Megatel TPLINK Archer VR2100v User manual

Router Set-up Guide
TPLINK Archer VR2100v
Your new router is already programmed, so all you have to do is simply
connect the device to use your internet service.
This guide shows how to set up your router and the WiFi details.
How to change service mode from UFB to DSL
Open your web browser and type the default IP Address 192.168.1.1 in
the address bar. The default password is 'admin'. Type in 'admin' for new
password and conrm password, and click 'Let's Get Started'
1
Please go to 'Advanced' -> 'Operation Mode' and select 'DSL Modem
Router Mode' then Save. The modem is automatically retarted and it takes
2-3 mins.
2
You will nd a solid light on DSL and blinking / solid light on the
Internet This means that your modem is connected to our network.
3
If your Broadband is still not working ...
Megatel Call Centre
Mon - Fri 9am to 6pm Phone [phone] Email [e-mail]

How To Connect To WiFi
How To Set Up Your Router
For ADSL & VDSL
A Connect one end of RJ11 cable into the DSL port on your router.
B Connect the other end to the phone jack on the wall.
1
If you opted for the
internet phone (VoIP), you
will need to connect the
phone cable into Phone 1
port on the router.
If your broadband is connected
correctly, you will nd a solid
light on DSL and blinking /
solid light on the Internet
2
For UFB (Ultra Fast Broadband)
Locate the ONT box on the wall.
1
Conrm that ONT POWER &
OPTICAL lights are on.
2
A Connect one end of a yellow ethernet cable into WAN port on the router.
B Connect the other end to GE1 & LAN4/WAN port on the ONT box.
3
Version 1 Version 2
If your broadband is connected
correctly, you will nd a light on
WAN and blinking / solid
on the Internet
** The WiFi option you select will depend on the size and setting of
your home and the location where your router will be.
5
If you opted for the internet phone (VoIP), you will need to connect the
phone cable into Phone 1 port on the router.
4
Back side of wireless router
WAN
Bottom side of ONT box
You will be able to nd SSID & WiFi Password/PIN
on the back of your router.
Model : Archer VR2100v
AC2100 Wireless MU-MIMO
VDSL/ADSL Telephony Modem Router
Power: 12V = 2A
Default Access:
http: //tplinkmodem.net
TP-Link corporation Limited
Suite 901, New East Ocean
Centre, Tsim Sha Tsui, Hong
Kong
Model : Archer VR2100v Ver:1.0
S/N : 319C02043001566
MAC : CC-32-E5-C0-EK-9F
Wireless Password/PIN : XXXXXXXX
SSID : TP-Link_XXXX
SSID : TP-Link_XXXX_5G
1
This SSID provides WiFi signal to a larger area with
better stability. Please connect to your device
with the Password/PIN, if you are connecting from
a location far away from your router.
This SSID provides faster WiFi speed to a shorter
distance. Please connect to your device with the
Password/PIN, if you are connecting from a
location closer to your router.
1
Model : Archer VR1600v
AC 1600 Wireless Dual Band Glgabit VoIP VDSL/ADSL Modem Router
Power: 12 V = 2A
Default Access:
http: //tplinkmodem.net
Username: admin
Password: admin
Model : Archer VR1600v Ver:2.0
S/N : 319C02043001566
MAC : CC-32-E5-C0-EK-9F
Wireless Password/PIN : XXXXXXXX
SSID : TP-Link_XXXX
SSID : TP-Link_XXXX_5G
1
2
GE1
1
2
2
DSL Cable Phone Cable
LAN1
Power LAN2 LAN3 LAN4/WAN
Reset DECT
DSL Phone1 Phone2
LAN1
Power LAN2 LAN3 LAN4/WAN
Reset DECT
DSL Phone1 Phone2
LAN4/WAN
LAN1
Power LAN2 LAN3 LAN4/WAN
Reset DECT
DSL Phone1 Phone2