Microedge Instruments DSP-2C User manual

©2010-2021 Microedge Instruments Inc. Rev 2.0
Quick Start
for Site USB Device Server Pro
DSP-2C

1
Please refer to the instructions of SiteView, SiteView-SDK, SiteView-Web and Pluto for
basic communication with a USB Device Server.
1. Unbox DSP-2C
DSP-2C comes with
1. 5VDC Power Adapter
2. USB Cable
3. Ethernet Cable
Please
Connect DSP-2C to the 5VDC power adapter via the enclosed USB cable.
Connect DSP-2C to your local network with the enclosed Ethernet cable.
Connect data loggers to the USB ports of DSP-2C
Wait for TWO minutes. This will allow the system to recognize the plugged
data logger(s).
2. Access Device’s Admin Portal
Use a QR Scanner to scan the QR Code on the label and find out the Serial Number of
the unit.
Open a browser and enter
http:// MEIUSBServerSBC-[Serial Number].local:8864
For example, if the unit’s serial number is 000000007ae513f6, you would enter:
http://MEIUSBServerSBC-000000007ae513f6.local:8864.
Enter ‘admin’for both the Username and
the Password.
The IP address of the unit is displayed as below:

2
3. Change Access Settings from Admin Portal
By default, SiteView will use the default port number of 5678 and password of 12345 to
communicate with DSP-2C.
Scroll down to ‘USB Device Server Properties’ panel and change any of the below
settings.
If you have changed the above settings for a DSP-2C and you want to communicate with
it from SiteView, SiteView-SDK, SiteView-Web or Pluto, you must use the same settings
when you create a connection for it.
4. Communicate with Remote Data Logger
Launch SiteView software in PC side and click
“USB Server” tab:
Click ‘Add connection’ button:
In the pop-up dialog, enter the description of the
connection and the IP address you retrieved from
preceding step. You may keep other fields default if
you have not changed the settings from the
preceding steps.
Click ‘OK’ button to add the connection.
Double click the new created connection;
the data logger icon will be listed under it:
Double click the logger icon to show the status. Now you can download data, view real-
time readings and more

Microedge Instruments Inc.
404 –1688 152nd Street
Surrey, BC
Canada, V4A 4N2
Toll Free: 1.877.352.9158,
Fax: [phone]
www.microedgeinstruments.com
[e-mail]