MEDEO ZD-928 Installation and operating instructions

Medeo GmbH, Alexander-Bell-Str. 14, D-53332 Bornheim www.kosmetikfriseurmassage.de
ZD-928 Electric Massage SPA Chair Using Manual
Welcome to use ZD-928 Electric Massage SPA Chair.
Please read the manual before using!
1. Precautionary Instructions
This using manual is only for the operation of the ZD-928 Electric Massage SPA Chair, please note
that we do not take any responsibility if it is used for any other purpose. Do not copy or translate

Medeo GmbH, Alexander-Bell-Str. 14, D-53332 Bornheim www.kosmetikfriseurmassage.de
this manual without permission due to copyright protection.
(1) Maintain the table periodically. Make sure all screws are secure and the cable has not
deteriorated or frayed. Make sure there are no cracks in the wood structure.
(2) Do not overload the table beyond the recommended weight limit. This could result in serious
injury to the user.
(3) Do not use chemical etchant cleaners when cleaning the chromed frame. This could cause
damage to the chrome layer. Use cold water and wipe dry.
(4) Make sure when using the table that all four legs are on a solid surface and at the same level.
2. Installation
(1) The chair itself no need assembly, we have finished assembly before delivery.
(2) You can use this product after removing all packing materials and attached the waste pipe and
cold/hot pipe with your water supply system.
3. Configuration
Item
ZD-928 Foot SPAChair
Specification
Packing size:
130*79*97CM
Product size:
122*52(72 with armrest)*142CM
Frequency:
220V/110
Maximum loading capacity:
175KG
Net weight:
75kg
Gross weight:
80Kg
Removable headrest
Comfortable head support
Neck cushion
Neck support for long use
Adjustable footrest
Satisfied with different height and
modality
Rotatable Armrest
backward and forward 75°
Seat Adjustment：
Forward and backward ±60mm
Backrest adjustment angle:
30°~90°
Basin part
Hand shower
Lead the water in the basin.
Mixing tap
ON/OFF
for cold and hot water
Air switch
ON/ OFF
for the pipeless motor for Jacuzz.
LED lamp
Pipeless motor
Waste Water outlet

Medeo GmbH, Alexander-Bell-Str. 14, D-53332 Bornheim www.kosmetikfriseurmassage.de
Please check the details in following figure:

Medeo GmbH, Alexander-Bell-Str. 14, D-53332 Bornheim www.kosmetikfriseurmassage.de
4. Maintenance
(1) Upholstery Care
Dally Cleaning: Remove daily dirt and grime from the table with a mild soap and warm water
solution, and dry with a soft lint-free cloth.
Disinfecting: Disinfect the table as required, with an iso propanol based hospital grade
disinfectant cleaner (approved for use on polyurethane vinyl).
(2) Stain Removal:
Some minor stains can be removed with a mild non-abrasive cleaner. Spray a damp cloth with
cleaners and gently wipe to remove stain, rinse thoroughly with warm water, and dry with a soft
lint-free cloth. More stubborn stains may require professional cleaning.
(3) Note: Never use harsh or abrasive cleaners or chemicals to clean the table. Doing so may
damage the upholstery. Avoid using any protectants, as they may harm the vinyl.
(4) Iron Care
Your massage table is made of select metal and is finished with chrome that requires no special
care. If desired, you may clean occasionally with a metal care product. Keep the table dry, and
avoid exposure to wet or humid environments, Should the table get wet, quickly and thoroughly
dry with a soft cloth.
5. Fault Diagnosis
When you use the SPA chair and find it break down, please check it according to the chart (1).
Condition
Analysis
Solution
No working for Backrest
Quality problem of control unit
Please contact manufacturer or
distributor to a new one.
Panel button failure
Motor failure
Hot and cold water can
not be switched
Tube dogging
Check and clean the water tube.
Hot water is not connected
Check hot water heater and
reconnect the tube
Hot&Cold faucet is broken
Replace the faucet
No water from shower
Tuhe clogging
Check and clean the water tube
Shower is broken
Replace the shower