Megaman TITO User manual

IP66
FFL71100v0, FFL71200v0, FFL71200v1, FFL71300v0
FFL71100v0
FFL71100v0
FFL71200v0, FFL71200v1, FFL71300v0
FFL71200v0, FFL71200v1, FFL71300v0
A
B
C
Model: A(mm) B(mm) C(mm)
FFL71100v0
FFL71200v0
FFL71200v1
FFL71300v0
11
11
11
11
68
90
90
165
98
150
150
195
18Nm
∊ׁ
TITO
160O
135O
22O
2.5Nm
2.5Nm
H05RN-F/3 x1.0mm2
15O
IP66 (Not Included) 220-240~
N
L
30mm
6mm
40mm
H05RN-F 3×1.0mm²

IP66
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
5m＜H<100m
Weight
(kg)
2.02 583
735
735
3.25
3.66
3.27
470
380
840
610
333
363
419
283
FFL71200v0
FFL71200v1
FFL71300v0
70W
90W
120W
165W
FFL71100v0 251
283
339
363
52
91
91
91
Ambient Temperature
Range
-30°C~+50°C
-30°C~+50°C
-30°C~+50°C
-30°C~+50°C
Project area
(cm²)
1018
W
L
H
(mA)
FFL71100v0, FFL71200v0, FFL71200v1, FFL71300v0
TITO
- The external flexible cable or cord of this luminaire cannot be replaced; if the Cord is damaged, the luminaire shall be destroyed.
- The product must be installed by a qualified electrician.
- The power supply must be turned off before installaon.
- No warranty will be accepted if this product is not installed by a qualified electrician.
- Do not operate the product with a damaged tempered glass; the damaged tempered glass should be replaced by the service agent.
- The driver can’t be replaced.
- When products are installed in high wind environments, appropriate installaon/fastening methods must be applied so that the product mounng points are not damaged due to vibraon,movement or corrosion.
- Good pracce does not recommend connuous use without appropriate switching cycles.
-Replace any cracked protecve shield.