Midi Solutions Quadra Thru User manual

Quadra Thru
OPERATING INSTRUCTIONS
MIDI Solutions

MIDI Solutions Quadra Thru Operating Instructions M415-100
2012 MIDI Solutions Inc. All rights reserved.
MIDI Solutions Inc.
PO Box 3010
Vancouver, BC Canada
V6B 3X5
www.midisolutions.com

Thank you for purchasing the MIDI Solutions Quadra Thru.
The MIDI Solutions Quadra Thru provides four MIDI Thru outputs from one MIDI input, allowing additional MIDI
outputs to be added at any point in the MIDI chain. Active circuitry cleans up any skewing of the data bits that has
occurred at the input, resulting in accurate output signals. The MIDI Solutions Quadra Thru is MIDI-powered and
requires no batteries or power supply to operate.
INTRODUCTION
Connect the MIDI Out or Thru of the sending MIDI device to the MIDI of the MIDI Solutions Quadra Thru. Connect
, , , and of the MIDI Solutions Quadra Thru to the MIDI Ins of the receiving MIDI devices. It
is recommended that the number of MIDI Solutions products powered from a single MIDI Out or Thru be limited to
four.
In
Thru1 Thru2 Thru3 Thru4
The Quadra Thru's MIDI Indicator LED will light as soon as the sending device is turned on, and flashes whenever MIDI data
passes through the unit. All MIDI messages appearing at the MIDI input are sent to Thru1, Thru2, Thru3, and Thru4.
CONNECTIONS
OPERATION
3
MIDI In
Receiving Device #2
MIDI In
Receiving Device #3
Sending Device
MIDI Out or Thru
MIDI In
Receiving Device #1
MIDI In
Receiving Device #4
MIDI Solutions
TM
Made in Canada
MIDI
Thru1
In
Thru4Thru3
Quadra Thru
Thru2 MIDI Indicator LED

4
MIDI Solutions Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from
date of purchase. This warranty is void if the product has been damaged by accident, misuse, alteration, unauthorized repairs
or other causes not arising out of defects in material or workmanship. Under no circumstances will MIDI Solutions be liable for
any loss of profits, benefits, time, interrupted operation, commercial loss, or consequential damages arising out of the use or
inability to use the product. MIDI Solutions specifically disclaims any implied warranties of merchantability and fitness for a
particular purpose. If the product requires service, a Return Merchandise Authorization (RMA) number must be obtained from
MIDI Solutions and the product must be shipped prepaid to a specified Service Center. MIDI Solutions will repair or replace the
product at our discretion and will pay return shipping fees. The customer is responsible for any damage or loss sustained
during shipment in any direction.
WARRANTY