Midland Radio Corporation AVP3K User manual

AVP3K Owner's Guide
Installing the Battery Packs:
1. With the backofthe radio facing you, removethe belt clip (see
diagram below) for easy access, then remove the battery
compartment cover by pressing down on the top center and
slidingitdown
from the radio.
2. Insertthe Midland Ni MH batterypack intobatterycompartment.
3. Replacethe battery coverby sliding itupon the radio. Replace
the belt
clip, making sure it locks into place.
I .
Press here and
push down toopen

Charging the Battery Packs:
1. Place the rechargeable batterypacks intothe radios, making sure to
match up the batterycontacts inthe radios.
2. Connectthe ACadapter intoan AC wall outlet.
3. Insertthe ACadapter plug(or optional DCCigarette Lighter adapter if
chargingin
vehicle) intothe desktopchargerjack.
4. Place the radios intothe desktop charger slots and note that the LED
indicator will lightup, indicating charging function.
• Onlyuse the Midland NiMH batterypack.
• Do not attempt to charge alkalinebatteries or any batteries or
batterypacks otherthan the one indicated inthe manual. This
maycause leakageand damage to the radio.
• For long-term storage ofthe radio, turnthe radio OFFand
remove the batteries from the radio
Initial charge timeis 24 hours with a charge timeof8-12 hours thereafter.
For maximum battery life, we recommendchargingthe battery pack
when the lowbattery icondisplayson yourradio.Removethe radios
fromthe charger when the charge timeexpires.
Midland RadioCorporation
5900 Parretta Drive
Kansas City, MO 64120
www.midlandradio.com