Megxon M1 User manual

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 03
註：快速安裝本 1.料 號:XR9000567 2.印刷顏色：單黑色 3.材質：80P 模造紙,騎碼釘
XR9000567
This Quick Start Guide can guide you to use this player with
proper operation and correct setting.
Please read it carefully and optimize the performance in
accordance with your preference.
Quick Start Guide
Appendix
CARD FULL!
MEMORY FULL!
CARD LOCKED!
LOCK ( )
FILE ERROR!
MEMORY ERROR!
CARD ERROR!
NO CARD !
LOW BATTERY !
Dele te th e sto re d image(s ) in the fla sh mem ory.
Messages Causes Solutions
NO FILE!
LOW BATTERY !
FORMAT ERRO R!
There is in suffic ie nt card memory capacit y
for storin g another im age.
There is in sufficie nt internal memory capacity
For storin g another fil e.
The SD card is under protectio n.
The pla yer is locked, the lo ck swit ch is on.
Fil e format error.
Buil t-in memory is damag ed or fail ed.
Card is damaged or fa il ed.
There is no card in serted in t he player.
Battery power is drain ed.
There is no fi le sto red in th e memory card or
buil t-i n flash m emory. O r plea se chec k/adjus t
your setti ngs on STORAGE s etti ngs of SE TUP
mode.
The envir onment is too dar k.
The format of SD/MMC card is not correct.
Dele te the stored im age(s) in the memory
card or insert a new memory card.
Set the card pr otectio n swit ch at non-
protectio n posit ion.
Set the lock sw it ch at off.
Insert a new SD /MMC card or format the
S/DMMC card or bult-in fla sh memory.
Format the S/ DMMC card or bult -in fla sh
memory.
Insert a new SD /MMC card
Need to recharge the pla yer.
Ple ase download th e fil es from your PC or
take pictur es, record vid eos, or vo ic es to
create fil e s.
Fin d a brighter envir onment.
Set the card pr otectio n wit h at non-p rotection
posit io n.
Re-format the SD/MMC card or insert a new
one.
Troubleshooting
If you find the player won't turn on or respond:
Make sure the LOCK Switch is off.
If that doesn't work, please connect your player with adaptor. The
player might need to be recharged.
If that doesn't work, your player might need to be reset. Please use a
ballpoint pen to stab into the Reset button on the side of the player.
Error Message Table

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0302 03
The manual contains the important safety instructions
and information of the device's proper usage. Make
sure to read carefully and understand all the
instructions to avoid accident.
Do not expose the device to extreme temperature
(above 40C), especially in cars with shutting
windows in summer.
Do not expose to moisture. Do not store in humid or
dirty areas.
Avoid the device falling and bumping strongly. Do
not make LCD suffer from violent shake; otherwise,
LCD could be damaged or displayed abnormally.
Choose the suitable volume. Do not turn up the
volume of the earphones too high while using it. If
you get ringing in your ears stop using the device or
turn the volume down.
Do not disassemble the device yourself and do not
wipe the surface of device with alcohol and benzene
and thinners.
Do not using the device in areas with prohibiting
electronic devices, such as in plane.
Do not use the device while driving an automobile or
walking in the street, otherwise, an accident may
result.
Safety Instructions Overall Introduction
External View and Key Function Buttons
Play/
Pause
(Shutter)
Side
Top
Front
Back
Main Menu
Button Power On/Off
Camera Lens
OK Button
LED
Up Button
Right Button
Down Button
Left Button
Top
SD Card Socket
Earphone &
AVOUT
AV IN
DC IN
USB Port
Strap Evelet
Lock Switch
Reset Button
Note: About SD/MMC Card
1. Befor you insert card, plaese
make sure the performance
of this card is normal.
2. Never remove or insert a
memory card or disconnect
USB cable while data is
transmitted.

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0304 05
Getting Ready
1. Battery Charging
You can charge your
battery by connecting
the adaptor in DC IN
Port.
2. Turn On or Off the player
2.1 Trun On
You can press down POWER Button on the top of
player. You will see the screen is showing a start-up
image after you turn on the player.
2.2 Trun Off
Press down POWER Button again will turn off
the player.
Note:
Power Save: When the player idles for a time that reaches
what the user specifies to turn off the player, the player will
be turned off automatically.
LCD Save: When the LCD monitor idles for a time that
reaches what the user specifies to turn off the LCD, the
LCD will be turned off automatically.(Please refer to SETUP
Mode for details.)
Note: Normally, the charging time for the
player is about 3.5 hours. When charging,
LED turns red. After complete charging,
LED is off.
3.Basic Operation
3.1 Menu Introduction (including 12 icons/modes)
3.2 Basic Operation & Key Button Definition
Note: Each icon stands for one mode. You can use the
direction buttons to move the red frame and press OK
Button to enter the mode you've chosen.
Video Audio Photo AV IN
FM Accessory Game Setup
PC Camera
Camera
Video
Recording
Voice
Recording
Note:
Troubleshooting:
If you cannot power on the player, please check and make
sure the LOCK Switch is switch off.
When lock is on , the screen will show “ ” to
remind you.
Switch down LOCK Switch to
disable all the operations
Getting Ready

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0306 07
Getting Ready
3.3 Select a mode
You can choose any mode for playing files or operating setup.
When you press direction button and select one icon on the
screen (the red frame will circle the icon), please press OK
button to enter the mode you've chosen.
Getting Ready
VIDEO
15:2505/15
Main Menu
Main Menu Button
Under any mode, you can press MENU Button
to go back to Main Menu.
OK Button
Confirm your selection
Under Video, Audio,Photo,and
Camera modes, you can press it
for further adjustment.
LED Indicator
When turn on the player,
LED turns green.
When charging the player,
the LED turns red.
UP & Down Button
Under Video, and Audio modes,
you can press them to adjust Volume.
Play/Pause Button
Key function is to play or pause the contents.
When under the Camera mode, you can operate
this button as a shutter button.
Left & Right Button
Under Video, Audio
modes, you can
long-press them to
rewind or fast-forward
the contents.
You can short-press
them to go to previous
or next file and play.
Under FM modes, you
can press them to adjust
Volume. Note: Before you play, please make sure you have video
file in the player or inserted the SD card into it. If there's
no file, the player will remind you.

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0308 09
03:10
00:35
3.4 Icon Display Introduction
7
2 3
8
45 6
910
1.Current Mode
( ) VIDEO
( ) AUDIO
( ) PHOTO
( ) AV IN
( ) RECORDING
( ) VOICE
RECORDING
( ) CAMERA
( ) PC CAMERA
( ) FM
( ) ACCESSORY
( ) GAME
( ) SETUP
5.Battery Status
( ) Battery Full
( ) Battery Half
Drained
( ) Battery Drained
( ) Charging
10.Available Playback
Time (Min : Sec.)
under Audio mode.
11. Fast-forward &
Rewind Bar
3. Repeat Mode
( ) ONE
( ) ALL
( ) RANDOM
6. Memory Status
( ) Memory card
4. Protectd File
7. Current Time
(Hour:Min.)
8. Current Playback
Position (Min: Sec.)
9. Volume Adjust Bar
Getting Ready
15:25
VIDEO
1
1
2. Lock
Note: Only under
Main Menu, “ “ will
show “month/date
” as “05/15”.
1
1
123
VIDEO
Under Video Mode ( )
Play Video
Under Video mode, you will see your video files showing as
Thumbnails on screen. You can choose the video file you
want to play and press to play it. If you want to go back to
Main Menu, please press MENU button.
Advanced Functionality Settings
MP4_0001.ASF
Play: EXIT: MENU
Note: File name and format of
the video file you choose will
show in yellow.
Video
15:25
Video Thumbnails
15:25

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0310 11
When Playing Video...
1. Short press to play the previous video
2. Short press to play the next video
3. Short press to adjust the volume louder
4. Short press to adjust the volume lower
5. Long press to rewind the video
6. Long press to fast-forward the video
7. Press to pause it.
8. Press OK button and press to return to Video
Thumbnails
9.
OK Button for advanced settings
If you press OK button under Video mode, you can have
advanced settings as follows:
1.PLAY: It will play the file you choose after you press OK
button again.
2.REPEAT:
You can choose REPEAT and press to enter the REPEAT
mode as follows to select the way you want to play and
press OK button.
The sound will come out from the built-in speaker if
no earphone is used. If you prefer to play the music
through an earphone, please have the earphone
connected to the Earphone Jack ( ).
PLAY: OK EXIT:
Note:REPEAT Icon Display
( ) Repeat ONE file
( ) Repeat ALL the files
( ) Repeat Randomly
PLAY
REPEAT
PROTECT
DELETE
INFO.
SET: OK BACK:
REPEAT
OFF
ON
ALL
RANDOM
Advanced Functionality Settings
123
3. PROTECT:
This function allows you to prevent your specific videos
from being deleted. If you choose LOCK, the “ “ icon will
show on the screen when you select the specific file. You
can select UNLOCK to cancel the protection.
4.DELETE:
You can delete the file you've selected , if you select delete
ONE. You can also delete all video files once if you select
delete ALL.
5. INFO.:
You can see the related information about this video file and
press to EXIT (go back to Video Thumbnail page).
EXIT:
File name and file format
Video length
File size
The ast Editig File Time
Looked or Unlocked
PROTECT
LOOK
UNLOCK
SET: OK BACK:
DELETE
ONE NO
ALL YES
MP4_0001.ASF
03:54
320X240
03/24/2006 15:00:48
PROTECTED!
Advanced Functionality Settings
SET: OK BACK:

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0312 13
TV Connection
1.Video-out:
(1)Turn on the player and TV set.
(2)Go to SETUP mode of the player and set up the Video
type. (NTSC or PAL)
(3)Connect AV Out port of the player to Video input ports
of the TV set with the supplied Video Cable.
(4)Enter Video/Audio/Photo mode of the player and select
the file you want to show on screen for TV viewing.
2.TV/VCD/DVD player recoding:
(1)Turn on the player and TV set/VCD/DVD player.
(2)Make sure the TV program or VCD/DVD you want to record
is ready.
(3)Connect AV IN port of the player to Video output ports of
TV set/VCD/DVD player with the supplied Video Cable.
(4)Enter the AV IN mode and press to start recording.
Please refer to AV IN mode.
Connecting the Player to a PictBridge-supported Printer
If the printer you have supports the interface of PictBridge,
then you can have your camera connected with the printer by
the supplied USB cable to have the stored images print out
directly.
1.Have both of the player and the printer powered on.
2.Go to the SETUP mode of the player and select the USB
settings on PRINTER.
3.Use the supplied USB cable to connect the player to the
PictBridge-supported printer as shown above.
Printer Connection (PictBridge settings)

02 03
103mm+-1
140mm+1-2
103mm+-1
02 0302 0314 15
How to Connect with a Computer
Computer/Notebook Connection
1.Download files from your computer: Please refer to
Accessory mode, USB settings. After you choose the
Computer connection on USB settings, you can start to
download files from your computer.
2.For the player supports Camera/DV function, with USB
connection, you can also download the image/video files
from the player to your computer.
Computer
PC Connection PC Connection
Downloading the Image(s)
Under Windows Operating System (Windows 2000/ME/XP)
Downloading Image(s) From
Removable Disk
1. Turn on the PC.
2. Switch on the player.
Downloading Image(s) from
Your PC
1. Connect the camera to the PC by USB
cable under any working
mode: Please make sure the USB
cable is well connected to both PC and
player.
2. You can find “removable disk”
showing on your PC.
When you open this disk, you
can find the player will
automatically generate 4
folders including AUDIO,
DCIM,TXT and VIDEO.
AUDIO is for music file.
DCIM is for image file.
TXT is for word file (E-Book).
3. You can download your files
from PC, and save them by
type in the folders seperately.
3. Connect the camera to the PC by
USB cable under any working
mode. Please make sure the USB
cable is well connected to both the
PC and player.
4. When the USB cable is connected
to the PC, there will be a new
hard disk named Removable Disk
showing on the computer.
5. The stored “image(s) can be
found in “Removeable Disk/Dcim
/100media.
6. View the image with a
double-clicks.
Note: If you’ve inserted me mory
card in the player, wh en
connecting wi th PC, your PC wi ll
show 2 new hard disks name d
Removable Disk.
The first one stands for buit-in
memorys; the second one stands
for card me mory.