Meanwell ELG-200 Series User manual

■ 
■ 
■  ■ 
File Name:ELG-200-SPEC 2022-03-16
144~200W Constant Voltage + Constant Current LED Driver
ELG-200 series
‧
‧
‧
‧
‧




℃℃


    





‧
‧
‧
‧
‧
‧

‧
‧


A








 




Dx







 
 IP67
IP65


8




 
{
IS 15885(Part 2/Sec13)
R-41027766
THOMAS SAMUEL
THOMAS SAMUEL
  
 
Note.13
User’s Manual


■ 

SPECIFICATION
MODEL
OUTPUT
VOLTAGE RANGE Note.5
FREQUENCY RANGE
POWER FACTOR
EFFICIENCY (Typ.)
AC CURRENT
INPUT
INRUSH CURRENT(Typ.)
LEAKAGE CURRENT
EMC IMMUNITY
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVER TEMPERATURE
OVER VOLTAGE
500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
10ms/ 230VAC 10ms/ 115VAC
47 ~ 63Hz
1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC
<0.75mA / 277VAC
Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧50%) ;BS EN/ EN61000-3-3;GB17625.1,GB17743;
EAC TP TC 020; KC KN15,KN61547
20 ~ 95% RH non-condensing
-40 ~ +90℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
ENVIRONMENT
EMC EMISSION
SAFETY &
EMC
PROTECTION
Shut down output voltage, re-power on to recover
Shut down output voltage, re-power on to recover
SHORT CIRCUIT
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
TOTAL HARMONIC DISTORTION
DC VOLTAGE
RATED CURRENT
RATED POWER
VOLTAGE ADJ. RANGE
CURRENT ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME Note.6
HOLD UP TIME (Typ.)
RIPPLE & NOISE (max.) Note.3
VOLTAGE TOLERANCE Note.4
CONSTANT CURRENT REGION Note.2
OVER CURRENT
Adjustable for A/AB-Type only (via built-in potentiometer)
Adjustable for A/AB-Type only (via built-in potentiometer)
COLD START 60A(twidth=510 s measured at 50% Ipeak) at 230VACμ; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
MAX. CASE TEMP. Tcase=+90℃
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV,
Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547
(Please refer to "STATIC CHARACTERISTIC" section)
100 ~ 305VAC 142 ~ 431VDC
℃





       .


℃

℃℃





※ Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
144~200W Constant Voltage + Constant Current LED Driver
95 ~ 108%
Hiccup mode, recovers automatically after fault condition is removed
Constant current limiting, recovers automatically after fault condition is removed
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
No load power consumption <0.5W for Blank / A / Dx / D-Type
NO LOAD / STANDBY
POWER CONSUMPTION Note.7
Standby power consumption <0.5W for B / AB / DA-Type
Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
ELG-200-54
ELG-200-48
ELG-200-36
ELG-200-12 ELG-200-42
54V
48V
36V
12V 42V
16A 4.76A
5.55A 4.16A
350mVp-p
27 ~ 54V
200.88W
3.72A
250mVp-p
24 ~ 48V
199.68W
250mVp-p
18 ~ 36V
199.8W
150mVp-p
6 ~ 12V
192W
250mVp-p
21 ~ 42V
199.9W
11.2 ~ 12.8V 33.5 ~ 38.5V 39 ~ 45V 44.8 ~ 51.2V 50 ~ 57V
1.86 ~ 3.72A
2.08 ~ 4.16A
2.78 ~ 5.55A
8 ~ 16A 2.38 ~ 4.76A
±3.0%
±0.5%
±2.0%
±2.0%
±0.5%
±0.5%
±2.0%
±0.5%
±0.5%
±2.0%
±0.5%
±0.5%
±2.0%
±0.5%
±0.5%
93%
93%
92%
90% 92.5%
60 ~ 67V
54 ~ 63V
42 ~ 49V
13.5 ~ 18V 47 ~ 54V
244*71*37.5mm (L*W*H)
1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
ELG-200-24
24V
8.4A
200mVp-p
12 ~ 24V
201.6W
4.2 ~ 8.4A
±2.0%
±0.5%
±0.5%
92%
27 ~ 34V
22.4 ~ 25.6V
SAFETY STANDARDS
UL8750(type”HL”), CSA C22.2 No. 250.13-12; independent, IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13
BS EN/EN62384; EAC TP TC 004;BISIS15885(for 12/12A/12B/12DA/24/24A/24B/24DA/36/36A/36B/42A/42B/48/48A/48B/54A/54B
; GB19510.14,GB19510.1; IP65 or IP67; approvedonly) KC61347-1,KC61347-2-13
Compliance to IEC62386-101,102,(207 by request) for DA Type only
DALI STANDARDS
2391.4K hrs min. Telcordia SR-332 (Bellcore) ;204.9K hrs min. MIL-HDBK-217F (25℃)
ELG-200 series
150W
144W 149.94W
149.76W 149.76W 150.12W
200VAC ~ 305VAC
100VAC ~ 180VAC
File Name:ELG-200-SPEC 2022-03-16

Block Diagram
PFC fosc : 50~120KHz
PWM fosc : 60~130KHz
144~200W Constant Voltage + Constant Current LED Driver
※ This series is able to work in either Constant Current mode (a direct drive way) or
Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.
DRIVING METHODS OF LED MODULE
Typical output current normalized by rated current (%)
In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.
Should there be any compatibility issues, please contact MEAN WELL.
100
50
(min.)
Vo(%)
50 100 Io(%)
(B)
Constant
Current area
(C)
Hiccup
Protection
(A)
Constant
Voltage area
DETECTION
PWM & PFC CIRCUIT
EMI FILTER
RECTIFIERS
POWER
SWITCHING
FILTER
&
RECTIFIERS Vo+
Vo-
I/P
CONTROL
O.V.P.
&
O.L.P.
PFC
CIRCUIT
O.L.P.O.T.P.O.T.P.
PFC CONTROL
ELG-200 series
CASE :Protective Earth
File Name:ELG-200-SPEC 2022-03-16

DIMMING OPERATION
ELG-200
◎ Applying additive 0 ~ 10VDC
◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):
◎ Applying additive resistance:
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.
Vo+
Vo-
DIM+
DIM-
++
+
--
-
“DO NOT connect "DIM- to Vo-"
Additive Voltage
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive PWM signal
Vo+
Vo-
DIM+
DIM-
++
--
“DO NOT connect "DIM- to Vo-"
Additive Resistance
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
10%
0%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Output current (%)
Dimming input: Additive voltage
Duty cycle of additive 10V PWM signal dimming input
144~200W Constant Voltage + Constant Current LED Driver
※ 3 in 1 dimming function (for B/AB-Type)
‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance.
‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
‧Dimming source current from power supply: 100 A (typ.)μ
Short
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity forsynchronizeddimmingoperation)
Dimming input: Additive resistance
* DIM+ for B/AB-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B/AB-Type
DA- for DA-Type
PROG- for D2-Type
ACL(Brown)
ACN(Blue) Vo+(Red)
Vo-(Black)
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16
DIM-(Pink)**
DIM+(Purple)*

※ DALI Interface (primary side; for DA-Type)
‧Apply DALI signal between DA+ and DA-.
‧DALI protocol comprises 16 groups and 64 addresses.
‧First step is fixed at 8% of output.
※ Smart timer dimming function (for Dxx-Type by User definition)
MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.
Ex : ◎ D01-Type: the profile recommended for residential lighting
Ex: ◎ D02-Type: the profile recommended for street lighting
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
Set up for D01-Type in Smart timer dimming software program:
Set up for D02-Type in Smart timer dimming software program:
TIME**
TIME**
06:00
01:00
T1
T1
T2
T2
T3
T3
T4
T4 T5
07:00
03:00
11:00
8:00 11:00
---
---
LEVEL**
LEVEL**
100% 70%
80%50%
50%
100%
70%
60% 80%
Dimming Level(%)
Operating Time(HH:MM)
Dimming Level(%)
Operating Time(HH:MM)
144~200W Constant Voltage + Constant Current LED Driver
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16

Ex: ◎ D03-Type: the profile recommended for tunnel lighting
Set up for D03-Type in Smart timer dimming software program:
TIME** 01:30
T1 T2 T3
11:00 ---
LEVEL** 70% 100% 70%
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.
Dimming Level(%)
Operating Time(HH:MM)
144~200W Constant Voltage + Constant Current LED Driver
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16

80
82
84
86
88
90
92
94
96
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
277V(200W)
230V(200W)
115V(150W)
0.84
0.86
0.88
0.9
0.92
0.94
0.96
0.98
1
50% 60% 70% 80% 90% 100%
277V(200W)
230V(200W)
115V(150W)
PF
LOAD
100 120 140 160 180 200 240 250 260 270 280 305
100
90
80
70
60
50
40
OUTPUT LOAD vs TEMPERATURE(Note.10)
STATIC CHARACTERISTIC
TOTAL HARMONIC DISTORTION (THD)
AMBIENT TEMPERATURE,Ta ( )℃
LOAD (%)
INPUT VOLTAGE (V) 60Hz
LOAD (%)
(HORIZONTAL)
POWER FACTOR (PF) CHARACTERISTIC
Tcase ( )℃
LOAD (%)
(HORIZONTAL)
※De-rating is needed under low input voltage.
EFFICIENCY vs LOAD
ELG-200 series possess superior working efficiency that up to 93% can
be reached in field applications.
-40 -25 0 20 45 55 65 75 90
20
40
60
80
100
※48V Model, Tcase at 80℃
※48V Model, Tcase at 80℃
EFFICIENCY(%)
THD
LOAD
※Tcase at 80℃
144~200W Constant Voltage + Constant Current LED Driver
Constant Current Mode
230VAC
input only
-40 -25 100 20305060 70
20
40
60
80
100
LOAD
75
12V
others
230VAC
input only
◎If ELG-200 operates in Constant Current mode with the
rated current, the maximum workable Ta is 50 for℃
12V-model whereas 60 for other models.℃
110VAC110VAC
ELG-200 series
4%
6%
8%
10%
12%
14%
16%
18%
50% 60% 70% 80% 90% 100%
277V(200W)
230V(200W)
115V(150W)
File Name:ELG-200-SPEC 2022-03-16

0
20
40
60
80
100
120
20 30 40 50 60 70 80 90
144~200W Constant Voltage + Constant Current LED Driver
LIFETIME
Tcas e( )
℃
LIFETIME(Kh)
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16

CASE NO.: 262A Unit:mm
tc
※ Blank-Type (for 12V model)
‧ : Max. Case Temperature
tc
144~200W Constant Voltage + Constant Current LED Driver
300±20
300±20
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
ACL(Brown)
ACN(Blue) 90
32
233
244
220
53.8
71
37.5
37
4-ψ4.5
SJTW 14AWGx2C
2
&H05RN-F 1.0mm
MECHANICAL SPECIFICATION
tc
※ Blank-Type (for other models)
‧ : Max. Case Temperature
tc
300±20
300±20
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
ACL(Brown)
ACN(Blue) 90
32
SJOW 17AWGx2C
233
244
220
53.8
71
37.5
37
4-ψ4.5
2
&H05RN-F 1.0mm
2
&05RN-F 1.0mm
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16

tc
‧ : Max. Case Temperature
tc
144~200W Constant Voltage + Constant Current LED Driver
37.5
37
38.5
21.01
14.5
300±20
300±20
ACL(Brown)
ACN(Blue) 90
32
233
244
220
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
tc
‧ : Max. Case Temperature
tc
37.5
37
38.5
21.01
14.5
300±20
300±20
ACL(Brown)
ACN(Blue) 90
32
233
244
220
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
2
&05RN-F 1.0mm
※ A-Type (for 12V model)
※ A-Type (for other models)
Vo+(Red)
Vo-(Black)
SJTW 14AWGx2C
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16

tc
‧ : Max. Case Temperature
tc
※ AB-Type (for 12V model)
233
244
220 300±20
300±20
37.5
37
ACL(Brown)
ACN(Blue) 90
32
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJTW 14AWGx2C
Vo+(Red)
Vo-(Black)
tc
‧ : Max. Case Temperature
tc
※ AB-Type (for other models)
233
244
220 300±20
300±20
37.5
37
ACL(Brown)
ACN(Blue) 90
32
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
2
&05RN-F 1.0mm
UL2517 20AWGx2C
UL2517 20AWGx2C
38.5
21.01
14.5
38.5
21.01
14.5
144~200W Constant Voltage + Constant Current LED Driver
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16
DIM-(Pink)**
DIM+(Purple)*
DIM-(Pink)**
DIM+(Purple)*

tc
‧ : Max. Case Temperature
tc
※ B/DA/D2-Type (for 12V model)
144~200W Constant Voltage + Constant Current LED Driver
* DIM+ for B-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
233
244
220 300±20
300±20
37.5
37
ACL(Brown)
ACN(Blue) 90
32
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
SJTW 14AWGx2C
Vo+(Red)
Vo-(Black)
tc
‧ : Max. Case Temperature
tc
※ B/DA/D2-Type (for other models)
* DIM+ for B-Type
DA+ for DA-Type
PROG+ for D2-Type
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
233
244
220 300±20
300±20
37.5
37
ACL(Brown)
ACN(Blue) 90
32
53.8
71
4-ψ4.5
SJOW 17AWGx2C
2
&H05RN-F 1.0mm
Vo+(Red)
Vo-(Black)
SJOW 17AWGx2C
2
&05RN-F 1.0mm
UL2517 20AWGx2C
UL2517 20AWGx2C
ELG-200 series
File Name:ELG-200-SPEC 2022-03-16
DIM-(Pink)**
DIM+(Purple)*
DIM-(Pink)**
DIM+(Purple)*

144~200W Constant Voltage + Constant Current LED Driver
◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.
INSTALLATION MANUAL
ELG-200 series
AC/L(Brown)
AC/N(Blue)
※ 3Y Model (3-wire input)
PE (Green/Yellow)
‧ : Max. Case Temperature
tc
tc
300±20
90
32
233
244
220
53.8
71
4-ψ4.5
SJOW 17AWGx3C
2
&H05RN-F 1.0mm
SJOW 17AWGx2C
2
&05RN-F 1.0mm
Please refer to : http://www.meanwell.com/manual.html
File Name:ELG-200-SPEC 2022-03-16