Metabo KS 54 - User manual

188 |
THE NUMBER
ONE CHOICE
FOR THE
PROFFESSIONAL
The Metabo circular saw range is built for outright precision
and quality. Built tough for the demands of the professional,
machines with long life motors, safety clutches, large rip fences,
solid all metal gear housings, riving knifes and quick cut blades
fitted as standard are available within the range. Metabo. Work.
Don’t play.
SAWS

| 189
SAWS

190 |
KS 66KS 54KSAP 18
CIRCULAR SAWS
Special advantages
Sturdy aluminum die cast
saw housing

Cutting indicator can
be set precisely

Extraction nozzle rotatable
and stoppable

Auto-stop carbon brushes 
Comparative
device characteristics
Torque 4 Nm 9 Nm
Maximum cutting depth
at 90°
54 mm 66 mm
Maximum cutting depth
at 45°
38 mm 47 mm
Cutting depth adjustable 0 - 54 mm 0 - 66 mm
Saw blade diameter 160 mm 190 mm
No load speed 6.000 /min 4.200 /min
Rated input power 1.010 W 1.400 W
Output power 630 W 800 W
Rated load speed 4.200 /min 3.200 /min
Cutting speed at rated load 35 m/s 28 m/s
Weight (without mains cable) 3,4 kg 5,5 kg
Standard equipment Carbide thin
circular saw blade
(10 teeth), parallel
guide/ripping
fence, allen key
Carbide thin
circular saw blade
(14 teeth), parallel
guide/ripping
fence, allen key
Type KS 54 KS 66
Order no. 6.00540 6.00542 
COMMON FEATURES

Metabo S-automatic torque limiting clutch

Spindle lock

Fully closed guide plate for secure support

Clearly visible cutting indicator for sawing after initial cut

Safety lock switch to prevent unintentional start of the machine

Angle adjustment of the sawing blade to the guide plate can be
aligned for maximum cutting precision

Angle-precise bevel cuts up to 45°

Lubrication system for long service life of the gear

Optimum sawing dust ejection

External dust extraction outlet

Precision guide rail available as accessory (order no. 6.31250)
1010 Watt
Circular Saw
KS 54
1400 Watt
Circular Saw
KS 66
Type KSAP 18
Order no. 6.02168
Comparative
device characteristics
Type of battery pack Li-Ion
Battery pack voltage 18 V 1)
Capacity of battery pack 2,2 Ah
Cutting depth adjustable 0 - 53,5 mm
Maximum cutting depth at 90° 53,5 mm
Maximum cutting depth at 45° 42 mm
Saw blade diameter 165 mm
No load speed 2.500 /min
Weight (including battery pack) 4,3 kg
Standard equipment Carbide circular saw blade
(18 teeth), 2 Li-Ion battery packs
(18 V/2.2 Ah), hexagon spanner,
"AIR COOLED" quick charger
AC 30 Plus
18 Volt
Cordless Circular Saw
KSAP 18

Ideal handling by ergonomic design

especially high sawing capacity per battery pack

Carbide circular saw blade

Easy saw blade replacement with spindle lock

Fully closed guide plate for secure support

Precisely adjustable and well visible cutting indicator
for sawing after initial cut

Suitable for bevel cuts up to 47°

Safety lock switch to prevent unintentional start of the machine

Built-in collector fan to prevent overheating

Sturdy aluminum die cast saw housing

Rubber-coated handle

External dust extraction outlet
1) at nominal voltage,
maximum voltage of 20 Volts
... 40% more
output with
40% less weight
EQUIPMENT FEATURES

| 191
KS 66 Plus KSE 68 Plus
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
CIRCULAR SAWS
NEW NEW
Special advantages

Quick stop of saw blade on shutting
off the machine


Vario Tacho Constamatic (VTC) full-wave
electronics


Thumbwheel for preselection of speed 

Electronic soft start 

Overload protection 

Two position riving knife lift point 
Comparative device characteristics
Torque 9 Nm 11 Nm
Maximum cutting depth at 90° 66 mm 68 mm
Maximum cutting depth at 45° 47 mm 48 mm
Cutting depth adjustable 0 - 66 mm 0 - 68 mm
Saw blade diameter 190 mm 190 mm
No load speed 4.200 /min 2.000 - 4.200 /min
Rated input power 1.400 W 1.600 W
Output power 800 W 850 W
Rated load speed 3.200 /min 4.200 /min
Cutting speed at rated load 28 m/s 42 m/s
Weight (without mains cable) 5,5 kg 5,6 kg
Standard equipment Carbide thin circular saw blade (14 teeth),
parallel guide/ripping fence, allen key
Carbide thin circular saw blade (14 teeth),
parallel guide/ripping fence, allen key
Type KS 66 Plus KSE 68 Plus
Order no. 6.00544 6.00545
COMMON FEATURES

Metabo S-automatic torque limiting clutch

Spindle lock

Sturdy aluminum die cast saw housing

Sturdy guide plate made from light-weight magnesium die cast

Fully closed guide plate for secure support

Stylish rubber insert on the top handle to aid a comfortable
and secure grip

Long double-guided parallel rip fence, can be used left or right

Clearly visible cutting indicator for sawing after initial cut

Safety lock switch to prevent unintentional start of the machine

Angle adjustment of the sawing blade to the guide plate can be
aligned for maximum cutting precision

Angle-precise bevel cuts up to 45°

Lubrication system for long service life of the gear

Optimum sawing dust ejection

External dust extraction outlet

Extraction nozzle rotatable and stoppable

Auto-stop carbon brushes

Precision guide rail available as accessory (order no. 6.31213)

Adjustment of machine without tools for using on the precision
guide rail 6.31213
1400 Watt
Circular Saw
KS 66 Plus
1600 Watt
Electronic Circular Saw
KSE 68 Plus

192 |
ACCESSORIES FOR CIRCULAR SAWS
Accessories
Order no.
Precision guide rail
Clean-cut edges with no
splintering thanks to the guide
rail's plastic-extrusion strip edging
– even with bevel cuts up to 45°
Guide rail made of sturdy,
anodised Aluminium extrusion
Anti-slip backing provides safe
and reliable support and protects
the workpiece surface against
scratches
Guide rule, adjustable to
eliminate play
suitable for: Metabo jig saws,
circular saws and router models
OFE 738 and Of E 1229 Signal
(when using the appropriate
accessories; KS 66 Plus,
KSE 68 Plus can be used)
Overall length: 1.500 mm
6.31213
NEW
Connector
For joining together
two precision guide rails
6.31211
NEW
Set of two clamps
For fixing the precision guide rail
on the workpiece or work table
6.31031
NEW
Guide plate
For use with the KSAP 18,
KS 54 and KS 54 SP circular saws
on the 6.31213 guide rail.
Complete guide plate with
2 mounted aluminium
threaded bushes for the
circular saws
6.31019
NEW
Adapters
For use with the KS 66 and
KSE 68 Plus circular saws
(alt. Order No. 6.00543)
on the 6.31213 guide rail.
6.31020
Sawdust ejection nozzle
Can be rotated
For fitting the suction
hose on the circular saw
KS 54 and KSE 55 Plus
6.30924
Suction hose
With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Connector Ø: 58/35 mm
Hose length: 3,5 m
Suction hose Ø: 27 mm
6.31938
Metabox IV
Extremely robust, unbreakable
boxes with a wide carrying handle
Carefully thought-out organisation
system within the box... ensures
that the correct accessory is always
with the right tool - special inserts
for storing accessories and small
parts... and transferring them from
box to box - boxes can be stacked
and connected - well-structured,
clearly arranged storage system,
for the workshop, the car, anywhere
The Metabox stays in shape -
even at extreme temperatures
(-40° to +90°C)
No protruding parts, and thus no
danger of getting caught up, e.g.
on building sites
Dimensions: 395 x 295 x 315 mm
For KS 54, KSE 55 Plus, KS 66
For KS 66 Plus, KSE 68 Plus
6.24595
6.24598
Work benches
Order no.
Flexo 500 universal table
For the stationary use of
Metabo jig saws, routers and
circular saws (when using
appropriate accessories)
With foldable stand and
height adjustment
Sturdy steel construction and a large
table top made from continuous
strand casting
0910064304
Special accessories for Flexo 500
Order no.
Circular saw set
For Metabo KS 54,
KSE 55 Plus, KS 66,
KSE 68 Plus circular saws
Packaging dimensions (LxHxW):
750 x 280 x 130 mm
0910064398
Table width extension
Increases the supporting
surface; ideal for
large boards
Enables cuts with
parallel guide of
up to 610 mm
Height adjustable
Length: 674 mm
Width: 501 mm
0910064401
Parallel guide/ripping fence
For long cuts or for cutting
large boards
Long attachment profile
for guiding the work
piece safely
0910063707
Mitre guide
Length of rule: 250 mm
Angle area: +/- 60°
0910064410
Chip and dust extraction unit
Extraction at two points:
at chip box and at the
top on the guard
Clear view of the
work piece
Cleaner working
environment
Extraction nozzle Ø: 100 mm
0910064371
NEW
NEW
NEW
GB
GB
GB
GB
GB
GB

| 193
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
CIRCULAR SAW BLADES
FOR CIRCULAR SAWS
• For fast, coarse and semi-fine cuts with continuous feed rates
• Good cutting results for straight cuts in solid wood
• Partly usable for construction wood with nails and concrete residue
• With coated wood or other composites only coarse cut quality is possible
Carbide-tipped circular saw blades
"power cut"
NEW
Diameter
mm
Cutting
width
mm
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
suitable for Order no.
152 2,4 1,6 20 12 Flat top tooth 15° Ks 0852 S 6.28001
160 2,2 1,4 20 10 Alternately bevel-ground tips 22° KS 54 / KSE 55 Plus 6.28002
167 2,4 1,6 20 12 Flat top tooth 15° Ks 1155 S 6.28003
190 2,6 1,8 20 14 Alternately bevel-ground tips 25° Ks 1266 S / Ks 1468 S 6.28004
190 2,2 1,4 30 14 Alternately bevel-ground tips 25° KS 66 / KSE 68 Plus 6.28005
190 2,2 1,4 30 16 Flat/trapezoid tooth 12° KS 66 / KSE 68 Plus 6.280061)
210 2,6 1,8 30 16 Flat top tooth 25° Ks E 1678 S-Signal 6.28007
230 2,6 1,8 30 18 Flat/trapezoid tooth 10° KS 85 6.280101)
230 2,6 1,8 30 24 Alternately bevel-ground tips 20° KS 85 6.280111)
1) exceptionally nail-proof saw blade
Carbide-tipped circular saw blades
"precision cut"
NEW
Diameter
mm
Cutting
width
mm
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
suitable for Order no.
160 1,6 1,1 20 24 Alternately bevel-ground tips 22° KSAP 18 6.28030
160 2,2 1,4 20 24 Alternately bevel-ground tips 20° KS 54 6.28031
167 2,4 1,6 20 20 Alternately bevel-ground tips 20° Ks 1155 S 6.28032
167 2,4 1,6 20 40 Alternately bevel-ground tips 10° Ks 1155 S 6.28033
190 2,6 1,8 20 48 Alternately bevel-ground tips 10° Ks 1266 S/ Ks 1468 S 6.28034
190 2,2 1,4 30 48 Alternately bevel-ground tips 15° KS 66 / KSE 68 Plus 6.28035
210 2,6 1,8 30 56 Alternately bevel-ground tips 10° Ks E 1678 S-Signal 6.28040
230 2,6 1,8 30 56 Alternately bevel-ground tips 15° KS 85 6.28044
Carbide-tipped circular saw blades
"multi cut"
NEW
Diameter
mm
Cutting
width
mm
Steel blade
thickness
mm
Bore-Ø
mm
Number
of teeth
Tooth form Rake
angle
suitable for Order no.
150 2,4 1,6 20 36 Alternately bevel-ground tips 10° Ks 0852 S 6.28000
152 2,4 1,6 20 54 Flat/trapezoid tooth 5° neg. Ks 0852 S 6.28070
160 2,2 1,4 20 30 Alternately bevel-ground tips 5°+/-1.5 KS 54 / KSE 55 Plus 6.28071
160 2,2 1,4 20 42 Alternately bevel-ground tips 15° KS 54 / KSE 55 Plus 6.28072
160 2,2 1,4 20 54 Flat/trapezoid tooth 8° KS 54 / KSE 55 Plus 6.28073
167 2,4 1,6 20 42 Flat/trapezoid tooth 6° neg. Ks 1155 S 6.28074
190 2,2 1,4 30 36 Alternately bevel-ground tips 5°+/-1.5 KS 66 / KSE 68 Plus 6.28075
190 2,6 1,8 20 54 Flat/trapezoid tooth 5° neg. Ks 1266 S / Ks 1468 S 6.28076
190 2,2 1,4 30 56 Flat/trapezoid tooth 8° KS 66 / KSE 68 Plus 6.28077
210 2,6 1,8 30 54 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28078
210 2,8 2,0 30 60 Alternately bevel-ground tips 5° neg. Ks E 1678 S-Signal 6.28079
210 2,8 2,0 30 60 Flat/trapezoid tooth 5° neg. Ks E 1678 S-Signal 6.28080
230 2,6 1,8 30 60 Alternately bevel-ground tips 5° KS 85 6.28085
230 2,6 1,8 30 60 Flat/trapezoid tooth 8° KS 85 6.28086
• Very wide range of uses in woodworking
• For very good, clean cut results with straight or cross cutting in softwood and hardwood
• Well suited for solid and plywoods, chipboards untreated, coated or veneered, MDF, composite materials
• The circular saw must have a high performance motor
• Universal use for demanding materials
• For the highest standards in cutting quality, e.g. laminate, plastic, aluminium, copper and bronze materials
• Ideally suited for many applications in interior work
• Perfect cutting results, also when crosscutting, in solid wood, coarse, coated or veneered chipboards, MDF
• The circular saw must have a very high performance motor
• Requires steady and relatively slow feed rates

194 |
JIG SAWS
OTHERS SOMETIMES JUST DON‘T CUT IT.
Metabo offer a solid range of Jigsaws from entry level
through to top end professional machines. Backed up
with an extensive range of accessories these machines
are capable of cutting a whole host of materials from
wood, metals, plastics, brick and breeze block to fiber
glass and rubber. Important features include high
powered motors, tough gear housings, solid blade sup-
ports and variable speed electronics to enable the right
speed selection for the job in hand.
Powerful for continuous professional use
The 720-Watt electronic orbital jigsaws
enable saw cuts of up to 135 mm thickness
in wood.
Absolutely straight or circular cuts
Additional accessories such as guide rails
or circular guides expand the range of
applications of the Metabo jigsaws.
Vario Constamatic (VC) full-wave electronics
The number of strokes can be adapted
individually to the material to be cut. For
metal, for example, it is low, for wood it is
high.
Ergonomic design
Safe and comfortable
work due to a model
that fits perfectly in the
hand.
5-level pendulum
blade movement
High cutting output,
more comfortable wor-
king, longer service life
of saw blades.
Quick stop
of guide plate
It enables bevel
cuts with angle
settings of 15, 30
and 45°.
Vario Constamatic (VC) electronics
allow you to set the right speed for
the application and then maintain that
speed, even under moderate loading.
Die cast aluminium
gear housing
Metal gear housings
ensure optimum inte-
gral machine strength
and maximum heat
dissipation which aids
motor cooling and
prolongs service life.
Metabo „Quick“
saw blade
change
Fast, convenient
and safe. Saw
blade change
without key.
Saw blade support
roller with needle
bearing and guide groove
Precise saw cuts, as
the support roller is
particularly deep.

| 195
STE 80 QuickSTE 70ST 50 Pendix
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
Special advantages
Metabo "Quick" saw
blade change

Vario Constamatic (VC)
full-wave electronics

Thumbwheel for preselection
of number of strokes

Comparative device characteristics
Torque 4 Nm 5 Nm 5,5 Nm
Maximum thickness of material in
- Wood 50 mm 70 mm 80 mm
- Nonferrous metals 10 mm 20 mm 25 mm
- Sheet steel 3 mm 6 mm 8 mm
Levels of pendulum stroke 4 4 4
Strokes at no load 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 400 W 570 W 610 W
Output power 240 W 340 W 360 W
Weight (without mains cable) 2,2 kg 2,2 kg 2,3 kg
Standard equipment Grip-guard, chip break guard
plate, jig saw blade, allen key
Protective glass, grip-guard,
chip break guard plate,
jig saw blade, allen key
Protective glass, grip-guard,
attachable guard plate with chip
break guard plate, jig saw blade,
allen key
Type ST 50 Pendix STE 70 STE 80 Quick
Order no. 6.04000 6.05700 6.06100 
COMMON FEATURES

Robust gear and motor design

Easier and quicker saw blade change

Low lying saw blade supporting roller

Quick locking of guide plate for bevel cuts

Ideal handling by ergonomic design

Full grip bow type handle

Blower for free view of cutting line

Upward slidable grip-guard

Adjustable pendulum stroke

External dust extraction outlet

Auto-stop carbon brushes

Chip break guard in the guide plate

Precision guide rail and guiding device available
as accessory

Case for allen key
400 Watt
Orbital Jig Saw
ST 50 Pendix
570 Watt
Electronic
Orbital Jig Saw
STE 70
610 Watt
Electronic
Orbital Jig Saw
STE 80 Quick
JIG SAWS

196 |196 |
STE 100 Plus STE 135 Plus STEB 135 STEB 135 PlusSTE 135
JIG SAWS
Special advantages
Powerful cutting in wood
up to 135 mm thickness

Easier and quicker saw blade
change

Metabo "Quick" saw blade
change

Rubber-coated full grip
bow-type handle

Slim motor housing and
additional knob

Comparative
device characteristics
Torque 6 Nm 7 Nm 7 Nm 7 Nm 7 Nm
Maximum thickness
of material in
- Wood 110 mm 135 mm 135 mm 135 mm 135 mm
- Nonferrous metals 25 mm 35 mm 35 mm 35 mm 35 mm
- Sheet steel 8 mm 10 mm 10 mm 10 mm 10 mm
Levels of pendulum stroke 5 5 5 5 5
Strokes at no load 1.000 - 2.800 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min 1.000 - 3.000 /min
Rated input power 680 W 720 W 720 W 720 W 720 W
Output power 400 W 450 W 450 W 450 W 450 W
Weight (without mains cable) 2,6 kg 2,5 kg 2,5 kg 2,6 kg 2,6 kg
Standard equipment Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Extraction nozzle,
protective glass,
grip-guard, chip
break guard plate,
jig saw blade,
allen key
Type STE 100 Plus STE 135 STE 135 Plus STEB 135 STEB 135 Plus
Order no. 6.10501 6.11100 6.10900 6.11200 6.11000 
COMMON FEATURES

Robust gear and motor design

Low lying saw blade supporting roller

Quick locking of guide plate for bevel cuts

Ideal handling by ergonomic design

Blower for free view of cutting line

Upward slidable grip-guard

Vario Constamatic (VC) full-wave electronics

Thumbwheel for preselection of number of strokes

Adjustable pendulum stroke

Die cast aluminium gear housing

External dust extraction outlet

Auto-stop carbon brushes

Chip break guard in the guide plate

Precision guide rail and guiding device available
as accessory

Case for allen key
680 Watt
Electronic
Orbital Jig Saw
STE 100 Plus
720 Watt
Electronic
Orbital Jig Saw
STE 135
720 Watt
Electronic
Orbital Jig Saw
STE 135 Plus
720 Watt
Electronic
Orbital Jig Saw
STEB 135
720 Watt
Electronic
Orbital Jig Saw
STEB 135 Plus

| 197| 197
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
ACCESSORIES FOR JIG SAWS
Jigsaw blade assortments with single lug bayonet shank
Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch,
DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...
Order no.
Jigsaw blade assortment 1
For wood and metal
HCS saw blades/
HSS saw blade
Consisting of 1 saw blade each:
6.23634, 6.23633, 6.23637
Material suitability:
Wood, Metal
Number of parts: 3
6.23968
Jigsaw blade assortment 2
For wood, metal and plastic
HCS saw blades/
HSS saw blade
Consisting of 1 saw blade each:
6.23633, 6.23635, 6.23632, 6.23631
und 6.23637
Material suitability:
Wood, Plastics, Metal
Number of parts: 5
6.23645
Jigsaw blade assortment 3
For wood, metal and plastic
HCS saw blades/
HSS saw blades
Consisting of 2 jigsaw blades each:
6.23634, 6.23633, 6.23646,
6.23637, 6.23638
Material suitability:
Wood, Metal, Plastics
Number of parts: 10
6.23600
Jigsaw blade assortment 4
For wood
HCS saw blades
Consisting of 10 saw blades
6.23633 and 6.23635 and
5 saw blades 6.23649
Material suitability: Wood
Number of parts: 25
6.23698
Accessories
Order no.
Guard plate
For fitting on the base
plate of jigsaws. The guard
plate protects sensitive
workpiece surfaces
from scratches
6.23664
Circle-cutting and
parallel guide
For cutting circles of Ø 100
to Ø 360 mm and
for cutting parallel
to an edge (maximum distance
from the edge 210 mm)
6.31340
Guiding device
For using jigsaws
in conjunction
with the guide
rail 6.31250/ 6.31213
6.31249
Precision guide rail
Clean-cut edges with no
splintering thanks to the
guide rail's plastic-extrusion
strip edging – even with bevel
cuts up to 45°
Guide rail made of sturdy,
anodised Aluminium extrusion
Anti-slip backing provides
safe and reliable support
and protects the workpiece
surface against scratches
Guide rule, adjustable
to eliminate play
Overall length: 1.500 mm
6.31213
Order no.
Connector
For joining together
two precision guide rails
6.31211
Set of two clamps
For fixing the precision
guide rail on the
workpiece
or work table
6.31031
Jigsaw bench mounting plate
With clamp for fixing on the
workbench
Table-top dimensions:
183 x 255 mm
6.23689
Flexo 500 universal table
For the stationary use
of Metabo jig saws,
routers and circular
saws (when using
appropriate accessories)
With foldable stand and
height adjustment
Sturdy steel construction
and a large table top
made from continuous
strand casting
0910064304
Table width extension
Increases the supporting surface;
ideal for large boards
Enables cuts with parallel guide
of up to 610 mm
Height adjustable
Suitable for: UK 333, UK 290,
Flexo 500
Length: 674 mm
Width: 501 mm
0910064401
Lubricating stick
For lubricating the
jigsaw blades when
sawing metal
6.23443
3 chip break guard plates
Suitable for:
ST 50 Pendix,
STE 70, STE 80 Quick
6.31208
3 chip break guard plates
Suitable for: STE 100 Plus,
STE 135, STE 135 Plus,
STEB 135, STEB 135 Plus
6.23665
Suction hose
With connector Ø 58 mm
for bayonet fitting and rubber
connector (internal Ø 30 mm,
outside Ø 35 mm)
Hose length: 3,5 m
Suction hose Ø: 27 mm
6.31938
Carry case
For ST 50 Pendix, STE 70,
STE 80 Quick
6.25450
Carry case
For STE 100 Plus, STE 105 Plus,
STEB 105 Plus, STE 135,
STE 135 Plus, STEB 135,
STEB 135 Plus
6.25446
Metabox I for ST 50-STEB 135
For ST 50 Pendix, STE 70,
STE 80 Quick, STE 100 Plus,
STE 135 Plus, STEB 135 Plus
Dimensions: 395 x 295 x 105 mm
6.24639
NEW
NEW
NEW
NEW
NEW
GB
GB

198 |
198 |
JIG SAW BLADES
WITH THESES ONE ALWAYS MAKES A GOOD CUT.
Colour
The colour indicates for which material the blade is suited best.
Yellow for wood
Yellow with blue lettering for wood with nails
Blue for metal
Black for special applications
Quality class
>classic< series good results and very good service life
>professional< series fast, clean and precise angle-cutting with long service life
>pionier< series cuts fast through all materials ("through thick & thin")
>expert< series for special applications
Basic blade material
HCS carbon steel, for cutting soft wood, hardboards, plastics
HSS High yielding high-speed steel, suitable for metal, aluminium work
BiM Bimetal especially flexible mix of HCS and HSS. The saw blades have a much higher life expectancy
(bimetal) than HCS and HSS and have proven their worth when there is danger of shaft-breaking
HM Hard-Metal (carbide) applicable to stainless steels, glass, re-inforced plastic, plastics, gypsum
plaster or cement fibre boards. Saw blades with HM-coating are suitable for cutting ceramic tiles
Shank forms
The jig-saw blades from Metabo are produced to all shank forms matching the
jig saws available from other brand names.
Type
Teeth milled,
waved for clearance
gap
A relative rough cut,
fast progress in cutting
hard and soft wood,
aluminium, NE-metals
and plastics
Teeth ground,
offset for clearance
gap
Fast cutting in hard
and soft wood
Teeth ground, offset
for clearance angle
and clearance gap
Fine and clean cut in
wood and plastics
Teeth milled,
offset for clearance gap
A relative rough cut,
fast progress in cutting
on hard and soft wood,
aluminium, NE-metals
and plastics
The features of the Metabo jig saw blades
Single lug bayonet
shank
U-Shank Makita-Shank Fine shank

| 199
| 199
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
JIG SAW BLADES
Jig saw blades with single lug bayonet shank
Suitable for Metabo, AEG, Atlas Copco, Black & Decker, Bosch, DeWalt, Elu, Festo, Hitachi, Holz-Her, Kress, Makita, Skil ...
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
FOR WOOD, "CLASSIC" SERIES
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material
Milled, Crimped HCS 51 2,0 mm T 119 B 5 6.23631
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-15 mm,
Fibre boards 2-15 mm, Plastics,
Insulating material, Saw blade
with insertion head
Milled, Crimped HCS 66 1,9 - 2,3 mm/
23-17 TPI/
progressiv
T119B 5 6.23920
Hard wood, Soft wood, Chipboards,
Wood-core plywood 2-20 mm,
Fibre boards 2-20 mm, Plastics,
Insulating material, Especially
for curved cuts
Milled, Crimped HCS 51 2,0 mm T 119 BO 5 6.23646
25 6.23605
Hard wood, Soft wood,
Plastics, 4-50 mm,
For quick,
rough cuts
Milled, Crossed HCS 74 3,0 mm T 111 C 3 6.23963
5 6.23632
25 6.23606
100 6.23714
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
For quick cuts
Ground, Crossed HCS 74 4,0 mm T 144 D 3 6.23964
5 6.23633
25 6.23690
100 6.23712
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
For quick cuts, Saw blade
with insertion head
Ground, Crossed HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 144 D 5 6.23921
Hard wood, Soft wood,
Chipboards,
Wood-core plywood 5-50 mm,
Especially for curved cuts
Ground, Crossed HCS 74 4,0 mm T 244 D 3 6.23966
5 6.23649
25 6.23607
100 6.23713
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 5-50 mm,
Especially for curved cuts,
Saw blade with insertion head
Ground, Crossed HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 244 D 5 6.23960
Hard wood, Soft wood,
Chipboards, Wood-core
plywood 2-15 mm,
Fibre boards,
For quick cuts
Ground, Crossed HCS 126 4,0 mm T 344 D 5 6.23678
Hard wood, Soft wood,
Chipboards, Wood-core
plywood, Fibre boards,
Constructional wood, Extra thick
Ground, Crossed HCS 150 4,0 mm T 744 D 5 6.23603
Soft wood, Plywood,
Plastics, 1.5-5 mm,
Especially for curved cuts,
For clean cuts
Clearance angle
ground, Tapered
HCS 57 1,4 mm T 101 AO 5 6.23651
25 6.23624

200 |
23634 HCS >professional<Holz/wood >>
JIG SAW BLADES
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts
Clearance angle
ground,
Teeth ground
HCS 74 2,5 mm T 101 B 3 6.23961
5 6.23634
25 6.23691
100 6.23703
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Plastics, 3-30 mm, For clean cuts,
Saw blade with insertion head
Clearance angle
ground,
Teeth ground
HCS 74 2,7 mm/ 9 TPI T 101 B 5 6.23969
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre boards,
Coated boards, 3-30 mm,
For clean cuts
Clearance angle ground,
Teeth ground,
Reverse toothed
HCS 74 2,5 mm T 101 BR 5 6.23650
25 6.23608
100 6.23705
Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts
Clearance angle
ground,
Teeth ground
HCS 74 4,0 mm T 101 D 3 6.23962
5 6.23635
25 6.23609
100 6.23704
Hard wood, Soft wood, Chipboards,
Wood-core plywood 10-45 mm,
Fibre boards 10-45 mm,
For clean cuts,
Saw blade with insertion head
Clearance angle
ground,
Teeth ground
HCS 74 4-5,2 mm/
6-5 TPI/
progressiv
T 101 D 5 6.23923
Hard wood, Soft wood, Chipboards,
Wood-core plywood 4-60 mm,
Fibre boards 4-60 mm,
For clean cuts
Clearance angle
ground,
Teeth ground
HCS 91 3,0 mm T 301 CD 5 6.23654
Hard wood, Soft wood, Doors,
Kitchen worktops 5-50 mm,
For angle-precise cuts,
Extra thick
Ground, Crossed HCS 74 4,0 mm T 144 DP 5 6.23694
Hard wood, Soft wood, Chipboards,
Wood-core plywood 5-100 mm,
Fibre boards 5-100 mm,
For angle-precise cuts,
Extra thick
Ground,
Teeth ground
HCS 104 4,0 mm T 344 DP 5 6.23679
Kitchen worktops,
Hard wood 3-65 mm,
Soft wood 3-65 mm, Doors,
For angle-precise cuts,
Extra thick
Clearance angle
ground,
Teeth ground
HCS 91 2,5 mm T 301 BCP 5 6.23685
FOR WOOD, "PROFESSIONAL" SERIES, BIM
Hard wood, Soft wood,
Coated boards, 5-50 mm,
For quick cuts
Ground, Crossed BiM 74 4,0 mm T 144 DF 5 6.23976
Hard wood, Soft wood,
Wood with nails,
Coated boards, 5-50 mm,
For quick cuts,
Saw blade with insertion head
Ground, Crossed BiM 74 4-5,2 mm/
6-5 TPI/
progressiv
T 144 DF 5 6.23933
Hard wood, Soft wood,
Coated boards, 5-100 mm,
For quick cuts
Ground, Crossed BiM 126 4,0 mm T 344 DF 5 6.23980

| 201
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
JIG SAW BLADES
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plywood, Especially for curved cuts,
For clean cuts
Clearance angle
ground,
Teeth ground,
Ta p e r e d
BiM 57 1,4 mm T 101 AOF 5 6.23695
Especially for laminate,
Laminated flooring, Hard wood,
Soft wood, Coated boards,
Plastics, 2-30 mm, For clean cuts
Clearance angle
ground,
Teeth ground,
Ta p e r e d
BiM 74 1,7 mm T 101 AIF 5 6.23948
Hard wood, Soft wood,
Laminated flooring,
Coated boards,
Plastics, 3-30 mm,
For clean cuts,
Saw blade with insertion head
Clearance angle
ground,
Teeth ground
BiM 74 2,7 mm T 101 BF 5 6.23975
Especially for laminate,
Laminated flooring,
Kitchen worktops 3-30 mm,
Coated boards,
For clean cuts
Clearance angle
ground,
Teeth ground,
Reverse toothed
BiM 74 2,5 mm T 101 BRF 5 6.23686
Hard wood,
Soft wood,
Coated boards, 4-60 mm
Clearance angle
ground,
Teeth ground
BiM 91 3,0 mm T 301 CDF 5 6.23696
Hard wood, Soft wood,
Chipboards,
Glued woods 5-80 mm,
Fibre glass reinforced
plastics, 5-30 mm,
For quick cuts
Clearance angle
ground,
Teeth ground
BiM 105 3,0 mm T 301 CLF 5 6.23977
Hard wood, Soft wood,
Wood with nails,
Non-ferrous metals, Plastics
Ground BiM 90 2,5 mm T 111 HF 5 6.23949
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards,
For quick cuts
Clearance angle
ground,
Teeth ground
HCS 91 2,0-3,0 mm,
progressiv
T 234 X 5 6.23675
25 6.23617
UNIVERSAL, "PIONEER" SERIES
Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics
Crossed, Milled BiM 106 2,4-5,0 mm,
progressiv
T 345 XF 5 6.23677
25 6.23621
FOR METAL, "CLASSIC" SERIES
Sheet steel, 0.5-1.5 mm,
Non-ferrous metals
Milled, Crimped HSS 66 0,7 mm T 118 G 3 6.23967
5 6.23636
25 6.23693
Sheet steel, 1-3 mm,
Non-ferrous metals
Milled, Crimped HSS 51 1,2 mm T 118 A 3 6.23965
5 6.23637
25 6.23692
100 6.23706
Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts
Milled, Crimped HSS 51 1,2 mm T 218 A 5 6.23647

202 |
JIG SAW BLADES
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with insertion head
Milled, Crimped HSS 66 1,1-1,5 mm/
23-17 TPI/
progressiv
T 118 A 5 6.23924
Sheet steel, 1-3 mm,
Non-ferrous metals,
Especially for curved cuts,
Saw blade with insertion head
Milled, Crimped HSS 66 1,1-1,5 mm/
23-17 TPI/
progressiv
T 218 A 5 6.23926
Sheet steel, 1-3 mm,
Non-ferrous metals,
sandwich materials
Milled, Crimped HSS 106 1,2 mm T 318 A 5 6.23629
25 6.23623
100 6.23716
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Milled, Crimped HSS 51 2,0 mm T 118 B 5 6.23638
25 6.23618
100 6.23707
Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with insertion head
Milled, Crimped HSS 66 1,9-2,3 mm/
13-11 TPI/
progressiv
T 118 B 5 6.23925
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Milled, Crimped HSS 106 2,0 mm T 318 B 5 6.23697
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm,
Non-ferrous metals
Milled, Crimped BiM 57 1,2 mm T 118 AF 5 6.23971
100 6.23708
Sheet steel, 1-3 mm,
Non-ferrous metals,
Saw blade with
insertion head
Milled, Crimped BiM 66 1,1-1,5 mm/
23-17 TPI/
progressiv
T 118 AF 5 6.23950
Sheet steel, 1-3 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas
Milled, Crimped BiM 106 1,1 mm T 318 AF 5 6.23978
Sheet steel, 2.5-6 mm,
Sandwich materials 2-65 mm,
Non-ferrous metals, Plexiglas
Milled, Crimped BiM 106 1,8 mm T 318 BF 5 6.23979
Sheet steel, 1.5 4 mm,
Especially for curved cuts
Milled, Crimped BiM 57 1,5 mm T 118 EOF 5 6.23970
Sheet steel, 2.5-6 mm,
Non-ferrous metals
Milled, Crimped BiM 57 2,0 T 118 BF 5 6.23973
Sheet steel, 2.5-6 mm,
Non-ferrous metals,
Saw blade with
insertion head
Milled, Crimped BiM 66 1,9-2,3 mm/
13-11 TPI/
progressiv
T 118 BF 5 6.23929
Sheet steel, 2.5-6 mm,
Sandwich materials 2-120 mm,
Non-ferrous metals, Plexiglas
Milled, Crossed BiM 150 2,0 mm T 718 BF 5 6.23604
Sheet steel, 2-5 mm,
Non-ferrous metals
Milled, Crimped BiM 50 1,5 mm T 118 EF 5 6.23972

| 203
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
JIG SAW BLADES
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
FOR METAL, "PIONEER" SERIES
Sheet steel, 1.5-10 mm,
Non-ferrous metals up to 30 mm
Milled, Crossed HSS 74 1,4 - 2,6 mm,
progressiv
T 123 X 5 6.23676
25 6.23620
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics,
For quick cuts
Milled, Crossed HSS 74 3,0 mm T 127 D 5 6.23639
25 6.23622
100 6.23709
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Especially for curved cuts
Milled, Crossed HSS 74 3,0 mm T 227 D 5 6.23648
Aluminium 3-15 mm,
Non-ferrous metals 4 -20 mm,
Plastics, For quick cuts
Milled, Crossed BiM 75 3,0 mm T 127 DF 5 6.23974
FOR STAINLESS STEEL, "EXPERT" SERIES
Stainless steel sheets (Inox) 1-2 mm,
Non-ferrous metals
Ground carbide 57 1,1 mm T 118 AHM 3 6.23662
Stainless steel sheets (Inox) 2-4 mm,
Non-ferrous metals
Ground carbide 57 1,4 mm T 118 EHM 3 6.23663
FOR PLASTICS, "EXPERT" SERIES
Fibre glass reinforced plastics,
Corian 4-60 mm
Ground carbide 91 3,3 mm T 301 CHM 3 6.23687
FOR GYPSUM CARTON/CEMENT MATERIALS, "EXPERT" SERIES
Gypsum plaster,
Cement fibre boards 5-50 mm,
Fibre glass reinforced
plastics, 5-20 mm,
Ground carbide 74 4,3 mm T 141 HM 1 6.23652
Gypsum plaster,
Cement fibre boards 5-80 mm,
Fibre glass reinforced
plastics, 5-50 mm,
Ground carbide 106 4,3 mm T 341 HM 1 6.23688
3 6.23671
FOR PLEXIGLAS, "EXPERT" SERIES
Plexiglas, Polycarbonate 2-20 mm,
Non-ferrous metals 2 -10 mm
Clearance angle ground,
Teeth ground
HSS 74 2,0 mm T 101 A 5 6.23640
FOR SOFT MATERIALS, "EXPERT" SERIES
Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm
Knife-blade ground,
Straight
HCS 74 T 113 A 5 6.23641
Expanded polystyrene, Cardboard,
Leather, Rubber, Carpet up to 50 mm
Knife-blade ground,
Crimped
HCS 126 T 313 AW 3 6.23684
FOR CERAMIC MATERIALS, "EXPERT" SERIES
Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron
Coarse Carbide,
coated
76 - T 130 Riff 1 6.23657
Ceramic, Glass,
Fibre glass reinforced plastics,
Cast iron
Fine Carbide,
coated
76 - T 150 Riff 1 6.23658

204 |
JIG SAW BLADES
Jig saw blades with Fein shank
Suitable for FEIN jig saws
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corresponds
to
Bosch type
Packing
unit
Order
no.
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 10-40 mm
Clearance angle ground,
Teeth ground
HCS 60 3,0 mm F 1 C 5 6.23992
Hard wood, Soft wood,
Wood-core plywood,
Fibre boards 10-40 mm
Clearance angle ground,
Teeth ground
HCS 60 4,0 mm F 1 D 5 6.23993
FOR METAL, "CLASSIC" SERIES
Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 50 0,7 mm F 18 G 5 6.23996
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 60 1,2 mm F 18 AF 5 6.23994
Sheet steel, 2.5-6 mm,
Plastics
Milled, Crimped BiM 60 2,0 mm F 18 BF 5 6.23995
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium,
Non-ferrous metals 3-15 mm,
Pipes up to 30 mm,
Profiles up to 30 mm
Milled, Crossed BiM 75 3,0 mm F 127 DF 5 6.23997
Jig saw blades with universal shank
Suitable for Black & Decker, Skil, Kress and others
Material suitability Version Material Usable
length
mm
Tooth pitch Corre-
sponds
to Bosch
type
Packing
unit
Order
no.
FOR WOOD, "CLASSIC" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For clean cuts
Milled, Crossed HCS 74 3,0 mm U 111 C 5 6.23945
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 5-50 mm
Ground, Crossed HCS 82 4,0 mm U 144 D 5 6.23944
Hard wood, Soft wood,
Plywood,
Coated boards, 1.5-15 mm,
Especially for curved cuts
Clearance angle ground,
Ta p e r e d
HCS 52 1,3 mm U 1 AO 5 6.23936
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 10-45 mm,
For clean cuts
Clearance angle ground,
Teeth ground
HCS 82 2,5 mm U 101 B 5 6.23943
Hard wood, Soft wood, Chipboards,
Wood-core plywood, Fibre
boards 10-45 mm, For clean cuts
Clearance angle ground,
Teeth ground
HCS 82 4,0 mm U 101 D 5 6.23942

| 205
SAWS
SPECIAL-PURPOSE
MACHINES
SYSTEMATIC
ORGANISATIONGARDEN
WOOD-PROCESSING
TECHNOLOGY
WATER-/PUMP
TECHNOLOGY
WELDING
TECHNOLOGY
COMPRESSED
AIR SYSTEMS
JIG SAW BLADES
Material suitability Version Material Usable
length
mm
Tooth pitch Corre-
sponds
to Bosch
type
Packing
unit
Order
no.
FOR WOOD, "PROFESSIONAL" SERIES, BIM
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 5-50 mm,
For quick cuts
Ground, Crossed BiM 74 4,0 mm U 144 DF 5 6.23904
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 3-30 mm,
Coated boards,
For clean cuts
Clearance angle ground,
Teeth ground
BiM 82 2,5 mm U 101 BF 5 6.23905
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood, Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts
Clearance angle ground,
Teeth ground
HCS 90 2,0-3,0 mm,
progressiv
U 234 X 5 6.23903
FOR WOOD AND METAL, "PIONEER" SERIES
Wood, Wood with nails,
Metal, Non-ferrous metals,
Plastics
Milled, Crossed BiM 107 2,4 - 5,0 mm,
progressiv
U 345 XF 5 6.23906
FOR METAL, "CLASSIC" SERIES
Sheet steel, 0.5-1.5 mm Milled, Crimped HSS 52 0,7 mm U 118 G 5 6.23938
Sheet steel, 1-3 mm Milled, Crimped HSS 52 1,2 mm U 118 A 5 6.23941
Sheet steel, 2.5-6 mm Milled, Crimped HSS 52 2,0 mm U 118 B 5 6.23940
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 52 1,2 mm U 118 AF 5 6.23907
Sheet steel, 2.5-6 mm Milled, Crimped BiM 74 2,0 mm U 118 BF 5 6.23937
FOR METAL, "PIONEER" SERIES
Sheet steel, 1.5-10 mm,
Pipes, Profiles up to 30 mm
Milled, Crossed HSS 74 1,2 - 2,6 mm,
progressiv
U 123 X 5 6.23909
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium, Non-ferrous
metals 3-15 mm, Pipes,
Profiles up to 30 mm
Milled, Crossed HSS 74 3,0 mm U 127 D 5 6.23939

206 |206 |
JIG SAW BLADES
Jig saw blades with Makita shank
Suitable for Makita jigsaws
Material suitability Version Material Usable
length
mm
Tooth
pitch
Corres-
ponds to
Bosch
type
Packing
unit
Order
no.
FOR WOOD, "CLASSIC" SERIES
Soft wood, Plywood, Chipboards,
Wood-core plywood,
Fibre boards 3-15 mm,
Especially for curved cuts
Milled, Crossed HCS 62 2,5 mm MA 119 HO 5 6.23958
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For rough cuts
Milled, Crossed HCS 62 3,0 mm MA 111 C 5 6.23955
FOR WOOD, "PROFESSIONAL" SERIES
Hard wood, Soft wood,
Chipboards, Wood-core plywood,
Fibre boards 4-50 mm,
For quick cuts
Ground, Milled HCS 82 3,0 mm MA 144 CD 5 6.23919
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards, Plastics, 3-30 mm,
For clean cuts
Clearance angle
ground,
Teeth ground
HCS 62 2,7 mm MA 101 BC 5 6.23959
FOR WOOD, "PIONEER" SERIES
Hard wood, Soft wood,
Chipboards,
Wood-core plywood,
Fibre boards 2-65 mm,
For quick cuts, For clean cuts
Clearance angle
ground,
Teeth ground
HCS 92 progressiv,
2,0-3,0 mm
MA 234 X 5 6.23911
FOR WOOD AND METAL, "PIONEER" SERIES
Wood, up to 65 mm,
Wood with nails, Metal sheets,
Pipes, Aluminium,
Plastics, 3-10 mm
Milled, Crossed BiM 102 progressiv,
2,5-5,0 mm
MA 345 XF 5 6.23912
FOR METAL, "CLASSIC" SERIES
Sheet steel, 1-3 mm Milled, Crimped HSS 62 1,0 mm MA 118 A 5 6.23957
Sheet steel, 2.5-6 mm, Milled, Crimped HSS 62 1,8 mm MA 118 B 5 6.23956
FOR METAL, "PROFESSIONAL" SERIES
Sheet steel, 1-3 mm Milled, Crimped BiM 62 1,0 mm MA 118 AF 5 6.23916
Sheet steel, 2.5-6 mm Milled, Crimped BiM 62 1,8 mm MA 118 BF 5 6.23917
FOR METAL, "PIONEER" SERIES
Sheet steel, 1-10 mm, Pipes,
Profiles up to 30 mm
Milled, Crossed HSS 77 progressiv,
1,0-2,6 mm
MA 123 X 5 6.23914
FOR ALUMINIUM AND NON-FERROUS METALS, "EXPERT" SERIES
Aluminium, Non-ferrous
metals 3 -15 mm, Pipes,
Profiles up to 30 mm
Milled, Crossed HSS 62 3,0 mm MA 127 D 5 6.23918