mCig 4.0 User manual

mCig®4.0 USER MANUAL

4 PACKING CONTENTS:
5 mCIG® PEN OVERVIEW
7 LOADING
8 USING
10 CHARGING
13 CLEANING
15 TIPS
16 WARNINGS
17 WARRANTY
13 IMPORTANT SAFETY NOTICE AND
DISCLAIMER
CONTENTS

4
PACKING CONTENTS:
1 mCig® 4.0 Pen Vaporizer
1 Cleaning Brush Tool
1 Packing Tool
1 USB Charging Cable
1 User Manual

5
mCIG® 4.0 PEN OVERVIEW
1. Mouthpiece
2. Heating Chamber
3. Power Button
4. Rechargeable Battery
5. Indicator Light
6. Charging Indicator
7. Micro USB Interface

6
mCIG® 4.0 PEN OVERVIEW

7
LOADING
To load your mCig® 4.0 Pen Vaporizer follow these steps:
1. Remove mouthpiece by pulling it away from pen.
2. Fill the heating chamber with .15g-.2g ground dry herb.
3. Use the packing tool to evenly and gently pack the chamber.
4. Push the mouthpiece back onto the pen.

8
USING
To unlock and power up the mCig® 4.0 Vaporizer Pen, rapidly press the button 3 times. Indicator light will be solid red until
temperature reaches 180˚C (356˚F). Once optimal temperature is reached, light will turn green. The mCig® 4.0 heats up in
40-50 seconds. Gently inhale, exhale, welcome to the mCig® 4.0!
Feel free to hit the mCig® 4.0 Vaporizer Pen as it heats up for some great avors. Temperature will keep between 195˚C and
225˚C after the indicator light turns green. After 4 minutes the mCig® 4.0 Vaporizer Pen will automatically shut off. Press
the button 3 times rapidly to power up again.

9
USING

10
CHARGING: FIRST USE
We recommend charging the mCig® 4.0 Vaporizer Pen battery for at least 6 hours on the rst charge.
This will condition the battery for optimal capacity.
The charging indicator stays red while the device is charging. The red indicator light will no longer be illuminat-
ed when the battery is full.