What’s Included in your LED Light Kit
•LED Glass Clips and/or LED Pucks –LED glass clips are placed directly onto glass, and emit light throughout the
glass. LED pucks are attached to the surface without the need for any tools, and provide even light distribution.
•RGB Receiver –Transmits signal to the remote, allowing you to control your light settings. Your LED lights are 16
colored, and have different light settings.
•Remote Control –Allows you to easily turn your lights on/off and adjust the color as desired.
•Splitter –Used to connect your lights to your power supply.
•USA Power Supply –Used to power your LED light kit.
How to Install your Lights
1. Before installing, lay out all the products inside of the LED light kit package.
a. Connect each LED light to the splitter.
b. Connect the splitter to the RGB receiver.
c. Connect the RGB receiver to the power supply.
d. Plug the power supply into an outlet and press the ON button using the remote.
e. Check that everything is in working order, and then unplug your power supply & proceed with install.
2. If you have LED glass clips, you can clip them directly onto the back of the glass shelf. Never place LED lights where
they are directly visible (on the front of the shelves), as they will be too bright.
3. If you have LED pucks, make sure the area where you want to attach your LED pucks is clean of dirt and debris, then
attach the lights to the top of the shelves.
4. Finally, re-connect your power supply to the electrical outlet, and use your remote to change the lights to your
desired color.
5. Enjoy your new TV stand lighting!
Troubleshooting
•LED Lights Not Turning On
oCheck your connections to make sure everything is plugged in.
oThe issue might be with the remote (refer to “Remote Not Working” section).
•Remote Not Working
oTry moving closer to the receiver in case your remote is not in range.
oCheck to see if anything is blocking the signal between the remote and the receiver.
oMake sure the receiver is exposed when installing.
•Request a Free Replacement LED Light Kit
oIf you are still experiencing issues after troubleshooting, you can request a replacement LED light kit
shipped to you free of charge. To request a free replacement kit, please do one of the following:
▪Fill out the Parts Request form at www.mebleus.com/parts, or email
help@meblefurniture.com.
