MDI D2 User manual

User Manual

defective

4
02 DMD FEATURE
Display Technology: DLP(0.3" 720P DMD)
Market brightness:
500 Lumens Lx@1M
Brightness: REAL 200 ANSI Lumens
Focal length: 60mm
Projection Size: 5.5"~200"(1M~7M)
Uniformity: >85％
Resolution: 1280*720 (support 1080p video)
Light Source & Lifespan: OSRAM
LED(R.GB) Q8 (Up to 30,000 hours)
Contrast ratio (FIFO): 〈3000:1
Distortion: <1.0％
Throw Ratio: 1.6：1(distance/width)
Focusing: Motor Focus by remote control
OS FEATURE (ANDRIOD)
Built-in Battery: 4000mAh
Power Consumption:36W
Built-in Speaker:2*2W
Input Voltage: DC 12V/3A; AC100V~240V
Dimension(L*W*H):
175mm*102mm*28mm
Weight: 445g
Music Format: WMA, AAC
Video Format: RM,RMVB,MKV,WMV,VOB
Picture Format: JPEG, BMP, PNG
Display Shareing：Airplay/Miracast
OS: Android 4.4.2
Flash: 8GB
WIFI: 2.4G
GPU & CPU:Quad-Core & Quad-Core
RAM: 1GB DDR3
Bluetooth: 4.0
Offset: 100%
BASIC FEATURE
Ports: HD/AV//USB*2/Micro SD card(TF)/
Audio Out/DC in
Accessories: Remote control, Adapter,
Tripod, User Manual
Projector Features

Accessories Description
Adapter
Tripod
Please unpack and check all of the following items carefully. If anything is missing,
please contact your dealer.
Remote Control
FOCUS
+
-
-
User Manual
User Manual
Projector
AUD IO OUT US B1 USB 2
DC IN
mic roSD
A B CD EF GH
Back View
A
B
C
E
D
F
G
H
Audio out portAudio out
Updates V69 software and reads external
device
Updates Android system and reads external
device
USB1
USB2
HD port High definition multimedia interface, audio input
port, connect to PC/iPad
Remoto control Receiving remote control signal
TF card port Connect to TF card, Micro SD storage device
Power input port
DC
Turn on/off Can turn on/ off the projector when you
press the key
AC cable
HDM I
03

FOCUS
Confirm
Left Right
Turn on/off
Up
Down
Focus+
Focus-
Volume+
Volume-
Return
HDMI/AV
Parameters can be adjustable
Menu Recommend Option
Contrast
Brightness
Color
Sharpness
55
60
55
60
Aspect Ratio
Rotate
16:9 4:3/16:9/zoom*1/zoom*2
Front /Rear /Ceiling projection
Keystone
Front projection
AUTO Auto/Manual
Restore Factory
De.. Yes/No
0~100
0~100
0~100
0~100
SETTINGS
OSD Language English
Sound Mode
Color Temperature
Aspect Ratio
Rotate
Keystone
Software Update(U..
Restore Factory De..
Device Info
Picture Mode
1. Switch on the power button for 3~5 seconds, the projector will turn on and lights will be on.
Main menu appears after boot logo. Press the FOCUS "+", "-" on the remote control to adjust
visual clarity.
04

Remote control &external connecting devices
There are many different ways to choose signal output of the external devices,
depending on PC manufacturer. Please refer the tablet below for more details.
Manufacturer
Acer
Dell
EPSON
Fujitsu
Hp
IBM
Lenovo
NEC
Panasonic
SHARP
SONY
SOTEC
Toshiba
Key
n+F5F
Fn+F8
Fn+F8
Fn+F10
Fn+F4
Fn+F7
Fn+F3/F7
Fn+F3
Fn+F3
Fn+F5
Fn+F7
Fn+F3/F5
Fn+F5
!Caution
The shortcuts on the tablets was
updated by August 2013,please
check the computer user manual
for reference,and subject to
actural shortcuts.
1
3
2. Connect to the Internet or Input signal source
1
2
Click “Setting” on the home page, as below.
Enter “ setting”; select WLAN under
“Wireless and networks”
Click WLAN; search the wireless signal and
choose to connect, and enter password.
4 This device supports AV, HDMI, VGA signal
sources input, remote control and touch panel
keys.
Bluetooth Setting: If you need to set up
Bluetooth function, you should find the
setting of it in:
Settings-Bluetooth, then select the
“Bluetooth searching” and connect it to the
device which you need. This projector
supports Bluetooth speaker, Bluetooth
fingers and other external devices.
2Language&Input:
Settings- -Language&Input;
this projector supports
general
Multiple Language.
3Reset to defaults: When the device appears
software fault or abnormal use, you can reset
it to defaults. Detailed setting method:
Settings- -Backup&Reset.general
2). Other Settings
1). Other Settings

Please make sure whether your phone can support Mirroring function.
(Most of the smartphones on the market can support it) Turn on the
projector and connect it to the WIFI. Ensure your Android phone is
connected to the same WIFI network.
1) Turn on projector, start Miracast, as shown in figure below:
2) You'll need to go to the Settings menu of your Android phone, tap
Display, and then tap Multi-screen.
3) At the top of this page, toggle “Multi-screen” to ON and it will
scan for the nearby Miracast devices. After a minute, the name of
projector should pop up. You'll be prompted for the PIN code display
on projector. After you connect the projector to your mobile phone,
your mobile phone's screen will be mirrored onto the projection
display.
In addition, If your phone don't support Multi-screen, you can download
"Happy Cast Mirroring" APP in APP Store. Android 5.0 or greater can
support mirroring natively, below Android 5.0 supports streaming.
More multi-screen mirroring interactive function, looking forward your
further explored.
2. Android Phone Screen Mirroring
3. Multi-screen Mirroring interactive Function
Turn on the projector and connect it to the WIFI. Ensure your iPhone
is connected to the same WIFI network.
1. Iphone Screen Mirroring
1) Enter Screen Share
2) Choose the Airplay option on your iPhone.
3) Choose device name, and toggle “Mirroring” ON; tap “Done”, then you
can stream music, photos, and videos etc. to your projector.

AV AV input source with Red/yellow/blue audio cable,
such as DVD Player
AV Interface
05 06