Middle Atlantic Products R412 Series User manual

In s t r u c t io n S h e e t
------- R4 12 Series -------
Fo u r P o s t O p e n Fr a m e Ra c k
C (V l) us
LISTE
THANK YOU
Thank you for purchasing the R412 eries Open Frame Rack. Please read these instructions
thoroughly before installing/assembling this product.
PRODUCT FEATURE
- Four post design provides unrestricted heat flow and access to equipment
- Four-point mounting for deeper, heavier components
- Use with optional VCD eries Vertical Cable Duct for clean, reliable cable management
- Ideal for mounting networking equipment, routers, switches and more
- Optional side panels and additional rail kits available
WEIGHT RATING
- 800 lbs. UL listed load capacity
Middle Atlantic Products
I-00234 Rev B

BOTTOM BRACKET
BA E
FRONT BRACKET
QUARING PANEL
QTY
2
QTY
2
QTY
2
QTY
2
PART
D
PART
E
PART
F
PART
K
HARDWARE KIT (PART # 91-00176)
IDE BRACKET CREW QTY PART
25 G TOP/BOTTOM NUT QTY PART
12 J
TOP/BOTTOM BOLT QTY
12 PART
H
HP-24 (12-24 RACK CREW ) ^
FOR EQUIPMENT IN TALLATION QTY
100
Page 2

S»DE assemBLy bottom
Tools Required For These teps: #2 Phillips Driver
NOTE : Bottom of Channels indicated by two mounting holes.
Top of Channels indicated by one mounting hole. FIGURE A
When installing brackets, see FIGURE B for teardrop orientation.
Q
FIGURE A
TOP
1) Align Top Bracket (B) with top of Channel (A). Loosely tighten Bracket crews (G). FIGURE C
2) Align Middle Bracket (C) with the channels marked holes.
Loosely tighten Bracket crews (G). FIGURE D
NOTE: 45 space rack uses the two outer holes, 38 and 51 space racks use the two inner holes on the
Center ide Bracket.
3) Align Bottom Bracket (D) with the bottom of the channel.
Loosely tighten Bracket crews (G). FIGURE E
4) Repeat steps 1 - 3 to install a second Channel (A).
5) Fully tighten screws in all locations.
6) Repeat steps 1- 5 for the second side assembly.
EE FIGURE C
EE FIGURE D
EE FIGURE E
0
IK
FIGURE C
$
FIGURE D
G
G
G
FIGURE E
FIGURE B
Page 3

A EMBLY (TOP AND BOTTOM FACING OUTWARD)
Tools Required In This tep: 9/16" Wrench
TIP: Installing the Base facing outward will increase rack stability.
1) Install Front Brackets (F) and Bases (E) with supplied hardware (H & J) as shown.
Loosely tighten hardware.
2) Install quaring Panels (K).
EE FIGURE F
EE FIGURE G
3) tand rack upright, square the assembly
and fully tighten hardware. Remove
the quaring Panels. (FIGURE H)
FIGURE G
FIGURE H
Page 4

WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the R412 eries Rack to be free from
defects in material or workmanship under normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return
of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the
products purchased, or any part or parts thereof, which the Company has determined to be
defective after inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THI WARRANTY I IN LIEU OF ALL OTHER WARRANTIE OF ANY KIND, EITHER EXPRE ED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIE OF MERCHANTABILITY AND
FITNE FOR A PARTICULAR PURPO E.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT HALL THE COMPANY
BE LIABLE FOR ANY PECIAL, INCIDENTAL, INDIRECT, OR CON EQUENTIAL DAMAGE
WHAT OEVER (INCLUDING, WITHOUT LIMITATION, DAMAGE FOR LO OF BU INE PROFIT ,
BU INE INTERRUPTION OR ANY OTHER PECUNIARY LO ) ARI ING OUT OF THE U E OF THE
PRODUCT PURCHA ED, EVEN IF THE COMPANY HA BEEN ADVI ED OF THE PO IBILITY OF
UCH DAMAGE . THE COMPANY' LIABILITY TO THE PURCHA ER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, HALL IN NO EVENT EXCEED THE PURCHA E PRICE OF THE PRODUCT
PAID TO THE COMPANY
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone]
International Voice [phone] - Fax [phone]
middleatlantic.com - [e-mail]
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone]
middleatlantic.ca - [e-mail]
Factory Distribution
U A: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an I O 9001 Registered Company.
RoHS
Page 6 30% Recycled Paper