Meikee 70000001-D1 User manual

Parameters
SKU
Power
LED
Input Voltage
CRI
Luminous Flux
Color Temperature
Dimmable
Ta
70000001-D1
12W
48PCS(LED/S MD2835)
AC85-265V /DC12V/2A
>80
1200LM
3000-6000K
Yes
-20°C- 45°C
Eye-care LED Desk Lamp
Work lighting, care for your eyes. No visible flicker.
Thank you for purchasing our products. Please read the
instructions carefully before use.
1.Installation Precautions
(1). Please carefully check the product whether there is any
breakage before use.
(2). It is forbidden to disassemble and modify this lamp during
the warranty period.
(3). In order to ensure that the lamp works properly, please
use the supplied AC power adapter.
2.Features
Wireless charging Study Mode 6000K Read Mode 5000K Relax Mode 4000K
Sleep Mode 3000K Timer Control Function ON/OFF
Z
Z
25% 50% 75% 100%
Dimming
ON/OFF: After the desk lamp is connected to the adapter
power supply, the indicator light is red. When the desk lamp
is turned on, the red indicator light goes out. The initial on-lamp
defaults to 5000K, 75% brightness mode. At this point touch
other keys, the mode changes with the corresponding function
of the touch key.
Memory function: When the power of the adapter is not off, touch
the ON/OF F mode to turn on the desk lamp, the desk lamp has a
memory function, the memory mode is the last used mode.
Timing function: When the key is touched, the switch key indicator
flashes to indicate entering the timer mode (1H auto off).
Wireless charging: Put the mobile phone with wireless charging
function on the icon. It will automatically charge the device.

Illustration
USB Outlet
12
1
2DC/12V Input
Adapter Interface
90° Rotation
Wireless Charging
270°Rotation
90°+270° Rotation
90°Rotation
Warning
Do not repair, disassemble or modify under any situation.
Do not place the lamp near heat or direct sunlight.
Place on a flat, safe surface.
Use the supplied AC adapter only. (or A C adapter with the
same parameters)
Do not use electrical appliances that are worn or damaged.
Do not touch the lamp when there is water or liquid on your
hands.
Please keep the lamps and all appliances dry and clean.
Unplug the adapter if do not need to use the lamp for a long
time.
Only use a soft dry cloth. Do not use solvents or cleaners.
Do not overload the circuit, as this may cause electric shock
or fire.