Middle Atlantic Space MK Series User manual

Part #
MK-1945-24
instruction #
I-00153
Rev.
B 5-05-05
Instruction # Rev.
B
I-00153
Instruction # Date:
I-00153
Rev.
B5/05/05
Part #
MK-1945-24
Page:
1 of 4
Assembly:
full
middleatlantic.com
Voice 973-839-1011 Fax [phone]
PART
LETTER
PART
NUMBER DESCRIPTION QTY.
A SAN NUT, # 8-32 ACORN 40
B 3/8AN NUT, 3/8-16 ACORN 28
C 92-012 NUT, 3/8-16 FLANGE 28
D 92-011 BOLT, 3/8-16,HEX 8
MK-1945-24
Assembly Instructions
Tools Needed:
 - 9/16" Wrench or socket
 - 5/8" Wrench or socket
 - 5/16" Wrench or socket
E 500-00166 HOLE PLUG, NYLON,
1.75", BLACK
16
F CABLE MANAGEMENT
RING
40MK Series
Cable Ring
G CABLE GROMMET RING,
4 PIECES
1
GK4
PART
IMAGE
PATENT PENDING

Page:
2 of 4
Assembly:
full
C
B
1) Assemble sides to bottom as shown
NOTE: Sides are the same and can be
  assembled in either direction
2) Assemble sides to top as shown
CB

Page:
3 of 4
Assembly:
full
3)Assemble ladder bracket as shown
4)Install hole plug and cable ring as shown
5)Install GK4 grommet rings where cable
 may pass-through, as shown
NOTE: 4 pieces GK4 grommet rings included. Order
  Middle Atlantic Products part # GK4 for more,
  includes 4 pieces grommet rings
D
C
B
E
F
G

Page:
4 of 4
Assembly:
full
To gang racks, install hardware supplied in 8 locations shown
To install grommet rings, pull open flange and insert bottom edge into cable pass-through holes.
Firmly press grommet into position, working your way around until fully inserted
SIDE VIEW
Flange pulled open for
installation FIGURE A
BC
D
Inside of
rack frame
G
Install ganging hardware in 8 circled locations