menos Kingston 0394001-0200 User manual

Assembly Instructions
Kingston Lounge Set
0394001-0200
August 2021
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.

ABack BSeat CBolt M6x40(mm)
DSteel Wrench EPVC Bolt Cover FAllen Key
x1
x6
x1
x6
x6
x1
Parts List – 2 Seat Sofa
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of ttings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all ttings are only nger tightened
during initial assembly. Only upon completion of the assembly should all xing points be
fullytightened.
5. We recommend a periodic check on all xing points to make sure they remain fully tightened.
6. Keep ttings out of children’s reach.
7. Do not use any other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of xings.

1
2
Assembly – 2 Seat Sofa
E
C
D
A
B
Finished
Ensure the sofa is
protected during
assembly to avoid
damage to the surface

ATable Top BTable Leg CBolt M6x20(mm)
DWasher EPVC Bolt Cover FAllen Key
x1
x8
x2
x8
x8
x1
1
Parts List & Assembly– Coee Table
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of xings.
A
B
BE
C
D
Ensure the table is
protected during
assembly to avoid
damage to the surface

2
Assembly – Coee Table
Finished