STORZ & BICKEL Volcano Hybrid Instruction manual

7. Inhale.
6. Pull Valve Balloon tight.
7. Put Valve Balloon on
Filling Chamber.
10. Turn off air pump. 13. Inhale.
12. Attach Mouthpiece to
Valve Balloon.
Do not overll!
6.
7.
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap.
6. Put Tube on Filling Chamber.
This QUICK START MANUAL will guide you through the
main steps on how to use your new VOLCANO HYBRID
with the Tube or the Valve Balloon. For detailed
directions always refer to the included Instructions for
Use or contact us at [email protected].
Please clean the Mouthpieces before use.
BALLOON
TUBE
QUICK START MANUAL
1. Fill Filling Chamber with
ground substance and screw
on Filling Chamber Cap.
2. Screw on Filling Chamber.
3. Switch heat on.
4.Choose temperature.
5. Wait until set value is equal
to actual value (short acoustic
signal of the air pump).
Do not overll!
2. Screw on Filling Chamber.
3. Switch heat on.
4.Choose temperature.
5. Wait until set value is equal
to actual value (short acoustic
signal of the air pump).
9. Observe vapor density.
ok
8. Switch Air Pump on.
11. Remove full Balloon Unit.
3.
2.
2.
3.
2.
2.

QUICK START MANUAL
SN
Control your HYBRID via App
Save serial numbers
Adjust auto-shutoff
Personalize settings
Create workows
STORZ & BICKEL APP
Compatible with Android 6.0 and above
For more information visit www.storz-bickel.com
Get rmware updates
180 C
15 min
Workows Iterations
Temperature Settings VOLCANO Information
STORZ & BICKEL GmbH · In Grubenäcker 5-9 · 78532 Tuttlingen · Germany · © by STORZ & BICKEL GmbH · VHAL-30-092 12-2021 · Subject to alterations · All rights reserved