Medion MD 23061 User manual

2
Dok./Rev.-Nr. 23061 ML ALDI USA Cover 3003 0611 final
Contents
Package contents..........................................................................................3
Components ..................................................................................................... 5
Connecting elements supplied ..................................................................... 5
Tools supplied................................................................................................... 5
Required tools (not included) ....................................................................... 5
General information .....................................................................................6
Reading and storing the assembly instructions......................................... 6
Proper use......................................................................................................... 6
Explanation of symbols................................................................................... 6
Safety............................................................................................................. 7
Signal symbol/word definitions ....................................................................7
Safety instructions............................................................................................7
First use .........................................................................................................9
Checking the product and package contents............................................. 9
Basic cleaning................................................................................................... 9
Assembly ..................................................................................................... 10
Assembly steps ...............................................................................................10
Cleaning....................................................................................................... 18
Maintenance................................................................................................ 18
Storage ........................................................................................................ 18
Technical data ............................................................................................. 19
Disposal ....................................................................................................... 19
Disposing of the packaging...........................................................................19
Disposing of the product ...............................................................................19

Package contents
3
A
Package contents
4
5
3
9
8
7
6
1 2

Package contents
4
B
11
12
13
14
15
16
17 18 19

Package contents
5
Components
1Monitor arm 6Clamp screw handle, 2×
2Locking handle 7Anti-slip pad, 2×
3VESA plate, 2× 8Cable clip, 4×
4Support pole 9Suppport pole cover
5Clamp bracket 10 VESA bolt holes, 4×
Connecting elements supplied
11 M6×20 mm bolt, 3× 14 M4×12 mm bolt, 8×
12 M6×10 mm bolt, 2× 15 Washer, 8×
13 M5×12 mm bolt, 8× 16 Locking screw
Tools supplied
17 5×5 Hex key 19 3×3 Hex key
18 4×4 Hex key
Required tools (not included)
20 Phillips-head screwdriver
20

General information
6
General information
Reading and storing the assembly instructions
These assembly instructions accompany this dual arm monitor
desk mount (hereafter referred to as the “product”). They contain
important information about safety, use and care.
Before assembling and using the product, read the assembly
instructions carefully. This particularly applies to the safety instructions.
Failure to follow the instructions in these assembly instructions may result in
personal injury or damage to the product.
Store the assembly instructions for further use. Make sure to include these
assembly instructions when passing the product on to third parties.
Proper use
The product is exclusively designed for mounting monitors complying with
VESA standards and to allow easy adjustment to the position of the monitors.
It is only intended for private household use and not suitable for commercial
purposes.
Only use the product as described in these assembly instructions. Any other
use is considered improper and may result in damage to property or persons.
The product is no children’s toy.
The manufacturer or supplier cannot be held liable for damages or injury
incurred through improper or incorrect use.
Explanation of symbols
The following symbols and signal words are used in these assembly
instructions, on the product or on the packaging.
This symbol provides you with useful additional information on
assembly or use.

Safety
7
Safety
Signal symbol/word definitions
The following symbols and signal words are used in these assembly
instructions.
WARNING! This signal symbol/word designates a
hazard with moderate risk, which may
result in death or severe injury if not
avoided.
NOTICE! This signal word warns of possible dam-
age to property.
Safety instructions
WARNING!
Danger of choking and suffocation!
If children swallow small parts or get caught in the packaging,
they may choke or suffocate.
− Keep small parts and packaging wrapper away from children.
− Do not allow children to play with the packaging wrapper.
− Keep children away during assembly. Small parts are
included.
WARNING!
Risk of injury!
Improper use or assembly of the product may result in injury.
− Only competent persons may set up the product.
− Do not exceed the load-bearing capacity of 22 lb (10 kg) per
monitor arm. Otherwise, the product may collapse and
cause injury or damage.
− Make sure that the product is properly installed on a dry,
level, and sufficiently strong work surface to support the
weight of the product and the monitors. Do not mount on
glass surfaces.

Safety
8
− The safety of the product can only be ensured if it has
been properly assembled and all connections have been
secured.
− Children must not play with the product. Cleaning and user
maintenance shall not be performed by unsupervised
children.
− Be aware of where you hold the product when adjusting
the position of the product as there is a risk of fingers
becoming jammed between movable parts.
− Always distribute the weight of the monitors evenly on the
product so that the product cannot overturn.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage.
− It is recommended that at least two adults assemble the
product and mount the monitors to avoid damage.
− When handling the monitors during assembly, cover the
screen with a towel to avoid scratching the screen.
− Never expose the product to high temperatures (heaters,
etc.) or to the effects of the weather (rain, etc.).
− Never attempt to clean the product by immersing it in
water and do not use a steam cleaner to clean it.
− Do not overtighten the bolts as this will add unnecessary
stress on the product.
− Always detach the monitors from the product before
moving the product to another location.
− Stop using the product if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Be aware of the cables when adjusting the positon of the
monitors to avoid stretching or pinching of cables.
− Only use the product indoors. Do not use the product in
damp rooms or in the rain as exposed metal parts may rust.

First use
9
First use
Checking the product and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the individual parts of the product out of the packaging.
2. Check to make sure that all parts are included (see Fig.A andB).
3. Check whether the individual parts of the product exhibit damage. If this
is the case, do not assemble or use the product. Contact the manufacturer
via the service address specified on the warranty card.
Basic cleaning
− Remove the packaging material and all plastic wrappings.
− Clean all parts of the product before first use as described in the chapter
“Cleaning”.

Assembly
10
Assembly
NOTICE!
Risk of damage!
Improper handling of the product may result in damage.
− Cover the screen with a towel during assembly to protect it
from scratches and damage.
− Carefully follow all instructions when assembling the
product.
Assembly steps
Assemble the product following the instructions and illustrations below.
The package contents include spare and optional parts.
Not all parts will be used during assembly. Keep the extra parts
for future use.
1 Checking the back of the monitor .........................................................11
2 Attaching the support pole ...................................................................11
3 Attaching the anti-slip pads ................................................................. 12
4 Attaching the clamp screw handles ..................................................... 12
5 Securing the product to the desk ........................................................ 13
6 Attaching the monitor arm ................................................................... 13
7 Attaching the cable clips....................................................................... 14
8 Attaching the support pole cover......................................................... 14
9 Attaching the monitor .......................................................................... 15
10 Adjusting the monitor position ............................................................ 16
11 Cable management ................................................................................17