Micro Innovations MP-0118 User manual

Bluetooth Keyboard
For Windows Mobile
User’s Guide
CAUTION: To use this product properly, please read the user's guide before
installation

Welcome
Congratulations on your purchase of the foldable bluetooth keyboard for
iPhone, windows mobile and Symbian systems. The bluetooth keyboard is for
you if you want a fast and easy way to write email, text messages or notes while
you are on the go.With it you can increase your productivity by entering text
quickly and easily while using your phone's display, forget about wires and
cables – the bluetooth wireless technology allows you to connect to a
compatible phone, have it to hand whenever you need it, its foldable and
lightweight design makes it convenient to carry,take advantage of the shortcut
keys to work even more efficiently
Keyboard Layout
In order to make your keyboard as small as possible, the number and punctu-
ation row has been removed. To activate numlock mode, press <Num/
Numlock> once, and it will exit the numlock mode after you press <Num/
Numlock> again. To type a punctuation or function key, hold down <Punct>
or < Function>

Key Color Function
Num/Numlock Red Number Lock
Function Blue Function Commands
Punt Green PunctuationKeys
Opening and closing the keyboard
Hold the folded bluetooth keyboard and press the release buttons located on
both sides of the bluetooth keyboard. The keyboard will open like a book.
Recommend: Press the power switch is highly suggested when you close the
keyboard within 5 seconds
Placing the stylus
A stylus usually is used for the smartphone
or PDA also, so a stylus holder is need.
Setting the stand
Solution 1:
a) Slide the hinge axis into the slot of the half of bluetooth keyboard

b) Open the bluetooth keyboard, slide the hinge axis into the slot of the
other half of bluetooth keyboard, then pull out the support leg on the
back of the stand.
Solution 2:
a) Snap out the support wire at the bottom of the Stand.
b) Pull out the support leg on the back of the Stand and place it on a flat
surface.
c) Place your handheld on the support wire.
Pair button and Indication lamp
1. To connect, press conn.
(or press and hold Cmd
+ Find simultaneously)

2. Indication lamp:
zBlinking quickly:
the keyboard is ready to pair
to a Bluetooth device
zBlinking slowly: battery low
System Requirement
zWindows mobile 5.0 or above
zBluetooth version 2.0
Installation Guide
Step 1. Installing the Battery
zOpen the battery compartment located on top of the keyboard.
zInsert the AAA battery as per the diagram in the upper right of the battery
compartment.
zClose the battery compartment.
Important: Use only 1.5VAAA
alkaline battery, for better efficiency
purpose, a fine brand of the alkaline battery is highly suggested.
Step 2. Pairing your Bluetooth Keyboard with your device
zPress the “Conn.” button for 1-3 seconds, the red LED on the keyboard
should now be periodically flashing.
zThe first step is to enable Bluetooth on your device, do so by tapping 'Start',
then 'Settings', choose the 'Connections' tab.

zSelect the Bluetooth icon to open the Bluetooth Settings menu, choose the
'mode', tap the on-screen button to turn on Bluetooth. Then choose the
'Devices ' button and then 'New Partnership'

zYour new keyboard should be found within a few seconds. Highlight it and
press 'Next'. Just follow the prompts, you'll be asked to make up and enter a
'passcode' (anything you want, it's a one-time only thing and part of the
Bluetooth spec - this is a trivial use for Bluetooth and the security
obviously isn't necessary) on the smartphone keypad. A couple of digits
will do, e.g. '0'. Then enter "0" on the bluetooth keyboard (making sure to
use the correct num/ numlock key to actually get a '0') and press Enter,
From the services available for the foldable bluetooth keyboard, select
'Imput Device'
zClick finish, then you may now type.
Product Specifications
zBluetooth Specification: Version 2.0 Class 2
zRange of Frequency: 2.4GHz Spectrum
zOperating Voltage: 1.2 ~1.6Vdc ( powered by 1 AAA batterie )

zOperation Current: < 8mA
zStandby Current: 1.2mA
zSleep Current: < 200uA
zClose the keyboard: < 0.1uA
zTransmit Range: up to 10 meters
zStorage Temperature: -40 ~ +125 degree
zDimensions: 117mm(L) x 80.8mm（W）x 14mm（H）
zWeight: 103g+/-2g
Troubleshooting
If you are unable to connect your Bluetooth Keyboard to your smartphone,
or the keyboard work unconventionally, please try the following:
zPlease use a new and a fine brand alkaline battery if the handheld can not
find MP-0118.
zThe keyboard must repeat the handheld’s passkey and press enter, or else
you will pair it fail.
zPlease press the power switch a time within 5 seconds when you close the
keyboard, if your computer input a key or some keys after close the
keyboard
zMake sure bluetooth is already turned on
zMake sure the driver is correct
zEnsure the Bluetooth Keyboard is within a 10 meters range of your device
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
Following two conditions:
1. This device may not cause harmful interference.

2. This device must accept any interference received., including interference
that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Dispose of batteries according to local regulations. Do not dispose as
household waste