Microchip Technology PRO MATE II User manual

PRO MATE®II
DEVICE SUPORT
1999 Microchip Technology Inc. DS30243H
Informationcontainedin this publication regarding deviceapplicationsandthe like isintended byway ofsuggestion
only. No representation or warranty is given and noliabilityisassumedbyMicrochip TechnologyIncorporated with
respectto the accuracyoruse of suchinformation.Useof Microchip’sproductsas critical components in lifesupport
systemsisnot authorized except withexpresswritten approval byMicrochip.
 1999MicrochipTechnology Incorporated. All rights reserved.
The Microchip logo and name,PIC,PICmicro, PICMASTER, PRO MATE, and KEELEOQare registered rademarks of
MicrochipTechnology Incorporated inthe U.S.A. and other countries. MPLAB, and
Smart Serial are trademarks of
MicrochipTechnology intheU.S.A.andother countries.
All product/companytrademarksmentionedhereinarethe property of theirrespectivecompanies.

PRO MATE®II Device Support
DS30243H 1999 Microchip Technology Inc.

1999 Microchip Technology Inc. DS30243G1-page iii
PRO MATE®II DEVICE SUPPORT
Table of Contents
General Information
Introduction ..........................................................................................1
Highlights .............................................................................................1
About This Guide .................................................................................1
Recommended Reading ......................................................................3
The Microchip Internet Web Site ..........................................................4
Development Systems Customer Notification Service .........................5
Customer Support ................................................................................7
Chapter 1. Socket Modules
1.1 Introduction ................................................................................9
1.2 Highlights ...................................................................................9
1.3 Currently Supported Devices and Socket Modules ...................9
1.4 Socket Life Expectancy and Cleaning Procedures ..................13
Chapter 2. Programming Devices with Calibration
2.1 Introduction ..............................................................................15
2.2 Highlights .................................................................................15
2.3 Programmer Dialogs ................................................................16
2.4 Calibration Windows ................................................................17
Chapter 3. Programming KEELOQ®Devices
3.1 Introduction ..............................................................................19
3.2 Highlights .................................................................................19
3.3 Programming Overview ...........................................................19
3.4 Key Generation ........................................................................21
3.5 Manufacturer’s Code ...............................................................22
3.6 HCS200 Options ......................................................................24
3.7 HCS201 Options ......................................................................25
3.8 HCS300/301/320 Options ........................................................26

PRO MATE®II Device Support
DS30243G1-page iv 1999 Microchip Technology Inc.
3.9 HCS360 Options ......................................................................28
3.10 HCS361 Options ......................................................................30
3.11 HCS410 Options ......................................................................32
3.12 HCS412 Options ......................................................................35
3.13 HCS512 Options ......................................................................38
Chapter 4. Programming Memory Devices
4.1 Introduction ..............................................................................39
4.2 Highlights .................................................................................39
4.3 Programming Overview – Memory Devices .............................39
Index..........................................................................................................41
Worldwide Sales and Service..................................................................44

1999 Microchip Technology Inc. DS30243G1-page 1
PRO MATE®II DEVICE SUPPORT
General Information
Introduction
This chapter contains general information that will be useful to know before
using this document.
Highlights
The information you will garner from this chapter:
• About this Guide
• Recommended Reading
• The Microchip Internet Website
• Development Systems Customer Notification Service
• Customer Support
About This Guide
Document Layout
This document describes how to use PRO MATE II as a development tool to
program firmware to a target device. The manual layout is as follows:
•Chapter 1: Socket Modules – Lists the part numbers for the
socket modules that support each device and discusses the life
expectancy and cleaning procedures for the different socket types.
•Chapter 2: Programming Devices with Calibration – How to program
PIC12CXXX, PIC14C000, and PIC16C505 devices.
•Chapter 3: Programming KEELOQ®Devices – How to program
KEELOQ devices.
•Chapter 4: Programming Memory Devices – How to program mem-
ory devices.
•Index – Cross-reference listing of terms, features, and sections of this
document.
•Worldwide Sales and Service – A listing of Microchip sales and
service locations, and telephone numbers worldwide.

PRO MATE®II Device Support
DS30243G1-page 2 1999 Microchip Technology Inc.
Conventions Used in this Guide
This manual uses the following documentation conventions:
Updates
All documentation becomes dated, and this device specification is no
exception. Since MPLAB, PRO MATE II and other Microchip tools are
constantly evolving to meet customer needs, some MPLAB dialogs and/or
tool descriptions may differ from those in this document. Please refer to our
web site to obtain the latest documentation available.
Documentation Conventions
Description Represents Examples
Angle Brackets: < > Delimiters for special keys. <TAB>, <ESC>
Italic characters Referenced books.
MPLAB™ User’s
Guide
Courier Font User entered code or sample
code. #define ENIGMA
Underlined, Italics Text
with Right Arrow Defines a menu selection from the menu bar.
File > Save
0xnnn 0xnnn represents a hexadeci-
mal number where n is a hexa-
decimal digit.
0xFFFF, 0x007A
In-text Bold Characters Designates a button. OK, Cancel

1999 Microchip Technology Inc. DS30243G1-page 3
General Information
Recommended Reading
This document describes PRO MATE II socket modules and device-specific
programming options. For more information on using the PRO MATE II and
general programming procedures, please refer to the
PRO MATE II User’s
Guide
. For the latest PRO MATE II information, please refer to the
README.PRO file.
README.PRO
For the latest information on PRO MATE II, read the README.PRO file
(ASCII text file) included with the PRO MATE II software. This README file
contains update information that may not be included in this document.
PRO MATE II User’s Guide (DS30028)
This user’s guide describes how to set up and use PRO MATE II. General
programming procedures are detailed for PICmicro®, KEELOQ and memory
devices.
MPLAB User’s Guide (DS51025)
Comprehensive guide that describes installation and features of Microchip’s
MPLAB Integrated Development Environment, as well as the editor and
simulator functions in the MPLAB environment.
Technical Library CD-ROM (DS00161)
This CD-ROM contains comprehensive data sheets for Microchip PICmicro
devices available at the time of print. To obtain this disk, contact the nearest
Microchip Sales and Service location (see back page) or download individual
data sheet files from the Microchip website (http://www.microchip.com).
Embedded Control Handbook Vol.1 & 2 (DS00092 & DS00167)
These handbooks contain a wealth of information about microcontroller
applications. To obtain these documents, contact the nearest Microchip Sales
and Service location (see back page).
The application notes described in these manuals are also obtainable from
Microchip Sales and Service locations or from the Microchip web site (http://
www.microchip.com).
Microsoft Windows Manuals
Microchip software documentation assumes that you are familiar with the
Microsoft Windows operating system. Many excellent references exist for this
software program, and should be consulted for general operation of Windows.

PRO MATE®II Device Support
DS30243G1-page 4 1999 Microchip Technology Inc.
The Microchip Internet Web Site
Microchip provides on-line support on the Microchip World Wide Web (WWW)
site.
The web site is used by Microchip as a means to make files and information
easily available to customers. To view the site, the user must have access to
the Internet and a web browser, such as Netscape®Communicator or
Microsoft®Internet Explorer®. Files are also available for FTP download from
our FTP site.
Connecting to the Microchip Internet Web Site
The Microchip web site is available by using your favorite Internet browser
to attach to: http://www.microchip.com
The file transfer site is available by using an FTP program/client to connect to:
ftp://ftp.microchip.com
The web site and file transfer site provide a variety of services. Users may
download files for the latest Development Tools, Data Sheets, Application
Notes, User’s Guides, Articles, and Sample Programs. A variety of Microchip
specific business information is also available, including listings of Microchip
sales offices, distributors, and factory representatives. Other data available for
consideration is:
• Latest Microchip Press Releases
• Technical Support Section with Frequently Asked Questions
• Design Tips
• Device Errata
•JobPostings
• Microchip Consultant Program Member Listing
• Links to other useful web sites related to Microchip Products
• Conferences for products, Development Systems, technical information,
and more
• Listing of seminars and events

1999 Microchip Technology Inc. DS30243G1-page 5
General Information
Development Systems Customer Notification Service
Microchip started the customer notification service to help our customers
keep current on Microchip products with the least amount of effort. Once you
subscribe to one of our list servers, you will receive email notification
whenever we change, update, revise or have errata related to that product
family or development tool. See the Microchip WWW page for other Microchip
list servers.
The Development Systems list names are:
• Compilers
• Emulators
• Programmers
• MPLAB
• Otools.
Once you have determined the names of the lists that you are interested in,
you can subscribe by sending a message to:
[email protected]
with the following as the body:
subscribe <listname> yourname
Here is an example:
subscribe programmers John Doe
To UNSUBSCRIBE from these lists, send a message to:
[email protected]
with the following as the body:
unsubscribe <listname> yourname
Here is an example:
unsubscribe programmers John Doe
The following sections provide descriptions of the available Development
Systems lists.
Compilers
The latest information on Microchip C compilers, Linkers and Assemblers.
These include MPLAB-C17, MPLAB-C18, MPLINK, MPASM as well as the
Librarian, MPLIB for MPLINK.
To SUBSCRIBE to this list, send a message to:
[email protected]
with the following as the body:
subscribe compilers yourname

PRO MATE®II Device Support
DS30243G1-page 6 1999 Microchip Technology Inc.
Emulators
The latest information on Microchip In-Circuit Emulators. These include
MPLAB-ICE and PICMASTER®.
To SUBSCRIBE to this list, send a message to:
[email protected]
with the following as the body:
subscribe emulators yourname
Programmers
The latest information on Microchip PICmicro device programmers. These
include PRO MATE II and PICSTART Plus.
To SUBSCRIBE to this list, send a message to:
[email protected]
with the following as the body:
subscribe programmers yourname
MPLAB
The latest information on Microchip MPLAB, the Windows Integrated
Development Environment for development systems tools. This list is focused
on MPLAB, MPLAB-SIM, MPLAB’s Project Manager and general editing and
debugging features. For specific information on MPLAB compilers, linkers and
assemblers, subscribe to the COMPILERS list. For specific information on
MPLAB emulators, subscribe to the EMULATORS list. For specific information
on MPLAB device programmers, please subscribe to the PROGRAMMERS
list.
To SUBSCRIBE to this list, send a message to:
[email protected]
with the following as the body:
subscribe mplab yourname
Otools
The latest information on other development system tools provided by
Microchip. For specific information on MPLAB and its integrated tools refer to
the other mail lists.
To SUBSCRIBE to this list, send a message to:
[email protected]
with the following as the body:
subscribe otools yourname