manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Merz
  6. •
  7. Dental Equipment
  8. •
  9. Merz BD Load User manual

Merz BD Load User manual

MADE IN GERMANY
en
fr
it
es
pt
de Gebrauchsinformation
Instructions for use
Instructions for use
Mode d’emploi
Istruzioni per l’uso
Instrucciones de uso
Instruções de utilização
Instrukcja użycia
Gebruiksaanwijzing
Bruksanvisning
Brugsanvisning
Bruksanvisning
nl
sv
da
no
pl
lt
lv
et
hu
cs
fi äyttöohje
Informacinis lapelis
Lietošanas informācija
asutusteave
Használati tájékoztatás
Informace k použití
Navodila za uporabo
Návod na použitie
Информация за употреба
Οδηγίες χρήσης
ullanım bilgisidir
sk
bg
el
tr
sl
usa
BDLoad®
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 1
Gebrauchsinformation, bitte aufmerksam lesen!
erwendungszweck
Der BDLoad®dient zur Herstellung von Ober- und Unterkiefer Totalprothesen im Fräsverfahren
zur provisorischen und definitiven Versorgung.
Indikation
• Zahnlosigkeit beider iefer bei eugnather iefersituation
Kontraindikation
• Teilbezahnte iefersituation
• Dysgnathie
• Unverträglichkeit gegen einen der Bestandteile
Eine unsachgemäße erwendung des
BDLoad®
mit dem Ziel, die oben genannten
Indikationsgebiete zu erweitern, ist unzulässig.
Eine unsachgemäße erwendung des
BDLoad®
kann den zu versorgenden Patienten
gesundheitlich beeinträchtigen.
Kennzeichnung
Auf dem BDLoad®sind rückseitig auf einem rückstandslos ablösbaren Primäretikett verschiedene
ennzeichnungen aufgebracht.
1. REF = Merz Dental Artikelnummer
2. LOT = Chargennummer
3. Verwendbar bis
4. Produktspezifikation des BDLoad®
5. Vor Anwendung Gebrauchsinformationen lesen
6. Vor direkter Sonneneinstrahlung schützen
BDLoad®
PMMA-Fräsrohling mit integrierter, funktionsfähiger Zahnaufstellung auf Basis von PMMA
de
Größe
Zähne
Farbe
M m 7
PLSE um2 DF m
A3 light pink
Unterkiefer Größe
BDLoad®
Aufstellung bis
6er oder 7er
Weite
Zahnbogen
Zahnlinie Front Zahnform Front Zahnlinie Seite Zahnform Seite
Zahnfarbe Basisfarbe
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 2
www.baltic-denture-system.de
de
Tip:
Im 2. Quadranten des Oberkiefer BDLoad®(bzw. im 4. Quadranten des Unterkiefer BDLoad®)
ist eine Formbezeichnung eingebracht, die ähnlich der Größenangabe des Primäretikettes auf-
gebaut ist (Größe/Zähne). Diese dient lediglich der internen Rückverfolgbarkeit der BDLoad®bei
Merz Dental. Im Falle eines Verlusts des Primäretikettes kann mittels dieser ennzeichnung die
Größe und die verwendeten Zahnformen des BDLoad®abgelesen werden.
1
2
3
4
5
6
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 3
Zusammensetzung
• Vernetzte Polymethylmethacrylat (PMMA) Copolymere
• Pigmente (vornehmlich Eisen- und Titanoxide)
• Dibenzoylperoxid kann als Restperoxid < 1% enthalten sein
• Methylmethacrylat (MMA) kann als Restmonomer < 1% enthalten sein
erwendung ist nur durch geschultes Fachpersonal zulässig.
Digitale Konstruktion
• Die onstruktion und Generierung der Prothesenbasis erfolgt mit der BDCreator®Software.
• Eine Mindestwandstärke von 2 mm wird softwareseitig vorgegeben.
Maschinelle Bearbeitung
Sowohl Nass- als auch Trockenfräsverfahren mit geeignetem Spannsystem sind möglich.
Vor der Bearbeitung ist die ompatibilität mit dem jeweiligen Maschinenhersteller zu klären.
• Der BDLoad®kann nur in einer vom jeweiligen Maschinenhersteller für diese Geometrie
freigegebenen Spannvorrichtung verwendet und gefräst werden.
• Die maschinelle Bearbeitung des BDLoad®erfolgt mit einer speziellen CAM-Software und
mit Fräsern, die zur Bearbeitung von PMMA geeignet sind.
• Zahnform, BDLoad®-Größe und Farbe sind auf dem Primäretikett des BDLoad®
angebracht und müssen mit den Angaben in der Software übereinstimmen.
Ausarbeitung nach dem Fräsvorgang
• Zum Heraustrennen und Nachbearbeiten von Prothesenbasen aus dem BDLoad®sollten für
unststoff geeignete kreuzverzahnte Hartmetallfräser verwendet werden.
• Um Passungenauigkeiten nach der Erstellung zu vermeiden, sollte während des Ausarbeitens
und Polierens starke Wärmeentwicklung vermieden werden.
• Eine Mindestwandstärke von 1,5 mm sollte bei dünn auslaufenden Flächen nach dem
Ausarbeiten möglichst nicht unterschritten werden.
Wiederherstellung
Prothesenbasen, die aus dem BDLoad®gefertigt worden sind, können mit altpolymerisaten
auf der Basis von MMA wie z. B. Weropress®oder Combipress N in der Farbe BDLoad®pink
jederzeit wiederhergestellt, ergänzt oder unterfüttert werden. Eine vorherige onditionierung der
Oberfläche mit artConnect ist erforderlich.
Lagerung
• Zum Schutz der integrierten Zahnreihen ist der BDLoad®in der Verpackung zu lagern.
• Vor direkter Sonneneinstrahlung schützen.
Besondere Hinweise
• Die LOT-Nr. ist bei jedem Vorgang anzugeben, der eine Identifikation des Materials erfordert,
zwecks Rückverfolgbarkeit muss das ablösbare Etikett aufbewahrt werden.
• BDLoad®nach Ablauf des angegebenen Haltbarkeitsdatums nicht mehr verwenden.
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 4
Gefahrenhinweise
• Bei der Bearbeitung des BDLoad®können Stäube entstehen, die zur Reizung von Augen, Haut
und Atemwegen führen können. Achten Sie daher immer auf ein einwandfreies Funktionieren
der Absauganlage sowohl an Ihrer Fräsmaschine als auch bei der Ausarbeitung und Politur
mit einem Handstück oder der Poliereinheit.
• Die Verwendung von persönlicher Schutzausrüstung ist gemäß Sicherheitsdatenblatt zu
beachten.
• Eine unsachgemäße Verwendung des BDLoad®mit dem Ziel, die oben genannten Indikations-
gebiete zu erweitern, ist unzulässig.
• Eine unsachgemäße Verwendung des BDLoad®kann den zu versorgenden Patienten
gesundheitlich beeinträchtigen.
• Der Einsatz von nicht autorisierten Systemkomponenten in Verbindung mit dem
Baltic Denture System ist unzulässig.
Systemkomponenten
• Die Liste der freigegebenen Systemkomponenten ist bei www.baltic-denture-system.de im
Bereich Service abrufbar.
Detaillierte Informationen entnehmen Sie bitte dem jeweiligen Sicherheitsdatenblatt -
auf Anfrage und zum Download auf www.merz-dental.de erhältlich.
Entsorgung
Der BDLoad®ist wasserunlöslich, inaktiv, birgt keine Gefahr für das Grundwasser und kann daher
im normalen Hausmüll entsorgt werden.
Die Produkteigenschaften basieren auf Einhaltung und Beachtung dieser
Gebrauchsinformation.
Stand der Information 2017-02
www.baltic-denture-system.de
de
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 5
Instructions for use, please read carefully!
Intended use
BDLoad®serves to fabricate upper and lower jaw full dentures by milling for temporary and final
restorations.
Indication
• Edentulism of both jaws with a eugnathic jaw situation
Contraindication
• Partially edentulous jaw situation
• Dysgnathia
• Intolerance to one of the components
Improper use of
BDLoad®
with the aim of extending the above indication areas is
inadmissible.
Improper use of
BDLoad®
can impair the health of the patients treated.
Identification
Various identifiers are to be found on a detachable primary label without leaving any residue on
the back of BDLoad®.
1. REF = Merz Dental article number
2. LOT = lot number
3. useable up
4. Product specification of the BDLoad®
5. Read the instructions for use prior to using
6. Protect against direct sunlight
BDLoad®
milling blank with integrated, functional dental set-up based on PMMA
Size
Teeth
Colour
M m 7
PLSE um2 DF m
A3 light pink
Lower jaw High load Set-up to the first
or second molar
Wide dental arch
Front tooth line Front tooth shape Tooth line Page Tooth shape Page
Tooth colour Base colour
en
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 6
www.baltic-denture-system.de
Tip:
A shape identifier is marked in the 2nd quadrant of the BDLoad®in the upper jaw (or BDLoad®
lower jaw in the 4th quadrant), which is similar to the size specification of the primary label
(Size/teeth). This serves solely for internal traceability of the BDLoad®at Merz Dental. In the event
of loss of the primary label, this identifier allows the size and the tooth shape of the BDLoad®used
to be read.
1
2
3
4
5
6
en
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 7
Composition
• Cross-linked polymethylmethacrylate (PMMA) copolymers
• Pigments (primarily iron and titanium oxide)
• Dibenzoylperoxide may be contained as residual peroxide < 1%
• Methylmethacrylate (MMA) may be contained as residual monomer < 1%.
Use is only admissible by trained technical personnel.
Digital design
• The denture base is designed and generated using the BDCreator®software.
• A minimum wall thickness of 2 mm is specified by the software.
Machine processing
Both wet and dry milling processes are possible with the suitable clamping system.
Compatibility should be clarified with the respective machine manufacturer prior to processing.
• BDLoad®can only be used and milled in a clamping device approved by the respective
machine manufacturer for this geometry.
• BDLoad®is machine processed using special CAM software and with burs suitable for
processing PMMA.
• Tooth shape, BDLoad®size and shade are stated on the BDLoad®primary marking and must
match the specifications in the software.
Trimming following the milling process
• Cross-cut carbide burs suitable for resin should be used to separate and rework denture
bases from the BDLoad®.
• To prevent inaccurate fitting after production, avoid excessive heat development during
trimming and polishing.
• The wall thickness for tapered thin surfaces following finishing should not be below a
minimum of 1.5 mm if possible.
Restoration
Denture bases produced from BDLoad®can be restored, supplemented or lined at any time
with MMA-based cold-curing polymers, such as Weropress®or Combipress N in the shade
BDLoad®pink.
Storage
• BDLoad®has to be stored in the packaging to protect the integrated row of teeth.
• Protect against direct sunlight.
Special notes
• Record the LOT number with every process that requires identification of the material;
the detachable label must be kept for the purposes of traceability.
• Do not use BDLoad®after the specified expiration date.
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 8
Risk phrases
• Processing BDLoad®generates dust that can irritate the eyes, skin and airways. Therefore
always ensure that the extraction on your milling machine and for finishing and polishing
with a handpiece or polishing unit is working correctly.
• The use of personal protective equipment in accordance with the Material Safety Data Sheet
must be observed.
• Improper use of BDLoad®with the aim of extending the above indication areas is inadmissible.
• Improper use of BDLoad®can impair the health of the patients treated.
• The use of non-authorised system components in conjunction with the Baltic Denture System
is inadmissible.
System components
• The list of approved system components is available at www.baltic-denture-system.de
in the Service section.
For detailed information please see the applicable Material Safety Data Sheet, available
upon request or as download from www.merz-dental.de.
Disposal
BDLoad®is water-insoluble, inactive, does not pose a threat to groundwater and may therefore be
disposed of with normal household waste.
The product properties are based on compliance with the instructions for use.
Date of information 2017-02
www.baltic-denture-system.de
en
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 9
Instructions for use, please read carefully!
Caution:
Federal (USA) law restricts this device by or on the order of al licensed dental practitioner.
Intended use
BDLoad®serves to fabricate upper and lower jaw full dentures by milling for temporary and final
restorations.
Indication
• Edentulism of both jaws with a eugnathic jaw situation
Contraindication
• Partially edentulous jaw situation
• Dysgnathia
• Intolerance to one of the components
Improper use of
BDLoad®
with the aim of extending the above indication areas is
inadmissible.
Improper use of
BDLoad®
can impair the health of the patients treated.
Identification
Various identifiers are to be found on a detachable primary label without leaving any residue on
the back of BDLoad®.
1. REF = Merz Dental article number
2. LOT = lot number
3. useable up
4. Product specification of the BDLoad®
5. Read the instructions for use prior to using
6. Protect against direct sunlight
BDLoad®
milling blank with integrated, functional dental set-up based on PMMA
usa
Size
Teeth
Colour
M m 7
PLSE um2 DF m
A3 light pink
Lower jaw High load Set-up to the first
or second molar
Wide dental arch
Front tooth line Front tooth shape Tooth line Page Tooth shape Page
Tooth colour Base colour
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 10
www.baltic-denture-system.de
Tip:
A shape identifier is marked in the 2nd quadrant of the BDLoad®in the upper jaw (or BDLoad®
lower jaw in the 4th quadrant), which is similar to the size specification of the primary label
(Size/teeth). This serves solely for internal traceability of the BDLoad®at Merz Dental. In the event
of loss of the primary label, this identifier allows the size and the tooth shape of the BDLoad®used
to be read.
1
2
3
4
5
6
usa
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 11
Composition
• Cross-linked polymethylmethacrylate (PMMA) copolymers
• Pigments (primarily iron and titanium oxide)
• Dibenzoylperoxide may be contained as residual peroxide < 1%
• Methylmethacrylate (MMA) may be contained as residual monomer < 1%.
Use is only admissible by trained technical personnel.
Digital design
• The denture base is designed and generated using the BDCreator®software.
• A minimum wall thickness of 2 mm is specified by the software.
Machine processing
Both wet and dry milling processes are possible with the suitable clamping system.
Compatibility should be clarified with the respective machine manufacturer prior to processing.
• BDLoad®can only be used and milled in a clamping device approved by the respective
machine manufacturer for this geometry.
• BDLoad®is machine processed using special CAM software and with burs suitable for
processing PMMA.
• Tooth shape, BDLoad®size and shade are stated on the BDLoad®primary marking and must
match the specifications in the software.
Trimming following the milling process
• Cross-cut carbide burs suitable for resin should be used to separate and rework denture
bases from the BDLoad®.
• To prevent inaccurate fitting after production, avoid excessive heat development during
trimming and polishing.
• The wall thickness for tapered thin surfaces following finishing should not be below a
minimum of 1.5 mm if possible.
Restoration
Denture bases produced from BDLoad®can be restored, supplemented or lined at any time
with MMA-based cold-curing polymers, such as Weropress®in the shade BDLoad®pink.
Storage
• BDLoad®has to be stored in the packaging to protect the integrated row of teeth.
• Protect against direct sunlight.
Special notes
• Record the LOT number with every process that requires identification of the material;
the detachable label must be kept for the purposes of traceability.
• Do not use BDLoad®after the specified expiration date.
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 12
Risk phrases
• Processing BDLoad®generates dust that can irritate the eyes, skin and airways. Therefore
always ensure that the extraction on your milling machine and for finishing and polishing
with a handpiece or polishing unit is working correctly.
• The use of personal protective equipment in accordance with the Material Safety Data Sheet
must be observed.
• Improper use of BDLoad®with the aim of extending the above indication areas is inadmissible.
• Improper use of BDLoad®can impair the health of the patients treated.
• The use of non-authorised system components in conjunction with the Baltic Denture System
is inadmissible.
System components
• The list of approved system components is available at www.baltic-denture-system.de
in the Service section.
For detailed information please see the applicable Material Safety Data Sheet, available
upon request or as download from www.merz-dental.de.
Disposal
BDLoad®is water-insoluble, inactive, does not pose a threat to groundwater and may therefore be
disposed of with normal household waste.
The product properties are based on compliance with the instructions for use.
Date of information 2017-02
www.baltic-denture-system.de
usa
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 13
Mode d’emploi, à lire attentivement !
Usage prévu
BDLoad®est conçu pour la réalisation de prothèses totales des maxillaires supérieur et inférieur
avec un procédé de fraisage en vue d'une restauration provisoire ou définitive.
Indication
• Édentation totale des deux maxillaires et occlusion équilibrée
Contre-indication
• Édentation partielle des maxillaires
• Dysgnathie
• Intolérance à l'un des composants
Une utilisation non conforme de
BDLoad®
dans le but d'élargir le champ d'indication
ci-dessus est interdite.
Une utilisation non conforme de
BDLoad®
peut avoir des conséquences sur la santé du
patient.
Identification
Une étiquette d'origine détachable apposée sur la partie arrière de BDLoad®présente différentes
mentions.
1. REF = référence article de Merz Dental
2. LOT = numéro de lot
3. Date limite d'utilisation
4. Spécification de BDLoad®
5. Lire le mode d'emploi avant toute utilisation
6. À protéger des rayons directs du soleil
BDLoad®
Disque de fraisage en PMMA avec montage de dents intégré et fonctionnel à base de PMMA
fr
Taille
Dents
Couleur
M m 7
PLSE um2 DF m
A3 light pink
Maxillaire inférieur Taille de
BDLoad®
Montage jusqu'à
6 ou 7
Portée arcade
dentaire
Teinte des dents Teinte de la base
Ligne de dents
Antérieur Forme de dents
Antérieur Ligne de dents
Postérieur Forme de dents
Postérieur
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 14
fr
www.baltic-denture-system.de
Astuce :
sur le 2equadrant du maxillaire supérieur BDLoad®(ou 4equadrant du maxillaire inférieur
BDLoad®est indiquée une forme qui correspond à la taille indiquée sur l'étiquette d'origine
(taille/dents). Ces indications servent à la traçabilité interne de BDLoad®chez Merz Dental. En cas
de perte de l'étiquette d'origine, ce marquage permet de déduire la taille et les formes de dents
utilisées de BDLoad®.
1
2
3
4
5
6
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 15
Composition
• Copolymère réticulé de polyméthacrylate de méthyle (PMMA)
• Pigments (principalement oxyde de fer et de titane)
• Peut contenir < 1 % de peroxyde de dibenzoyle comme peroxyde résiduel.
• Peut contenir < 1 % de méthacrylate de méthyle (MMA) comme monomère résiduel.
L'utilisation est réservée aux professionnels formés.
Conception numérique
• La conception et la génération de la base de prothèse sont réalisées avec le logiciel
BDCreator®.
• Le logiciel considère par défaut une épaisseur de paroi minimale de 2 mm.
Traitement assisté par ordinateur
Le fraisage aussi bien sec que mouillé avec système de serrage adapté est possible. Avant
l'usinage, il convient de vérifier la compatibilité avec le fabricant correspondant de la machine.
• BDLoad®peut être utilisé et usiné uniquement sur un dispositif de serrage validé pour cette
géométrie par le fabricant de la machine.
• L'usinage de BDLoad®est réalisé avec un logiciel de CAO spécial et des fraises adaptées à
l'usinage du PMMA.
• La forme de la dent, la taille de BDLoad®et la teinte figurent sur l'étiquette principale de
BDLoad®et doivent être conformes aux spécifications du logiciel.
Finition après le fraisage
• Pour dégager et retoucher les bases de prothèse de BDLoad®, il convient d’utiliser des
fraises en métal dur à dents étagées convenant à la résine.
• Pour éviter des imprécisions d’ajustage après la fabrication, il convient d’éviter un fort
dégagement de chaleur pendant l’exécution et le polissage.
• Une épaisseur minimale de 1,5 mm doit être respectée sur les surfaces minces après les
retouches.
Restauration
Les bases de prothèse réalisées avec BDLoad®peuvent à tout moment être reproduites,
complétées ou rebasées à l'aide de polymères à froid à base de MMA comme par exemple
Weropress®ou Combipress N dans la couleur BDLoad®pink.
Stockage
• Pour protéger les rangées de dents intégrées, BDLoad®doit être conservé dans son
emballage.
• À conserver à l’abri des rayons directs du soleil.
Remarques particulières
• Indiquer le numéro de lot lors de chaque procédure exigeant l’identification du matériau.
Pour garantir la traçabilité, l'étiquette détachable doit être conservée.
• Ne plus utiliser BDLoad®après la date de péremption indiquée.
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 16
Indications de dangers
• Les travaux effectués avec BDLoad®gênèrent des poussières pouvant irriter les yeux, la peau
et les voies respiratoires. Il convient donc de toujours veiller au fonctionnement irréprochable
du dispositif d’aspiration aussi bien sur la fraiseuse que pour la finition et le polissage avec
une pièce à main ou une unité de polissage.
• L'utilisation d'un équipement de protection individuelle doit être conforme à la fiche de données
de sécurité.
• Une utilisation non conforme de BDLoad®dans le but d'élargir le champ d'indication ci-dessus
est interdite.
• Une utilisation non conforme de BDLoad®peut avoir des conséquences sur la santé du patient.
• L'utilisation de composants de système non autorisés avec Baltic Denture System est interdite.
Composants de système
• La liste validée de composants de système peut être consultée sur le site
www.baltic-denture-system.de, à la section Service.
Pour des informations détaillées, veuillez consulter la fiche de données de sécurité
correspondante - que vous pouvez obtenir sur demande ou télécharger du site
www.merz-dental.de.
Élimination
BDLoad®est insoluble dans l’eau, inerte, ne représente aucun danger pour la nappe phréatique et
peut de ce fait être éliminé avec les ordures ménagères.
Les qualités du produit reposent sur l’observation et le respect de ce mode d’emploi.
Date de dernière mise à jour 2017-02
www.baltic-denture-system.de
fr
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 17
Istruzioni per l’uso, leggere attentamente!
Destinazione d’uso
Il BDLoad® è indicato per la realizzazione in un processo di fresatura di protesi totali superiori
e inferiori per la riabilitazione provvisoria e definitiva.
Indicazioni
• Edentulia totale di entrambe le arcate in una situazione eugnatica
Controindicazioni
• Edentulia parziale
• Disgnazia
• Intolleranza ad uno dei componenti
Un uso improprio del
BDLoad®
con lo scopo di ampliare i campi di indicazione sopra citati
non è consentito.
Un uso improprio del
BDLoad®
può causare danni alla salute del paziente da riabilitare
protesicamente.
Etichettatura
Sul retro del BDLoad®, in una etichetta primaria rimovibile senza residui sono riportati diversi
dati.
1. REF = Codice prodotto Merz Dental
2. LOT = Numero del lotto
3. Data di scadenza
4. Specifiche di prodotto del BDLoad®
5. Prima dell’uso leggere le istruzioni per l'uso
6. Proteggere dalla luce solare diretta
BDLoad®
Grezzo da fresare con denti a base di PMMA integrati e funzionali
it
Misura
Dentie
Colore
M m 7
PLSE um2 DF m
A3 light pink
Arcata inferiore Misura
BDLoad® Ampiezza arcata
Montaggio fino ai
6 o ai 7
Colore denti Colori base
Linea anteriori Forma anteriori Linea posteriori Forma posteriori
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 18
itit
www.baltic-denture-system.de
Suggerimento:
Nel quadrante 2 del BDLoad®arcata superiore (e nel quadrante 4 del BDLoad®arcata
inferiore) è inserita una denominazione della forma composta in modo analogo all’indicazione della
misura nell’etichetta primaria (Misura/Denti). Essa serve unicamente ai fini della rintracciabilità
interna del BDLoad®presso Merz Dental. Qualora l’etichetta primaria vada perduta, con questa
marcatura è possibile identificare la misura e le forme dei denti del BDLoad®.
1
2
3
4
5
6
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 19
Composizione
• Copolimeri di polimetilmetacrilato (PMMA) reticolati
• Pigmenti (prevalentemente ossidi di ferro e titanio)
• Dibenzoilperossido può essere contenuto come perossido residuo < 1%
• Metilmetacrilato (MMA) può essere contenuto come monomero residuo < 1%.
L’uso è consentito solamente a professionisti addestrati.
Progettazione digitale
• La progettazione e la generazione della base protesica vengono effettuate con il software
BDCreator®.
• Nel software è prestabilito uno spessore minimo delle pareti di 2 mm.
Lavorazione meccanica
Sono possibili sia la lavorazione a umido che a secco con un sistema di serraggio idoneo.
Prima della lavorazione è necessario verificare la compatibilità con il produttore della macchina
operatrice.
• Il BDLoad®può essere utilizzato e fresato solamente in un dispositivo di serraggio approvato
dal produttore della macchina operatrice per questa forma specifica.
• La lavorazione meccanica del BDLoad®si esegue con uno speciale software CAM e con frese
idonee per la lavorazione del PMMA.
• La forma dentale, la misura del BDLoad®e il colore sono riportati sull’etichetta primaria del
BDLoad®e devono corrispondere ai dati presenti nel software.
Rifinitura dopo il processo di fresatura
• Per separare le basi protesiche dal BDLoad®e per la rifinitura utilizzare frese al carburo di
tungsteno a taglio incrociato adatte per resina.
• Per evitare imperfezioni nella precisione dimensionale dopo la realizzazione, evitare un
eccessivo sviluppo di calore durante la rifinitura e la lucidatura.
• Per le superfici a finire sottili si raccomanda di rispettare quanto più possibile lo spessore
minimo di 1,5 mm dopo la rifinitura.
Riparazione
Le basi protesiche realizzate con il BDLoad®possono sempre essere riparate, integrate o
ribasate con resine polimerizzanti a freddo a base di MMA come ad esempio Weropress®o
Combipress N di colore BDLoad®pink.
Conservazione
• Per proteggere i denti integrati, il BDLoad®deve essere conservato nella sua confezione.
• Proteggere dalla luce solare diretta.
Avvertenze particolari
• Indicare il numero del lotto (LOT) in ogni procedura che richieda l’identificazione del materiale;
l’etichetta staccabile deve essere conservata per consentire la rintracciabilità.
• Non utilizzare il BDLoad®dopo la data di scadenza indicata.
GI_BDLoad_in _022017.qxp_Layou 1 09.02.17 11:55 Sei e 20

Popular Dental Equipment manuals by other brands

Guilin Woodpecker Medical Instrument Endo Radar Pro instruction manual

Guilin Woodpecker Medical Instrument

Guilin Woodpecker Medical Instrument Endo Radar Pro instruction manual

Bien Air CA 1:2.5 L MS Instructions for use

Bien Air

Bien Air CA 1:2.5 L MS Instructions for use

Soredex Cranex D Alignment procedure

Soredex

Soredex Cranex D Alignment procedure

BEYES Maxso X200 Instructions for use

BEYES

BEYES Maxso X200 Instructions for use

FKG Rooter Universal user manual

FKG

FKG Rooter Universal user manual

DARAY SL730LW Operating & installation manual

DARAY

DARAY SL730LW Operating & installation manual

SAEVO FT 412 owner's manual

SAEVO

SAEVO FT 412 owner's manual

DENTSPLY AEU-25T Operation and maintenance instruction manual

DENTSPLY

DENTSPLY AEU-25T Operation and maintenance instruction manual

Tiger Dental PowerScrew 8 Instructions for use

Tiger Dental

Tiger Dental PowerScrew 8 Instructions for use

Maxray Cocoon Training manual

Maxray

Maxray Cocoon Training manual

SICAT JMT+ quick guide

SICAT

SICAT JMT+ quick guide

Blaupunkt DIR501 instruction manual

Blaupunkt

Blaupunkt DIR501 instruction manual

Ivoclar Vivadent Programat EP 3000 G2 operating instructions

Ivoclar Vivadent

Ivoclar Vivadent Programat EP 3000 G2 operating instructions

Tecno-gaz PEARL user manual

Tecno-gaz

Tecno-gaz PEARL user manual

KaVo 4040 Operating, Maintenance and Assembly Instructions

KaVo

KaVo 4040 Operating, Maintenance and Assembly Instructions

Sirona C3 Plus Installation requirements

Sirona

Sirona C3 Plus Installation requirements

KERR ENDODONTICS Elements Connect Instructions for use

KERR ENDODONTICS

KERR ENDODONTICS Elements Connect Instructions for use

Spectra CAM-X quick start guide

Spectra

Spectra CAM-X quick start guide

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.