MIDTE DVB350HTS User manual

Connect the antenna to media player and power on media player, A main menu will display on the
TV, Please select “DVT” icon to enter the DTV mode.
Press “setup” key on the remote control to enter “TV channal Scanning” menu, then the window
will pop up three options to set searching options.

The first option is “Auto search”, the media player will search the TV channels automatically.
Before you use “Auto search”, please select “Local” menu to select a country which you want to
search.
The second option is “manual search” ,You need to input the corresponding Frequency manually.
Then the media player will search the TV channels following the frequency you setted.
After finishing program searching, press “TV-CH” key to view program list.use “up/down” key to
select program channels.

At the bottom of screen, you can select “EPG”option to get corresponding program information,
Select “info”option to get channel information, Select “Fav” option to set this channel to the
favourite program list,then you can press “favourite” key to switch channel following the favourite
program list. select “lock” option to lock this channel ,then you can input password 8823 to
unlock.
Remark: the default password is 8823 and it can’t be changed.
After finishing program searching, press “audio” key to view program list.use “up/down” key to
select program channels.
After selecting a channel and play programs,press “EPG/TTX” key will display program
information and playing state.press up/down/left/right key can switch display information.
EPG list

TTX list
After selecting a channel and play programs,press “Subtitle” key will open or close subtitle title.
When a program is playing, press “REC” key will record and store this program to the first FAT32
partition.there will be a icon blinking at the top left corner .

When a program is playing,press “mark” key will enter “timer rec list” menu, according to this list
can view all the information for recording.Select “edit” function can revise the settings of target
program, such as program name/start and end time/time length/storage place etc.
You also can press “EPG” key to enter “EPG” list, then select one program and press “REC”
key,the system will add this program to prerecord list directly.