Selecting Extras (if required)
Select the Extras option.
All available Extras will be shown in the
display.
Select the Extras you want using the
OK button.
A tick will appear beside the Extra to
show that it has been selected.
To deselect an Extra you have
chosen, simply press the OK button
again.
When you have finished selecting
Extras, confirm with Accept.
The display will change back to the
programme menu.
The number of Extras selected will
appear in the programme menu.
Activating Delay start (if required)
Press the button.
Select the function you want.
Use the arrow buttons to set the
time and confirm with OK.
The display will change to show the
programme menu.
Starting the programme
Start the programme by closing the
door.
At the end of a programme -
Switching off
At the end of a programme, the
TimeControl indicator light will go out
with the door shut.
The buzzer might also be sounding.
The programme has finished when
Finished appears in the display and the
door has opened slightly (if applicable).
In the QuickPowerWash programme the
door will not open until a few minutes
after the programme has finished.
The drying fan may continue to run for
a few minutes at the end of the
programme.
Switch the dishwasher off using the
button.
If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Unloading the dishwasher
Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
