Cooper Lighting Fail-Safe RC User manual

FAIL-SAFE®
ARCHITECTURAL VANDAL RESISTANT
COOPER LIGHTING
VariColor
™
SPEC ANY COLOR
C
D
A
DIMENSIONS DESCRIPTION
The Fail-Safe VR 2000 Linear
Series combines strength-
gaining architecture with
energy-saving technology.
Architecturally angled facets
with radius corners actually
increase the ability of the lens to
deflect blows and absorb
impact. Extra thick injection
molded polycarbonate lens
incorporates optical design
that obscures the lamp image
and spreads light evenly.
Perimeter paint (optional) is
available in 4 standard colors.
Choose VariColor™ to customize
your product with your
corporation or school colors. An
emergency battery pack is
available as an option. U.L. listed
and C.S.A. certified for
wet locations. VR Products carry
aLifetime Warranty. For full
information, see warranty
statement at the end of this
section.
RC
RW
LINEAR
FLUORESCENT
32W-80W
Fluorescent
POLYCARBONATE LINEAR
FLUORESCENT LUMINAIRE
CLEAR PRISMATIC OR
WHITE
ORDERING INFORMATION
SAMPLE NUMBER: FLRC-80A-120V
ABC
10 11/16" 3 1/2" 53 3/16"
(272mm) (89mm) (1351mm)
A
B
C
Lamp Type
FL=T12
Fluorescent
FS=T8
Fluorescent
TT=Twin Tube
Fluorescent
Product Family
Linear Series
RC=Clear Prismatic
Polycarbonate
Lens
RW=White
Polycarbonate
Lens
Wattage
64=(2)32W
80=(2)40W
160=(4)40W
T5
56=(2) 28W
Ballast
H=High Power
Factor
A=Electronic
Paint Configuration
PP=Perimeter Paint
(Optional; Black is
standard)
Voltage
120V
277V
Accessories
(Order Separately)
VRSD=V-R Screwdriver
for all Lens Screws
VRSB=V-R Screwdriver
Bit
for all Lens Screws
RMK-RC=Row Mount
Kit
• New AccUView coating for
the one piece injection
molded polycarbonate
lens. AccUView is a UV
inhibitor coating inside and
out to lengthen lens life.
Minimum .130" thick with
internal blondels
• Six stainless steel TORX®
screws with center reject
pin. Screw heads are
recessed
• 16 ga. CRS reflector with
white polyester powder
coat finish
• Lamps by others
• Pressure lock lampholders
• Gasketing is one piece die
cut closed cell and seals
lens and housing
• Standard CBM/ETL Class P
certified ballast. Ballast
securely attached to
housing with mounting
bolts. Wireway cover easily
removed without tools
Options
F1=Single Fused
EBP=Emergency
Battery Pack
LT=Zero Degree
Starting
Ballast
Color
Blank=Black
(Standard)
WHT=White
DBZ=Bronze
AP=Gray
ORDERING MATRIX
Notes: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without
notice. Products also available in non-US voltages and 50Hz for international markets.
1. Not compatible with EBP. 2. Low temp is standard with electronic ballast. 3. Only available as HPF. * - Does not apply when using
electronic ballast. 1429