Miele Independence KF1901Vi User instructions

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010707
Product and Cut-out Dimensions
KF1911Vi / KF1901Vi
36"
25" min.
35 3/4"
83 1/2" - 85 3/8"
9 1/2"
24"
6 5/8" - 8 1/2"
4 1/8"
84"
1 1/4"
E
Notes
5 foot - 120 Volt - 15 Amp 3-wire molded plug power
supply connects lower left rear.
Standard NEMA 5-15 Outlet - locate less than 9" above
finished floor
1/4" flexible water line - tape to floor
E -
O -
W -
• All Installations must be done in accordance with local codes
Location Codes
UNIT ACCEPTS
TWO (2) CUSTOM
FRONT PANELS
2" - 8 3/8"
O
W

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010707
Panel "B" Height
Front Panel Information
Fully Integrated Model
Width: 35 3/4" in all cases
Thickness: Minumum 3/4" outside frame
Standard Upper Panel Height: 53 5/16"
Note: Panel may extend above unit.
This is not considered in height calculation
Maximum panel weight: 200 Pounds
Lower Panel Height: Use the following calculation:
Panel Height = HOM - 53 9/16 - TKH
HOM = Total height of machine. Can be adjusted to
match adjoining cabinets - typically 84"
HOM is adjustable between 83 1/2" - 85 3/8"
TKH = Toe-kick height (2" - 8 3/8")
Maximum panel weight: 100 Pounds
Upper Panel
TKH
HOM
Panel Height
Custom Panel Installations
These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by
the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding
cabinets.
Panel size is determined in the following manner:
Lower Panel
Upper Panel Notes
If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.
Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"
Adjoining cabinet
Machine
Extended Panel Example:
Ajoining cabinet height: 87"
Height of machine: 84"
Difference: 3"
Extended panel height: 56 5/16"

NOTE: Drawing is not to scale.
SPECIFICATION SHEETS 010707
Front Panel Information
Hinging Details
0-1/8"
Front Panel
1" 1-1/4" 1-1/2"
0-3/4"
0-3/4" 1-1/4" 1-1/2" 1-3/4"
2"
1"
Cabinet Front
0-3/4"
1"
1-1/4"
1-1/2"
0-1/8"
FrontPanel
0-3/4" 1-1/4" 1-1/2" 1-3/4"
1"
Cabinet Front
90° Door 115° Door
Thickness options Thickness options
Door Swing
NOTE: Additional space needed depending on
thickness of front panels and handle used
38 11/16"
7/16"
Door Swing
16 7/8"
MAX
NOTE: Additional space needed depending on
thickness of front panels and handle used