McGrathLocks MY-i MY-i-PTZ-4G-8WS User manual

1
MY-i–PTZ-4G-8WS

Specification
2
Camera: MY-i–PTZ-4G-8WS
• Solar panel universal adjustment, built-in super capacity battery
• Ultra-low power standby, quick wake up in 0.2 seconds
• PIR sensor + radar dual alarm detection
• High-performance ISP and 1/2.7" progressive sensor, blacklight full
color
• 1920*1080P HD video
• Built-in microphone and loudspeaker, support two-way audio
• Support Cloud storage and local storage
• APP support Android/IOS
• IP66 waterproof
• Support All-in-One installation and separated installation
General+A5:C33
Main
processor
HI
3518EV300
APP
Operation System
Android,
IOS
Image
Senor
1/
2.7″Image Sensor
Compression
H
.264+/H.265
Resolution
1920
*1080 1080P
Internet Connection
4G
TD
-LTE,TD-LTE / LTE FDD TD-LTE / LTE-FDD
Alarm
Detection
Mode
PIR
+ Radar dual detection
Detection
Distance
0~
12M
Detect
Angle
95
°
Alarm
PIR
sensor + radar dual alarm
PTZ
PTZ
Angle
Horizontal
355 °Vertica 100°
Speed
Horizontal
55 °/S Vertical 40°/S
Night Vision
Full
color night vision
0.
00001 Lux
IR
LED
infrared
LED 30MIR distance
White
light LED
white
light LED 30M distance
Audio
Built
-in speaker (input)
3W
Built
-in microphone (output)
voice
monitoring distance 20M
Lens
Lens
3.
6mm
Lens
Angle
95
°
Storage
Cloud
Storage
storage
when alarm recording
Local
Storage
TF
Card Max 128G
Power
Power
Supply Mode
Solar
Panel+ Build in Batteries
Solar
Energy Power
8W
Battery
Capacity
Support
6pcs 18650 batteries（6*3000MA=18000MA）
Operating power consumption
4W
Standby
consumption
0.
003W
Others
Working
Environment
Indoor/outdoor
Operation
Temperature
-30
°~+60°
Humidity
0%
~90%RH
Package
N.W.
1.9KG/PC
Giftbox size
287*201*172 mm
Quantity in carton
6pcs
G.W.
12KG/CTN
Carton size
615*300*360mm
MY-i–PTZ-4G-8WS

3
MY-i–PTZ-4G-8WS
Product Diagram
1.3 Process
1. Solar panel: connect panel to camera, fix a suitable angle with screws
2. Sim and TF card: loosening the cap in above remark
3. insert SIM card and TF card , then tightening the screws.. Power cable:
connect the
cables between the panel and camera, then tightening the waterproof cap.
4. Panel power-on: Remove the rubber of panel, make sure it is
power on. Then put the rubber back to the panel.

4
MY-i–PTZ-4G-8WS
Installation APP Installation
Scan the following QR codes or search for〝UBox〞from the App
Store(for iOS devices) or Google Play Store (for Android smartphones)
to download and install the app.
APP Registration
Open the app then input your E-mail address then press 'Register’.
Check and select to agree the agreement then your E-mail box will get an
verification code.( For better user's experience, please allow to open all
permissions to avoid missing any notifications from the app.)
Input the “Verification code "and press 'Next'.（if you not found
the mail you might find the code in your email spam box. ）

5
MY-i–PTZ-4G-8WS
APP Registration
•Open the app then input your E-mail address then press 'Register’. Check and select to
agree the agreement then your E-mail box will get a verification code.( For better user's
experience, please allow to open all permissions to avoid missing any notifications from the
app.)
• Input the “Verification code "and press 'Next'.（if you not found the mail you might find the
code in your email spam box.
•Set the login password and confirm the login password. Then press 'Register' to next
step.(For your password safety, the password requires more than 8 characters plus a
combination of letters)
•Enter your E-mail address and input your login password. Then press 'Login'.
WI-FI Connection
•Press 'Add Family' then set the room or position as per reminders.
•Enter your family name and then press 'Next'.
•Input the necessary information just like Country, Province, then press 'Done'.
•Press 'Add a device' to add a smart device
Australia
Queensland

6
MY-i–PTZ-4G-8WS
WI-FI Connection
•Insert the SIM card into device then put the battery into the device and some of the models
need to install the antenna.
•After the power on the device, wait for 1-3 minutes as the device blue LED light s up then
press next.
•If the device blue LED dose not light up, please check below config notes.
•Find the UID QR code on device, Then use APP scan the QR code.
•App are search device on the internet may take 30-120 seconds.
•Select the name and the device location then press done.
•The device will entre to the device list automatically. Setup success! The device is now
ready to use.

7
MY-i–PTZ-4G-8WS
Device Settings

8
MY-i–PTZ-4G-8WS