Merry Products CAT WASHROOM BENCH MPCB006 User manual

PRODUCT
R R YE
S
M
Please check contents before assembly. If any items are missing or damaged,
Do not take unit back to store. Call 416-597-2291 for customer sevice and we will save you
the time by correcting the problems directly.
COMPONENTS
HARDWARE
Only slight turn of
Cams required.
Do NOT overturn.
Insert threads of Locking Bolts
completely, and stop once threads
are no longer visible.
Do NOT overturn.
NOTE:
* Read all instructions before starting
* Assemble on rug or cardboard to prevent scratches tothe floor and product.
* To ensure proper assembly we have included the following guides:
Reference this guide when assembling all
Cam Locks
Reference this guide when assembling all Locking Bolts .
Page 1 v.1.
MPCB006 CAT WASHROOM BENCH

Insert 7 Locking bolt (J) and 6 Wooden Dowels (K)
into Bottom Board (A2)
STEP 1
J - Locking bolt (x4)
K - Wooden Dowel (x6)
K - Wooden Dowel (x4)
STEP 2
Insert 4 Locking Bolts (J) into side panels (C1, C2) as shown below. (2 on each panel)
STEP 3
Insert 4 Wooden Dowels (K) to connect Back Panel (B)
to Side Panels C1, C2.
Page 2 v.1.

STEP 4
STEP 5
With the help of another adult, carefully lower Back Panel B and
sides C1 and C2 onto Bottom Board A2.
I - Cam (x11)
L - Cover (x11)
Insert and tighten 11 Cams (I) being careful not to overturn. Apply 11 Covers (L) to installed Cams
Only slight turn of
Cams required.
Do NOT overturn.
Page 3 v.1.

STEP 6
STEP 7
Insert 7 Locking Bolts (J) into Top Panel A1
Only slight turn of
Cams required.
Do NOT overturn.
Insert 6 Wooden Dowels (K) into Top Panel (A1) and
carefully lower onto assembled bench base.
Insert 7 Cams (I) and tighten carefully.
Place Covers (L) over installed Cams
J - Locking Bolt (x7)
Page 4 v.1.
K - Wooden Dowel (x 6)
I - Cam (x7)
L - Cover (x7)

STEP 8
STEP 9
Slide Divider (C3) into desired location.
Attach Left Door (D1) and Right Door (D2) using 8 Screws (M)
onto the pre drilled holes.
CARE INSTRUCTIONS
Thank you for choosing MERRY PRODUCTS’™ PET HOUSES AND PET BEDS. With little care and
maintenance, MERRY PRODUCTS’™ PET HOUSES AND PET BEDS will provide your pet with comfort and
enjoyment for many years to come!
• To clean panels, use clean water on a damp cloth.
• When assembling MERRY PRODUCTS’™ PET HOUSES AND PET BEDS, please handle all
panels and/or hardware with care to avoid any possibilities of damages and/or injuries.
Merry Products, Corp.
Page 5 v.1.