Gama Sonic GS-120 User manual

INFINITY SOLAR UP AND
DOWN WALL LIGHT
Model: GS-120 Version 1.2
Instruction Manual

Solar Wall Light Location
For optimum light duration throughout the
night, it is very important to mount your
solar light in a spot where it will receive the
maximum amount of direct sunlight throughout
the day. A minimum of 2 hours of direct sunlight
is required for basic operation.
NOTE: The following steps are for reference only.
Consult your local hardware store for the best
installation method for your chosen surface.
page 2
Thank you for your purchase. GAMA SONIC® solar charged lights are brighter and last all night with a full day solar charge.
Unique designs, superior light output, and numerous installation options confirm the outstanding value of our product.
For technical assistance and more information call our Toll-Free number:
800-835-4113 (only within the US)
Or
visit our website or download the latest version of your instruction manual:
www.gamasonic.com Or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
NOTE: If you are replacing an existing
gas/electric wall light, you must
consult a certified technician to
disconnect the current outlet before
installation.
NOTE: The solar light must be charged
for two sunny days in the “ON”
position for best results.

page 3
Assembly Instructions (Fig. 1)
Step 1:
Step 2:
Step 3:
Remove the wall bracket by unscrewing the two
screws on the side of the fixture.
Attach the light to the wall bracket using the screws you removed in Step 1.
You are ready to mount the light fixture on the wall.
1. Use a drill to make two holes in the wall where the
lamp will be mounted. (use the wall bracket as a
template for drilling locations)
2. Place the anchors into the holes and place the wall
bracket in line with the holes.
3. Secure using the provided screws.
Locate the operation switches at the bottom of the light
fixture.
1. Turn the operation switch to the LOW or HIGH position
according to your preferences:
· (Low) For softer light and longer duration.
· (High) For brighter light output.
2. Choose between Warm White (WARM) or Bright White
(COOL) color output.
NOTE: The solar lamp will automatically operate at dusk.
Fig. 1
Turn the light ON (Fig. 2):
page 3
Step 3:
Attach the light to the wall bracket using the screws you removed in Step 1.
Locate the operation switches at the bottom of the light
fixture.
1
. Turn the operation switch to the LOW or HIGH position
according to your preferences:
· (Low) For softer light and longer duration.
· (High) For brighter light output.
2
. Choose between Warm White (WARM) or Bright White
(COOL) color output.
NOTE: The solar lamp will automatically operate at dusk.
Turn the light ON (Fig. 2):
Assembly Instructions (Fig. 1)
Attach the light to the wall bracket using the screws you removed in Step 1.
. Use a drill to make two holes in the wall where the
lamp will be mounted. (use the wall bracket as a
. Place the anchors into the holes and place the wall
Fig. 1
Attach the light to the wall bracket using the screws you removed in Step 1.
Fig. 2

page4
Replacing the Battery (Fig. 2):
Replacement batteries are available
at www.gamasonic.com or via our Toll free number: [phone]
1. Make sure the Low/OFF/High switch is in the OFF position.
2. Remove the lamp from the wall by unscrewing the mounting screws on the sides.
3. Unscrew the battery compartment door screw.
4. Pull the battery door down until the battery is fully exposed and you can see the battery
connector.
5. Unclip the connector and remove the old battery.
6. Make sure the new battery is a Gama Sonic – 3.2V/3,000mAh, Li-ion Rechargeable battery
with same connector.
7. Clip on the new battery and install it into the battery compartment.
8. Re-Install the battery compartment cover and attach the lamp back to the wall.
9. Turn the light back ON (see Turn the light ON for more details).
WARNING: Do not dispose of Li-Ion battery in the regular trash, municipal waste stream or by fire
as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may
occur. Preserve our environment by recycling batteries or disposing of them in accordance with
local, State and federal regulations. Do not mix old and new batteries.
Maintenance
Clean the solar module regularly with a damp towel to guarantee
optimum performance of the solar panel. Do not use any type of
solvent for cleaning and be careful not to put too much pressure
on the module while cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite
observance of all the instructions, please try the following steps:
1. Make sure that the solar light is not being affected by any other light source.
2. Ensure the solar light is not positioned in the shade during the day.
3. Make sure the switch in the lamp head is in the” ON” position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar light will vary with the time of year. It will deliver
longer duration when it has had a full day in the sun rather than a day in overcast
weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries
much more efficiently.
WARNING: Please keep out of reach of children.
Make sure the
new battery is
a Gama Sonic -
3.2V/3,000mAh, Li-ion
Rechargeable Battery
with a connector.