form or by any means, or stored in a
database or retrieval system, without the prior written consent of McDATA Corporation.
The information contained in this document is subject to change without notice. McDATA Corporation
assumes no responsibility for any errors that may appear.
All computer software programs, including but not limited to microcode, described in this document are
furnished under a license, and may be used or copied only in accordance with the terms of such license.
McDATA either owns or has the right to license the computer software programs described in this document.
McDATA Corporation retains all rights, title and interest in the computer software programs.
McDATA Corporation makes no warranties, expressed or implied, by operation of law or otherwise, relating
to this document, the products or the computer software programs described herein. McDATA
CORPORATION DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
A PARTICULAR PURPOSE. In no event shall McDATA Corporation be liable for (a) incidental, indirect,
special, or consequential damages or (b) any damages whatsoever resulting from the loss of use, data or
profits, arising out of this document, even if advised of the possibility of such damages.
620-000108-910 12/2003 Revision of the manual to describe Release
8.0/8.1 of the Enterprise Fabric Connectivity
Manager application. New style for safety
notices. Addition of translated safety notices.
620-000108-920 11/2004 Revision of the manual to describe Release 8.5
of the Enterprise Fabric Connectivity Manager
application, and the 10 Gbps (XPM) port card
and functionality.
620-000108-930 7/2005 Revision of the manual to describe Release 8.7
of the Enterprise Fabric Connectivity Manager
(EFCM) and EFCM Basic Edition application
and functionality.

Intrepid® 6064 Director Installation and Service Manual
iv

Contents
v
Preface.......................................................................................................................... xvii
Chapter 1 General Information
Director Description .........................................................................1-1
Field-Replaceable Units ...................................................................1-4
Cable Management Assembly.................................................1-5
Front Bezel..................................................................................1-5
CTP2 Card...................................................................................1-5
UPM Card...................................................................................1-7
SFP Transceivers........................................................................1-8
Power Supply.............................................................................1-9
RFI Shield....................................................................................1-9
Power Module Assembly .......................................................1-10
Fan Module...............................................................................1-10
SBAR Assembly .......................................................................1-10
Backplane..................................................................................1-11
Error-Detection, Reporting, and Serviceability Features ..........1-11
Element Manager Status Indicators .............................................1-13
Tools and Test Equipment..............................................................1-14
Tools Supplied with the Director...........................................1-14
Tools Supplied by Service Personnel....................................1-16
Director Management ....................................................................1-17
Chapter 2 Installation Tasks
Factory Defaults................................................................................2-1
Installation Task Summary..............................................................2-3
Task 1: Verify Installation Requirements.......................................2-5
Task 2: Unpack, Inspect, and Install the Ethernet Hub (Optional).
Contents

Intrepid® 6064 Director Installation and Service Manual
vi
Contents
2-6 Unpack and Inspect Ethernet Hub .........................................2-6
Desktop Installation..................................................................2-7
Rack-Mount Installation...........................................................2-8
Task 3: Unpack, Inspect, and Install the Director.........................2-9
Task 4: Configure Director at the EFCM Basic Edition Interface
(Optional).........................................................................................2-12
Configure Director Identification..........................................2-13
Configure Date and Time.......................................................2-14
Configure Parameters.............................................................2-15
Configure Fabric Parameters.................................................2-17
Configure Network Information...........................................2-18
Configure Basic Port Information.........................................2-20
Configure Port BB_Credit ......................................................2-21
Configure Port NPIV...............................................................2-21
Configure SNMP .....................................................................2-22
Enable CLI ................................................................................2-23
Enable or Disable Host Control.............................................2-24
Configure SSL Encryption......................................................2-25
Install PFE Keys (Optional)....................................................2-26
Configure Security...................................................................2-28
Configure Interswitch Links..................................................2-30
Task 5: Configure Director Network Information (Optional) ..2-30
Task 6: Unpack, Inspect, and Install the Management Server..2-34
Task 7: Configure Server Password and Network Addresses..2-36
Configure Password................................................................2-36
Configure Private LAN Addresses.......................................2-37
Configure Public LAN Addresses (Optional).....................2-38
Task 8: Configure Management Server Information .................2-38
Access the Management Server Desktop.............................2-38
Configure Management Server Names................................2-39
Configure Gateway and DNS Server Addresses................2-40
Task 9: Configure Windows Operating System Users ..............2-42
Change Default Administrator Password ...........................2-42
Add a New User......................................................................2-42
Change User Properties..........................................................2-43
Task 10: Set Management Server Date and Time .......................2-44
Task 11: Configure the Call-Home Feature (Optional)..............2-46
Task 12: Assign User Names and Passwords .............................2-47
Task 13: Configure the Director to the Management Application..
2-48
Task 14: Record or Verify Server Restore Information ..............2-49
Task 15: Verify Director-to-Server Communication...................2-50

vii
Contents
Contents
Task 16: Configure PFE Key (Optional) ...................................... 2-51
Task 17: Configure Management Server (Optional).................. 2-53
Task 18: Set Director Date and Time............................................ 2-54
Task 19: Configure the Element Manager Application.............2-55
Configure Director Identification.........................................2-56
Configure Director Parameters............................................. 2-56
Configure Fabric Parameters................................................. 2-58
Configure Ports ....................................................................... 2-60
Configure SNMP.....................................................................2-61
Configure Threshold Alerts................................................... 2-62
Enable EFCM Basic Edition and Telnet Access.................. 2-65
Configure, Enable, and Test E-mail Notification ............... 2-65
Configure and Enable Ethernet Events................................ 2-67
Configure, Enable, and Test Call-Home Event Notification ....
2-67
Configure Security.................................................................. 2-68
Configure Interswitch Links.................................................. 2-69
Task 20: Back Up Configuration Data .........................................2-70
Task 21: Cable Fibre Channel Ports ............................................. 2-73
Task 22: Configure Zoning (Optional) ........................................ 2-73
Task 23: Connect Director to a Fabric Element (Optional).......2-74
Task 24: Register with the McDATA Filecenter ......................... 2-75
Chapter 3 Maintenance Analysis Procedures (MAPS)
Factory Defaults ............................................................................... 3-1
Quick Start......................................................................................... 3-2
MAP 0000: Start MAP...................................................................... 3-8
MAP 0100: Power Distribution Analysis.................................... 3-13
MAP 0200: POST Failure Analysis .............................................. 3-16
MAP 0300: Loss of Server Communication................................ 3-20
MAP 0400: FRU Failure Analysis.................................................3-30
MAP 0500: Port Failure or Link Incident Analysis....................3-34
MAP 0600: Fabric or ISL Problem Analysis ............................... 3-48
Chapter4 RepairInformation
Factory Defaults ........................................................................ 4-2
Procedural Notes.......................................................................4-2
Obtaining Log Information............................................................. 4-3
SAN Management Logs........................................................... 4-3
Element Manager Logs ............................................................4-5
EFCM Basic Edition Logs......................................................... 4-8

Intrepid® 6064 Director Installation and Service Manual
viii
Contents
Obtaining Port Diagnostic Information.......................................4-11
Port LED Diagnostics..............................................................4-11
Element Manager Application Diagnostics.........................4-12
EFCM Basic Edition Diagnostics...........................................4-17
Performing Loopback Tests...........................................................4-21
Internal Loopback Test (Element Manager Application)..4-21
External Loopback Test (Element Manager Application) .4-23
Internal Loopback Test (EFCM Basic Edition)....................4-24
External Loopback Test (EFCM Basic Edition) ...................4-26
Blocking and Unblocking Ports....................................................4-27
BlockorUnblockaPortorPortCard(ElementManagerAp-
plication)...................................................................................4-27
Block or Unblock a Port (EFCM Basic Edition)...................4-28
Swapping Ports...............................................................................4-29
Performing Channel Wrap Tests (FICON)..................................4-31
Collecting Maintenance Data........................................................4-32
Collecting Maintenance Data (Element Management Appli-
cation)........................................................................................4-32
Collecting Maintenance Data (EFCM Basic Edition)..........4-33
Powering the Director On or Off..................................................4-34
Power-On Procedure ..............................................................4-34
Power-Off Procedure..............................................................4-35
Setting the Director Online or Offline..........................................4-36
Set Online or Offline (Element Manager Application) ......4-36
Set Online or Offline (EFCM Basic Edition) ........................4-37
IML, IPL, or Reset the Director.....................................................4-38
IML the Director (CTP Front Panel) .....................................4-38
IPL the Director (Element Manager Application) ..............4-39
Reset the Director (CTP Front Panel) ..................................4-39
Cleaning Fiber-Optic Components ..............................................4-40
Downloading Director Firmware and Software ........................4-41
Download Firmware and Software from Filecenter ..........4-42
Download Firmware and Software to Director (Element
Manger Application)...............................................................4-44
Download Firmware and Software to Director (EFCM Basic
Edition)......................................................................................4-46
Installing or Upgrading Software.................................................4-47
Managing Configuration Data......................................................4-50
Back Up Configuration (Element Manager Application)..4-50
Restore Configuration (Element Manager Application)....4-50
Reset Configuration Data (Element Manager Application).....
4-51
Back Up Configuration (EFCM Basic Edition)....................4-54

ix
Contents
Contents
Restore Configuration (EFCM Basic Edition)..................... 4-54
Reset Configuration Data (EFCM Basic Edition) ............... 4-55
Chapter 5 Removal and Replacement Procedures (RRPs)
Factory Defaults ........................................................................ 5-1
Procedural Notes....................................................................... 5-2
Removing and Replacing FRUs..................................................... 5-3
ESD Information........................................................................ 5-3
Concurrent FRUs....................................................................... 5-5
Nonconcurrent FRUs................................................................ 5-5
RRP: Cable Management Assembly..............................................5-6
RRP: CTP2 Card ............................................................................... 5-8
RRP: Port Module Card (UPM).................................................... 5-13
RRP: Optical Transceiver (SFP) ....................................................5-18
RRP: Filler Blank (UPM)................................................................5-22
RRP: Power Supply........................................................................ 5-24
RRP: RFI Shield............................................................................... 5-28
RRP: SBAR Assembly.................................................................... 5-29
RRP: Fan Module ...........................................................................5-33
RRP: Power Module Assembly.................................................... 5-37
RRP: Backplane............................................................................... 5-41
Chapter 6 Illustrated Parts Breakdown
Front-Accessible FRUs..................................................................... 6-2
Rear-Accessible FRUs...................................................................... 6-4
Miscellaneous Parts ......................................................................... 6-6
Power Cords and Receptacles ........................................................ 6-8
Appendix A Event Code Tables
System Events (000 through 199) .................................................A-3
Power Supply Events (200 through 299) ...................................A-25
Fan Module Events (300 through 399) ......................................A-29
CTP/CTP2 Card Events (400 through 499) .............................. A-37
Port Card (UPM) Events (500 through 599) .............................. A-50
SBAR Events (600 through 699) .................................................A-62
Thermal Events (800 through 899) .............................................A-66
Appendix B Director Specifications
Physical Characteristics............................................................B-1
Shipping and Storage Environment.......................................B-2

Intrepid® 6064 Director Installation and Service Manual
x
Contents
Operating Environment........................................................... B-2
Fabricenter Equipment Cabinet Service Clearances............ B-3
Appendix C Management Server and Ethernet Hub
Management Server Description...................................................C-1
Management Server Specifications........................................C-2
Ethernet Hub Description ..............................................................C-2
Appendix D Restore Management Server
Requirements ...................................................................................D-1
Restore Management Server Procedure ......................................D-2
Appendix E Safety Notices (Multi-Lingual Translations)
Glossary ........................................................................................................................g-1
Index ................................................................................................................................i-1

Figures
xi
1-1 Cabinet-Mounted Intrepid 6064 Directors and Management Server ... 1-3
1-2 Director FRUs (Front Access) ..................................................................... 1-4
1-3 Director FRUs (Rear Access) ....................................................................... 1-5
1-4 UPM Card LEDs and Connectors .............................................................. 1-8
1-5 Small Form-Factor Pluggable (SFP) transceiver ...................................... 1-9
1-6 Torque Tool and Hex Adapter ................................................................. 1-15
1-7 Door Key ...................................................................................................... 1-15
1-8 Loopback Plug ............................................................................................ 1-15
1-9 Fiber-Optic Protective Plug ....................................................................... 1-16
1-10 Null Modem Cable ..................................................................................... 1-16
2-1 Patch Cable and MDI Selector Configuration .......................................... 2-8
2-2 Mounting Bracket Installation (Ethernet Hub) ........................................ 2-8
2-3 AC Power Connections (Director) ........................................................... 2-11
2-4 Identification View ..................................................................................... 2-14
2-5 Date Time View .......................................................................................... 2-15
2-6 Parameters View ......................................................................................... 2-15
2-7 Fabric Parameters View ............................................................................. 2-17
2-8 Network View ............................................................................................. 2-19
2-9 Basic Information View ............................................................................. 2-21
2-10 SNMP View ................................................................................................. 2-22
2-11 CLI View ...................................................................................................... 2-24
2-12 OSMS View .................................................................................................. 2-24
2-13 SSL View ...................................................................................................... 2-26
2-14 Maintenance Feature Installation View .................................................. 2-28
2-15 Connection Description Dialog Box ........................................................ 2-32
2-16 1U Management Server Connections ...................................................... 2-35
2-17 Identification Changes Dialog Box .......................................................... 2-40
2-18 Internet Protocol (TCP/IP) Properties Dialog Box ................................ 2-41
Figures

xii
Intrepid® 6064 Director Installation and Service Manual
Figures
2-19 Add New User Wizard ............................................................................... 2-43
2-20 Properties Dialog Box (General Tab) ........................................................ 2-44
2-21 Date/Time Properties Dialog Box (Time Zone Tab) .............................. 2-45
2-22 Date/Time Properties Dialog Box (Date & Time Tab) .......................... 2-46
2-23 Add User Dialog Box .................................................................................. 2-47
2-24 Address Properties Dialog Box (IP Address Page) ................................ 2-49
2-25 New Feature Key Dialog Box .................................................................... 2-53
2-26 Configure Date and Time Dialog Box ...................................................... 2-54
2-27 Configure Identification Dialog Box ........................................................ 2-56
2-28 Configure Switch Parameters Dialog Box ............................................... 2-57
2-29 Configure Fabric Parameters Dialog Box ................................................ 2-58
2-30 Configure Ports Dialog Box ....................................................................... 2-60
2-31 Configure SNMP Dialog Box .................................................................... 2-62
2-32 New Threshold Alert Dialog Box (Screen 1) ........................................... 2-63
2-33 New Threshold Alert Dialog Box (Screen 2) ........................................... 2-64
2-34 New Threshold Alert Dialog Box (Screen 3) ........................................... 2-65
2-35 Email Event Notification Setup Dialog Box ............................................ 2-66
2-36 InCD Icon (Unformatted CD) .................................................................... 2-71
2-37 McDATA Filecenter Home Page .............................................................. 2-76
3-1 Daisy-Chained Ethernet Hubs .................................................................. 3-24
3-2 UPM Card Diagram (OSI) .......................................................................... 3-44
3-3 UPM Card Diagram (FICON) ................................................................... 3-44
4-1 Port List View .............................................................................................. 4-13
4-2 Port Properties Dialog Box ........................................................................ 4-15
4-3 Port Technology Dialog Box ...................................................................... 4-17
4-4 Port List View .............................................................................................. 4-18
4-5 Port Diagnostics Dialog Box ...................................................................... 4-22
4-6 Diagnostics View ......................................................................................... 4-25
4-7 Basic Information View .............................................................................. 4-29
4-8 Swap Ports Dialog Box ............................................................................... 4-30
4-9 Save Data Collection Dialog Box .............................................................. 4-32
4-10 System Files View ....................................................................................... 4-33
4-11 Set Online State Dialog Box ....................................................................... 4-37
4-12 Switch View ................................................................................................. 4-37
4-13 Clean Fiber-Optic Components ................................................................ 4-41
4-14 McDATA Filecenter Home Page .............................................................. 4-42
4-15 Firmware Library Dialog Box .................................................................... 4-44
4-16 Firmware Upgrade View ........................................................................... 4-46
4-17 InstallShield Wizard Dialog Box ............................................................... 4-48
4-18 Backup and Restore Configuration Dialog Box ...................................... 4-50
4-19 Reset Configuration Dialog Box ................................................................ 4-51

Figures
xiii
Figures
4-20 Discover Setup Dialog Box ........................................................................ 4-52
4-21 Address Properties Dialog Box ................................................................ 4-53
4-22 Backup Configuration View ..................................................................... 4-54
4-23 Restore Configuration View ..................................................................... 4-55
5-1 ESD Grounding Point (Front) ..................................................................... 5-4
5-2 ESD Grounding Point (Rear) ...................................................................... 5-4
5-3 Cable Management Assembly Removal and Replacement .................... 5-7
5-4 CTP2 Card Removal and Replacement ..................................................... 5-9
5-5 UPM Card Removal and Replacement ................................................... 5-15
5-6 SFP Optical Transceiver Removal and Replacement ............................ 5-19
5-7 Filler Blank Removal and Replacement .................................................. 5-23
5-8 Power Supply Removal and Replacement ............................................. 5-25
5-9 RFI Shield Removal and Replacement .................................................... 5-28
5-10 SBAR Assembly Removal and Replacement .......................................... 5-30
5-11 Fan Module Removal and Replacement ................................................. 5-34
5-12 Power Module Assembly Removal and Replacement .......................... 5-38
5-13 Backplane Removal and Replacement .................................................... 5-43
5-14 Connection Description Dialog Box ........................................................ 5-46
5-15 Connect To Dialog Box .............................................................................. 5-46
5-16 COMn Dialog Box ...................................................................................... 5-47
5-17 HyperTerminal Dialog Box ....................................................................... 5-48
5-18 HyperTerminal Dialog Box ....................................................................... 5-48
6-1 Front-Accessible FRUs ................................................................................. 6-2
6-2 Rear-Accessible FRUs .................................................................................. 6-4
6-3 Miscellaneous Parts ...................................................................................... 6-6
6-4 Power Cords and Receptacles .................................................................... 6-8
C-1 Management Server ..................................................................................... C-1
C-2 24-Port Ethernet Hub ................................................................................... C-3
D-1 Run Dialog Box ............................................................................................ D-4
D-2 VNC Authentication Screen ....................................................................... D-5
D-3 Welcome to Windows Dialog Box ............................................................ D-5
D-4 Log On to Windows Dialog Box ............................................................... D-6
D-5 EFCM Log In or SANavigator Log In Log In Dialog Box ...................... D-6

xiv
Intrepid® 6064 Director Installation and Service Manual
Figures

Tables
xv
1-1 Element Manager Alert Symbols, Messages, and Status ...................... 1-13
2-1 Factory-Set Defaults (Director) ................................................................... 2-1
2-2 Factory-Set Defaults (Management Server) .............................................. 2-2
2-3 Installation Task Summary ......................................................................... 2-3
2-4 Operational States and Symbols ............................................................... 2-51
3-1 Factory-Set Defaults ..................................................................................... 3-1
3-2 MAP Summary ............................................................................................. 3-2
3-3 Event Codes versus Maintenance Action ................................................. 3-2
3-4 MAP 100 Event Codes ............................................................................... 3-13
3-5 MAP 200 Event Codes ............................................................................... 3-16
3-6 MAP 200: Byte 0 FRU Codes ..................................................................... 3-16
3-7 MAP 300 Error Messages .......................................................................... 3-22
3-8 MAP 400: Event Codes .............................................................................. 3-30
3-9 MAP 500: Event Codes .............................................................................. 3-34
3-10 Link Incident Messages ............................................................................. 3-35
3-11 Invalid Attachment Reasons and Actions ............................................... 3-36
3-12 Inactive Port Reasons and Actions ........................................................... 3-41
3-13 MAP 600 Event Codes ............................................................................... 3-48
3-14 E_Port Segmentation Reasons and Actions ............................................ 3-50
3-15 Port Fence Codes and Actions .................................................................. 3-55
3-16 Fabric Merge Failure Reasons and Actions ............................................ 3-58
4-1 Factory-Set Defaults ..................................................................................... 4-2
4-2 Port Operational States .............................................................................. 4-11
5-1 Factory-Set Defaults ..................................................................................... 5-1
5-2 Concurrent FRUs .......................................................................................... 5-5
Tables

xvi
Intrepid® 6064 Director Installation and Service Manual
Tables
5-3 Nonconcurrent FRUs .................................................................................... 5-5
6-1 Front-Accessible FRU Parts List .................................................................. 6-3
6-2 Rear-Accessible FRU Parts List ................................................................... 6-5
6-3 Miscellaneous Parts ...................................................................................... 6-7
6-4 Power Cord and Receptacle List ................................................................. 6-9

Intrepid® 6064 Director Installation and Service Manual
xvii
Preface
This publication is part of a documentation suite that supports the
McDATA® Intrepid® 6064 Director.
Who Should Use This
Manual This publication is intended for installation and service
representatives experienced with the director, storage area network
(SAN) technology, and Fibre Channel technology.
Organization of This
Manual This publication includes six chapters and four appendices organized
as follows:
Chapter 1,General Information.Thischapterdescribesthedirector,
including field-replaceable units (FRUs), controls, connectors,
and indicators, and director specifications. The chapter also
describes the maintenance approach, director management
through the Enterprise Fabric Connectivity (EFC) Server, EFCM
Basic Edition interface, or a remote workstation, error detection
and reporting features, serviceability features, software
diagnostic features, and tools and test equipment.
Chapter 2,Installation Tasks. This chapter describes tasks to install,
configure, and verify operation of the director, optional Ethernet
hub, and management server.
Chapter 3,Maintenance Analysis Procedures (MAPS). This chapter
describes maintenance analysis procedures (MAPs) to fault
isolate a director problem to an individual FRU.
Chapter 4,Repair Information. This chapter describes
supplementary diagnostic and repair procedures for a failed
director. The chapter includes procedures to display and use log
information, perform port diagnostics, manage configuration

xviii
Intrepid® 6064 Director Installation and Service Manual
Preface
data, collect maintenance data, power-on, power-off, and reset
the director, set the director online or offline, block ports, manage
director firmware, clean fiber optics, and install or upgrade
management server software.
Chapter 5,Removal and Replacement Procedures (RRPs).This
chapter describes procedures to remove and replace director
FRUs.
Chapter 6,Illustrated Parts Breakdown. This chapter illustrates,
describes, and shows the location of director FRUs. In addition,
FRUs are cross-referenced to corresponding part numbers.
Appendix A,Event Code Tables This appendix provides an
explanation of event codes that appear at the Element Manager
application or EFCM Basic Edition interface. The event severity
andarecommendedcourseofactioninresponsetoeacheventare
also provided.
Appendix B,Director Specifications. This appendix provides the
director specifications including its physical characteristics, and
storage, shipping, and operating environments.
Appendix C,Management Server and Ethernet Hub. This appendix
provides the management-server specifications and a description
of the ethernet hub.
Appendix D,Restore Management Server This appendix provides
the instructions to restore all required director applications to the
management server in case of a hard drive failure.
Appendix E,Safety Notices (Multi-Lingual Translations) This
appendix provides the translation of the safety notices in this
publication.
AGlossary defines terms, abbreviations, and acronyms used in the
manual. An Index is also provided.

Intrepid® 6064 Director Installation and Service Manual
xix
Preface
Related Publications Other publications that provide additional information about the
director include:
•McDATA Products in a SAN Environment Planning Manual
(620-000124).
•McDATA Intrepid 6140 and 6064 Directors Element Manager User
Manual (620-000153).
•McDATA Enterprise Fabric Connectivity Manager User Manual
(620-005001).
•McDATA EFCM Basic Edition User Manual (620-000160).
•McDATA SNMP Support Manual (620-000131).
•McDATA E/OS Command Line Interface User Manual (620-000134).
•McDATA Rack-Mount Kit, Intrepid 6064 Director in Fabricenter
(FC-512) Cabinet, Installation Instructions (958-000270).
•McDATA EFCM Lite Installation Instructions (958-000171).
•1U Server Rack-Mount Kit Installation Instructions (958-000310).
•SANavigatorUserGuide(621-000013).
•McDATA FC-512 Fabricenter Equipment Cabinet Installation and
Service Manual (620-000100).
Ordering Printed
Manuals To order a printed copy of this publication, contact your McDATA
representative or contact McDATA at the phone number or fax
number listed below.
Phone: [phone] and select the option for information about
McDATA’s complete family of enterprise-to-edge SAN solutions.
Fax: [phone]
Where to Get Help For technical support, contact the McDATA Solution Center. The
center provides a single point of contact, and is staffed 24 hours a day,
seven days a week, including holidays. Contact the center at the
phone number, fax number, or e-mail address listed below. Please
have the product serial number (printed on the service label attached
to the director) available.
Phone: [phone] or [phone]
Fax: [phone]
E-mail: [e-mail]

xx
Intrepid® 6064 Director Installation and Service Manual
Preface
For technical support for the SANavigator®application, contact the
SANavigatorSolutionCenteratthephonenumberore-mailaddress
listed below.
Phone: [phone]
E-mail: [e-mail]
Forwarding
Publication
Comments
We welcome comments about this publication. Please send comments
to the McDATA Solution Center by telephone, fax, or e-mail. The
numbers and e-mail address are listed above. Please identify the
manual, page numbers, and details.
Trademarks The following terms, indicated by a registered trademark symbol
(®) or trademark symbol (™) on first use in this publication, are
trademarks of McDATA Corporation or SANavigator, Inc. in the
United States or other countries or both:
Registered Trademarks Trademarks
McDATA®Sphereon™
Intrepid®Fibre Channel Director™
Fabricenter®SANavigator®HotCAT™
OPENready®OPENconnectors™
EFCM Basic Edition®EON™
SANtegrity®
All other trademarked terms, indicated by a registered trademark
symbol (®) or trademark symbol (™) on first use in this publication,
are trademarks of their respective owners in the United States or
other countries or both.
Laser Compliance
Statement Laser transceivers for the director are tested and certified in the
United States to conform to Title 21 of the Code of Federal
Regulations (CFR), Subchapter J, Parts 1040.10 and 1040.11 for Class 1
laser products. Elsewhere, the transceivers are tested and certified to
be compliant with International Electrotechnical Commission
IEC825-1 and European Norm EN60825-1 and EN60825-2 regulations
for Class 1 laser products. Class 1 laser products are not considered
hazardous. The transceivers are designed such that there is never
human access to laser radiation above a Class 1 level during normal
operation or prescribed maintenance conditions.