Microzone MC8RE-V2 User manual

www.microzone.cn
DIGITAL PROPORTIONAL R/CSYSTEM
2.4GHz
FHSS
Please read the instruction manual before use
PRODUCT MANUAL
MC8RE-V2

FUNCTIONAL PARSING
DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
SPECIFICATION PARAMETERS
1 external voltage input
External
voltage
input
(S)signal
(+)positive
electrode
(-)negative
electrode
Contact frequency alignment
After the receiver is powered
on, press the touch button to
turn on the power switch of
the remote control, and the
frequency matching is
successful
7 PWM signal
External antenna
(-)negative
electrode
1 SBUS signal
Frequency range
Receiver supply voltage
SBUS signal
Frequency pairing mode
Recovery performance
Control range
Antenna type
Antenna length
Runaway protection settings
Applications
Weight
Size
Color
Model
Channel output
Remote control support
Voltage return
MC8RE-V2
Teal transparent
7 PWM signals,1 SBUS signals,1 external voltage input
2401MHz-2478MHz
DC:4.5-6V
Fast signal recovery
Contact to frequency
>1000m
150mm
External dual antenna
10g
46*25*1（4 mm）
Fixed wing/Multi-axis/Car/Boat
Support
C7-MINI/8B-MINI/Classic-10
Support
Support

DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
Power on:
Connect the positive and negative terminals in to the power supply to turn it on.
Indicator Description:
Slow blinking: no signal;
Indicator light is always on: signal reception is normal;
Fast blinking: frequency pairing is in progress.
Fail-safe:
When the receiver accidentally loses signal, it will automatically switch to runaway state, when runaway, the
receiver outputs 1500us on channel 1/2/4, 900us on channel 3, and the other channels remain unchanged.
Failsafe switching:
This function is only available for products after 2023, and this operation will change the runaway protection
value of channel 3 to 1500us;
Turn off the receiver, short-circuit channels 5 and 6 with a wire, turn off the wire after the How to Operate:
receiver is powered on for three seconds, and restart the receiver.
Frequency pairing:
After the remote control is turned off and the receiver is powered on, press the frequency control button on
the receiver, and the indicator light will flash quickly, the receiver will enter the frequency control mode, as
shown in the following figure, then, turn on the remote control, and the receiver indicator light will turn on,
the receiver will receive the signal normally.
PARTICULAR
FM button

详细说明
DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
PWM signal:
High level is 3.3V, 14ms a cycle, output pulse width is 1000-2000us when not mixing, and 880-2120 when
mixing or trimming bias, as shown below.
Default runaway protection and customized runaway protection switching:
Factory default runaway protection value, that is, the third channel runaway protection value of 900, other
channels 1500; long press the frequency pair button on the receiver for more than 15 seconds, the receiver
indicator light flashes, can switch to user-defined runaway protection.
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
14ms
1000
1150
1300
1450
1750
1600
Ch7
2000
FM button

DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
2.4GHz
FHSS
SBUS signal:
High level 3.3V,100k baud rate, 8 data bits (9 bits to be selected in stm32), even parity (EVEN), 2 stop bits,
starting at 0x0F and ending at 0x00, 25 bytes in total, one frame of data every 14ms;
[0x0F] [data0] [data1] [data2] [data3] ... [data10] [flag] [0x00];arranged as follows:
Corresponding to 16 channels (ch1-ch16), each channel 11bit, channel data value range data1.... .data22:
is 200-1800, docking SBUS signal needs to invert the level in hardware, software inversion is invalid,
inversion circuit is as follows.
VCC3V3_MCU
RXD
Q1
1K
RC_SBUS B
C
E
GND
10K
SBUS
Receivers
MCU
G
N
D
T R
X X
D D
VCC

DIGITAL PROPORTIONAL R/CSYSTEM
www.microzone.cn
MATTERS NEEDING ATTENTION
Beforestartingtousetheremotecontrol,carefullyreadthefollowingprecautions!
2. Please do not use it in harsh weather conditions such as evenings, thunderstorms, snows, low energy levels, etc.
A. Near the mobile phone signal transmission tower
B. Near high-voltage power lines and communication broadcasting antennas
C. Near the Military Radar Launch Tower
D. The complexity of wireless communication and the commercial path of mobile activities
E. Navigation domain
5. Please do not use this product after feeling tired, uncomfortable, drunk, or excited about drugs, otherwise it will
cause serious injury to oneself or others The value of is.
6. The 2.4G line band is completely different from the low-frequency line radio band previously used, Please ensure
that the model product is within your line of sight when using it Obstacles inside can block the signal from the power
line, causing the remote control and model to lose control.
7. Before using it, it is necessary to ensure that the remote control and model are installed correctly, and that all
steering gear actions and controls are in the same direction, otherwise it may cause damage to the model Severe
damage to the engine.
8. When the remote control distance continues to be too far, there is a possibility of losing control, Please shorten the
control distance appropriately; The battery voltage of the remote control is insufficient, transmitting The signal from the
machine can cause loss of control; So when the remote control "POWER" flashes and there is an alarm, please
replace the battery as soon as possible.
9. When stopping the remote control, be sure to cut off the power supply of the receiver and then turn off the remote
control; If the power to the remote control is turned off first, the receiver will still be on Operation may cause the model
to lose control or the engine to continue working, leading to serious accidents.
10.Improper use of the remote control may cause serious injury or even death to the operator or others; To ensure the
safety of you, others, and equipment, please be careful Read this guide and follow the instructions.
11.The remote control and receiver required for our company's 2.4G wireless transmission system are used in pairs,
while other company products cannot be connected to our company's products The product is of great value.
1. This product is not a toy and is not suitable for children under the age of 12, Adults should keep this product out of
reach of children and keep it out of reach of children Be careful when operating this product in the field.
2.4GHz
FHSS
3. Do not use the remote control in snowy or watery places, if rainwater enters the remote control, the circuit will be
short-circuited and cannot be used.
4.Signal interference may cause the remote control to go out of control,places where interference affects more than
others are as follows: