MECA EVO1 Series User manual

EVO1 HB
www.mecasimhardware.com

02 03
Introduction Table of contents
Contents of packaging
Handbrake assembly
04
05
Dear customer, thank you for purchasing our MECA EVO1 handbrake.
This EVO1 handbrake was developed as part of our MECA EVO1 series to
accompany our newest pedal set. Before you install or use the product,
please read the manual which will provide the basic information
required for the first installation and the possible configurations of our
handbrake.
For any further information, please visit the "Support" section on our
website.
MECA EVO1 HB Setup Guide | Introduction MECA EVO1 HB Setup Guide | Table of contents

04 05
Contents of packaging
Handbrake
1x MECA EVO1 handbrake
4x M6x30 screw
8x Steel washer
4x Plastic washer
1x Set of polyurethane bushings
(2x Black, 1x Blue, 1x Orange)
1x Electronic box
Handbrake a s s e m b ly
MECA EVO1 HB Setup Guide | Contents of packaging MECA EVO 1 HB Setup Guide | Handbrake assembly
1x Steel washer
1x M6 nut
1x Steel washer
1x Plastic washer
1x M6x30
Mounting to the rig

06 07
MECA EVO 1 HB Setup Guide | Handbrake assembly MECA EVO 1 HB Setup Guide | Handbrake assembly
Changing handbrake handle
If you wish to change your handbrake handle, you can do so. The handle is mounted on 30mm long M10 thread.
Adjusting handbrake angle
You can adjust handbrake angle using the 4mm allen key and pre-drilled holes
30,00
M10
DETAIL B
MĚŘÍTKO 1 : 1
Before adjusting, you MUST
remove handbrake
from the rig!
Before adjusting angle of
the handbrake, unscrew
only ONE side at the time!
4mm allen key

08
MECA EVO 1 HB Setup Guide | Handbrake assembly
Changing polyurethane bushings
13mm wrench key
1) Unscrew rod from ball joint
2) Remove cup assembly and exchange bushings
Combination Firmness level
Black Black 1
Black Blue 2
Black Orange 3
Blue Orange 4
Polyurethane bushings
Ater every mechanical adjustment, we
recommend to perform recalibration
of the handbrake.
Recommended lubricant
WD-40 PTFE Dry spray
www.mecasimhardware.com
CO NTAC T
Email: [e-mail]
Website: www.mecasimhardware.com