JSI SWISH Casegood Desk User manual

Installation Instructions
Casegood Desk
Recommended Tools
Hardware Used
Step 1
Level Pedestals
• Position pedestals in desired location.
• Level all pedestals front-to-back
and side-to-side by rotating
adjustable glides.
• Pedestals that share same
worksurface are to be
adjusted to same height.
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546 Form No. INST-10006
Step 2
Attach Z-Bars & Top Spacers
To Worksurface
• #14 x 1”Pan Head Wood Screw,
2 per z-bar
• #8 x 5/8”Pan Head Wood Screw,
2 per top spacer
• #14 x 1”Pan Head
Wood Screws
Page 1 of 2
#3 Phillips Head

Installation Instructions
jsifurniture.com
800.457.4511
812.482.3204 O
812.482.1548 F
225 Clay Street / PO Box 231
Jasper, Indiana 47546 Form No. INST-10006
Step 4
Attach Plentums
• Snap fit plentums into place using factory
installed clips.
Page 2 of 2
Casegood Desk
(continued)
Step 3
Attach Worksurface to Pedestals
• Insert wooden dowels into pedestals.
• Carefully lower worksurface onto pedestals,
inserting dowels into proper z-bar holes.
• Remove top drawers and secure worksurface
to pedestals using fastening knobs.
Plentum
Clips