fantastic furniture Havana D4 User manual

Version 1.0
Havana
Table D4
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
Recommended weight capacity : 50kg.

Page 3
Read through the instructions carefully
before you begin.
Assembly Checklist
Identify and lay out all of the
components before you begin assembly.
Unless instructed, do not fully tighten
screws until the item is fully assembled.
! Never use power tools unless specifically instructed. They can damage your
components or hardware if used incorrectly.
! The most common mistakes made during assembly are using the wrong hardware or
getting components back to front.
! Always use a soft surface (such as carpet or cardboard) when assembling your
product to avoid scratching or damaging the surface of the product.
! Bulky items such as wardrobes and bunk beds should be assembled in the room they
will be used in as they may not fit through a door once assembled.
! Never use any glue until you are certain that the parts belong together.
! Periodically check and re-tighten all fasteners. Check the product care label or
website for product care instructions.
! If you are having any diculties assembling your product, missing any hardware or
components please visit our website Help Centre for further assistance.
! Please see page 2 for any safety requirements or weight restrictions.
Make sure you have all the required tools.
Never use power tools unless instructed.
Useful Information
fantasticfurniture.com.au

16 x Cam Bolts
(H3)
16 x Dowels
(H1)
16 x Cam Nuts
(H4)
4 x Bracket
(H2)
4 x Plastic
Glide (H9)
8 x Screws
(H10)
Parts list
Top Panel (P1)
Legs (P2) x2
Legs (P3) x2
Rail (P4) x2
Rail (P5) x2
Hardware pack
Top Panel
(P1)
Leg
(P2)
Leg
(P2)
Rail
(P4)
Rail
(P4)
Rail
(P5)
Rail
(P5)
Leg
(P3)
Leg
(P3)
8 x Half Round
Nuts
(H5)
8 x Threaded
Rod (H6)
1 x Spanner
(H8)
8 x Hexagonal
Nuts
(H7)
What you need
to assemble the product
Other tools you need:
Phillips Head Screwdriver;
Hammer
DO NOT USE
fantasticfurniture.com.au Page 4

You will need
Step 1
Step 2
Attach 4 x Threaded Rod (H6) into Legs (P2x2, P3x2).
Insert 8 x Dowels (H1) into Rails (P4x2). Attach Legs (P2x2, P3x2) to Rail (P4x2)
with 4 x Half Round Nuts (H5), and 4 x Hexagonal Nuts (H7) using Spanner (H8).
You will need
8 x Threaded
Rod (H6)
(P2)
(P3)
(P4)
(P3)
(P2)
8 x Dowels
(H1)
4 x Hexagonal
Nuts (H7)
4 x Half Round
Nuts (H5)
1 x Spanner
(H8)
x2
x2
H6
H6
H6
H6
H1
H1
H7
H5
H8
fantasticfurniture.com.au Page 5

Step 3
You will need
You will need
Step 4
Secure 16 x Cam Bolts (H3) to Top Panel (P1) by tightening Cam Bolts (H3) with a
Phillips Head Screwdriver.
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into Rail (P5x2), attach to Legs (P2x2, P3x2). Insert 4 x
Half Round Nuts (H5), and 4 x Hexagonal Nuts (H7) using Spanner (H8).
8 x Dowels
(H1)
(P2)
(P2)
(P3)
(P3)
(P5)
(P5)
16 x Cam Bolts
(H3)
(P1)
4 x Hexagonal
Nuts (H7)
4 x Half Round
Nuts (H5)
1 x Spanner
(H8)
H1
H1
H1
H3
H1
H8
H8
fantasticfurniture.com.au Page 6

Attach 4 x Bracket (H2) to Rails (P5x2) and Legs and secure with 8 x Screws (H10)
by tightening with a Phillips Head Screwdriver.
Step 5
You will need
Phillips Head
Screwdriver
16 x Cam Nuts
(H4)
You will need
Phillips Head
Screwdriver
8 x Screws
(H10)
Attach Rails (P5x2) and (P4x2)
to Top Panel (P1). Insert 16 x
Cam Nuts (H4) into Rails (P5x2),
Rails (P4x2), Legs (P3x2) and
(P4x2) secure by tightening Cam Nuts
(H4) with a Phillips Head Screwdriver.
(P3)
(P2)
(P2)
(P3)
(P5)
(P5)
(P4)
(P4)
(P1)
(P4)
(P5)
(P5)
(P4)
4 x Bracket
(H2)
(P1)
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Required
Two People
Step 6
H4
H2
H10
H2
H10
fantasticfurniture.com.au Page 7

Step 7
You will need
Attach 4 x Plastic Glides (H9) to the Legs (P2x2&P3x2) by using a
hammer to gently tap into place.
4 x Plastic
Glide (H9) Hammer
Required
Two People
(P2) (P2)
(P3)
(P3)
H9
H9
H9
H9
fantasticfurniture.com.au Page 8
Job Complete!
In the interest of our environment please dispose of all packaging thoughtfully.