Midea US-OSK103 User manual

USER MANUAL OF SMART KIT
IMPORTANT NOTE:
Read the manual carefully before installing or
connecting your Smart kit(Wireless module). Make
sure to save this manual for future reference.

CONTENTS
DECLARATION OF CONFORMITY
SPECIFICATION...............................................
PRECAUTIONS ...............................................
DOWNLOAD AND INSTALL APP....................
INSTALL THE SMART KIT...............................
USER REGISTRATION ...................................
NETWORK CONFIGURATION.........................
HOW TO USE APP............................................
SPECIAL FUNCTIONS......................................
1
2
3
4
5
6
7
8
1
1
2
3
4
5
16
18
Hereby, we declare that this AC is in compliance
with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
A copy of the full DoC is attached.

1
1
SPECIFICATION
Model: US-OSK103
Standard: IEEE 802. 11b/g/n
Antenna Type: Printed PCB Antenna
Frequency : WLAN 2400~2483.5 MHz
Operation Temperature:0 C~45 C/32 F~113 F
Operation Humidity: 10%~85%
Power Input: DC 5V/300mA
Maximum Transmitted Power: 19.8dBm Max
Please keep you APP up to date with the latest version.
Due to special situation may be occurred, we explicitly
claims below: Not all of the Android and i OS system
are compatible with APP. We will not be responsible
for any issue as a result of the incompatibility.
W
Cautions
ireless safety strategy
Smart kit only support WPA-PSK/WPA2-PSK
encryption and none encryption .
WPA-PSK/WPA2-PSK encryption is recommended.
Due to different network situation, control process
may return time-out sometimes. If this situation
occurs, the display between board and App may not
be the same, please do not feel confused.
Smart Phone camera needs to be 5 million pixels or
above to make sure scan QR code well.
2PRECAUTIONS
Applicable system: iOS, Android.
(Suggest: iOS 8.0 or above, Android 4.0 or above)

2
CAUTION: The following QR Code is only available
for downloading APP. It is totally different with
the QR code packed with SMART KIT.
Due to different network situation, sometimes,
request time-out could happen, thus, it is necessary
to do network configuration again.
Please Check The Service Website For More information.
3DOWNLOAD AND INSTALL APP
Android iOS
Android Phone users: scan Android QR code or go to
google play, search ‘NetHome Plus” app and download it.
iOS users: scan iOS QR code or go to APP Store,
search ‘NetHome Plus” app and download it.
The APP system is subject to update without prior notice for
product function improvement. The actual network configuration
process may be slightly different from the manual, the actual
process shall prevail.

3
WARNING
4
INSTALL THE SMART KIT(wireless module)
Remove the protective cap of the smart kit
(wireless module)
Open the front panel and insert the smart kit
(wireless module) into the reserved interface.
Insert
Attach the QR code packed with Smart kit
(wireless module) to the side panel of the
machine, ensure it is convenience to be scanned
by the mobile phone. Alternatively, user can take
picture of the QR Code and save in into their
own phone.
1
2
3
:This interface is only compatible with
SMART KIT(wireless module) provided by the
manufacturer.

4
12
Click "Login " Enter your email address
and password, and then
click " "Registration
VI5
0
Crea Acc
Fo
rgot password?
5USER REGISTRATION
Please ensure your mobile device is connected to
Wi-Fi router. Also, the Wireless router has already
connected to Internet before doing user registration and
network configuration.
It is better to log in your email box and active your
registration account by clicking link in case you forget
the password. You can log in with the third party accounts.

5
6NETWORK CONFIGURATION
Cautions
Kindly reminder:
Using Android device to do network configuration
It is necessary to forget any other around network and
make sure the Android or iOS device just connect to
the Wireless network you want to configure.
Make sure the Android or iOS device Wireless function
works well and can be connected back to your original
Wireless network automatically.
connect to the Wireless network which you want to use.
Also, you need to forget other irrelevant Wireless network
in case it influences your configuration process.
press the “ LED DISPLAY” or “DO NOT DISTURB”
button seven times in 10 seconds.
When the AC displays “AP”, it means that the AC
wireless has already entered into “AP” Mode.
User must finish all the steps in 8 minutes after powering on
AC, otherwise you need to power on it again.
1
2
2
3
4
Make sure your mobile device has already been
Disconnect the power supply of AC.
Connect the power supply of AC, and continuously
Some type of AC do not need the step to be in AP
mode

6
5Press “ + Add Device ” 6Select the appliance you
are setting up

7
7Follow the above steps to enter “AP” mode.

8
8Choose the network
configuration method.
9Choose the “ Scan the
QR code ” method.

9
9 Or choose the “Manual
Setup” method. Please enter password
10

10
12
Network configuration is
successful
11
Configuration Success,
you can see the device
on the list.
WLAN
WLAN
WLAN

11
Using iOS device to do network configuration
5Press “ + Add Device ” 6Select the appliance you
are setting up
1
2
3
4
Make sure your mobile device has already been
connected to the Wireless network which you want to
use. Also, you need to forget other irrelevant Wireless
network in case it influences your configuration process.
Disconnect the power supply of AC(some units).
Connect the power supply of AC, and continuously
press the “LED DISPLAY” button or “DO NOT
DISTURB” button seven times in 10 seconds.
When the AC displays “AP” , it means that the AC
Wireless has already entered into “AP” Mode.

12
7Follow the above steps to enter “AP” mode.

13
8 Connect to the Wireless
network.
Please enter password
9

14
11
Network configuration is
successful
10
Configuration Success,
you can see the device
on the list.
WLAN
WLAN
WLAN

15
NOTE:
When finishing network configuration, APP will
display success cue words on the screen.
Due to different internet environment, it is possible
that the device status still display “offline” . If this
situation occurs, it is necessary to pull and refresh
the device list on the APP and make sure the device
status become “online” . Alternatively, user can
turn off the AC power and turn on it again, the device
status will become “online” after few minutes.

16
7HOW TO USE APP
1Click "Login "
SIM!
082
cc
2Choose the air conditioner.
Please ensure both your mobile device and air
conditioner are connected to the Internet before
using app to control the air conditioner via internet,
please follow the next steps:

17
3Thus, user can control
air conditioners on/off
status, operation mode,
temperature, fan speed
and so on.
NOTE:
Not all the function of the APP is available on air
conditioner. For example: ECO, Turbo, Swing function,
please check the user manual to find more information.

18
8SPECIAL FUNCTIONS
Including: Timer on, Timer off, 8 C Heat, Sleep,
Check.
NOTE: If the air conditioner do not support the above
function, the function will be hided from the function
list.
Timer on/Timer off
Weekly, user can make an appointment to turn on or
off AC on specific time. User also can choose
circulation to keep the AC under schedule control
every week.