MDA DESIGNS CURVE 1000 User manual

1 PERSON ASSEMBLY
DESCRIPTION:
CURVE 1000 MEDIA UNIT
1.0 hr
2.0M X2.0M
ASSEMBLED DIMENSIONS
1000mm
FLOOR AREA
REQUIRED ASSEMBLY SPACE
APPROXIMATE ASSEMBLY TIME
340mm
460mm
MDACURVE1000AI002 ISSUE A 120712

DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
PARTS LIST
no. PART LIST QTY
(1) BASE PANEL
(2) FOOT
(3) LEFT HAND SIDE PANEL
(4) RIGHT HAND SIDE PANEL
(5) CENTRE PANEL
(6) TOP PANEL
(7) REAR COVER PANEL
1
4
1
1
1
1
1
(8) FRONT DOOR ASSEMBLY
1
(9) GLASS TOP PANEL
1
(10) GLASS SHELF
1
1
2
3
4
5
6
7
8
9
10
1

DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
HARDWARE LIST
4x
M6 x 30mm
A
BOLT
12x
M6 x 38mm
B
CAM PIN
8x
M3.5 x 14mm
C
SCREW
8x
M3 x 14mm
E
SCREW
1cm
0cm
2cm
3cm
4cm
5cm
6cm
4x
M3 x 10mm
D
SCREW
3x
M4 x 10mm
F
SCREW
1x
M4 x 65mm
G
4mm ALLEN
KEY
12x
12 x 10mm
H
CAM LOCK
2x
25 x 40mm
I
MAG CATCH
2x
15 x 40mm
J
MAG CATCH PLATE
4x
15 x 40mm
K
SHELF PEG
1x
120 x 40mm
L
DOOR STAY
2

DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each
step of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people ( as
indicated on page 1) to assemble your product safely
4. We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we
recommend that the product is placed on a protected surface during assembly to
prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may
damage the product.
Care and Maintenance of your Furniture
•If the glass is chipped or broken, stop using the product and consult the
manufacturer or supplier.
•Please do not place very hot or very cold items on the glass surface, unless
adequately thick table mats are used to prevent such items from coming into
contact with the glass.
•Please do not use the glass as a chopping surface. Do not strike the glass with
hard or pointed items.
•When cleaning glass panels use a damp cloth or leather with washing up liquid or
soft soap if necessary, do not use washing powders or any other substances
containing abrasives since these substances scratch glass.
•The glass used in this product is toughened and complies with BS EN 12150-
1:2000, clauses 8.3 & 8.4
•Please periodically check all fittings and re-tighten as necessary.
•Please do not sit or stand on this item.
Never allow any kind of liquid to remain on your furniture, Absorption can cause
wood to warp or finishes to de-laminate
•Please do not drag and pull your furniture.
•
3

STEP 1
DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
4x
A
1
STEP 2
6x
B
1
4

STEP 3
DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
STEP 4
6x
H
H
X6
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
3
5
4
6x
B
4x
C
2x
I
6
ENSURE THESE
HOLES ARE IN
CORRECT POSITION
5

STEP 5
DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
STEP 6
8x
E
6x
H
CORRECT WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
H
X6
6
6
7

STEP 7
DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
STEP 8
4x
K
2x
C
1x
L
4x
D
2x
J
8
7

STEP 9
DESCRIPTION:
CURVE 1000 MEDIA UNIT
CURVE
STEP 10
DOOR PANEL
FLAT BLADE
SCREWDRIVER
(SUPPLIED)
2x
C
3x
F
2x
C
THE ACTION OF THE DOOR DAMPER CAN
BE ADJUSTED WITH THE ALLEN KEY SUPPLIED.
TURN CLOCKWISE TO INCREASE TENSION
10
9
3x
F
8