MIGEL GCH 100 User manual
1
GCH 100
2
S
O
N
Q
T
V
PR
8
NM
3
4
5
6
7
8
2
Technical Data
English
Dear customer!
Thanks for your worthful choice and condence to Migel brand. We really
hope that you enjoy operating this product.
GCH 100
Power: 1000W
Full container capacity: 800ml
Voltage: 220-240V
Frequency: 50/60Hz
Part Name
Chopper lid
Chopping blade
Chopping bowl
Motor base
1
S
O
N
Q
T
V
PR
8
NM
Recommended times
IMPORTANT REMINDERS
Ingredients
Parsley
Onions
Shallots
Garlic
Rusks
Almonds
Hazelnuts
Walnuts
Parmesan
Raw meat
Maximum Time
3 X 2 s
6 X 2 s
4 X 2 s
5 X 2 s
2 X 2s
4 X 2 s
5 X 2 s
6 X 2 s
6 X 2 s
3 X 2s
Maximum Quantity
20 g
250 g
150 g
140
50 g
250 g
200 g
150 g
100
330 g
1. This product is not suitable for the wet foods, such as ice, fruits, etc.
Always cut solid foods into 3X3X3 cm cubes before using the chopper.
2. NEVER exceed the max quantity. Otherwise, you may damage your
chopper.
3. This product is intended for household use only.
13
Note
Do not run the food chopper continuously for longer than 15 seconds.
Leave to cool for 2 minutes in between each 15 seconds operation. Always
allow a 15-minute rest after 3 operations.
12
WARNING
Unplug the appliance before cleaning.
Caution
Blades are sharp. Handle carefully.
SAFETY INSTRUCTIONS
DANGER
Do not immerse the motor base in water nor rinse it under the tap.
1. This
befor you connect the appliance to the power, make sure that the voltage
indicated on the bottom of the appliance corresponds to the local power
voltage.
2. Never connect this appliance to a timer switch, to avoid a hazardous situation.
11
Befor first use, wash and dry the parts that will come into contact with
food.
1. Place the motor base on the table.
2. Do not plug in the appliance yet.
3. Place the chopping bowl on the motor base and lock it into place by
turning it anti-clockwise until it fits.
USING YOUR APPLIANCE
3. Never let the appliance run unattended. Do not use the appliance if the
power cord, the plug, protecting cover, rotating sieve or any other parts
are damaged or has visible cracks.
4. If the power cord is damaged, must be replaced by the manufacturer
or the maintenance department or similarly qualified persons to avoid a
hazard.
5. Never use any accessories or parts from other manufacturers.
6. This appliance can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
7. This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
8. For their safety, do not allow children to play with the appliance.
9. If food sticks to the wall of the blender, switch off the appliance and
unplug it. Then use a spatula to remove the food from the wall.
10. Be careful when you clean the blade units. The cutting edges are very
sharp.
11. Do not touch the blades, especially when the appliance is plugged in.
The blades are very sharp.
12. If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
13. Unplug the appliance immediately after use.
14. Always wait until the moving parts stop running, then switch off and
unplug the appliance before opening the lid and reaching into any of the
parts that move in use.
15. Always switch off and unplug the appliance if it is left unattended, and
before assembling, disassembling, cleaning and changing accessories, or
approaching parts that move in use.
16. Thoroughly clean the parts that come into contact with food before
you use the appliance for the first time.
10
1. Always unplug the chopper from the electrical outlet before cleaning.
Before first use and after every use, clean each part thoroughly.
2. Like all plastic products, please be sure to wash chopper lid, chopping
blade and chopping bowl by hand in warm soapy water. Rinse and dry
thoroughly. Chopping blade is sharp. Handle carefully when cleaning. The
chopping blade may be washed in a dishwasher. DO NOT clean using“Heat
Dry”o“r Sanitize”settings, as it may cause damage to the chopping blade.
3. To clean motor base, use a damp cloth to remove any residue, and dry
thoroughly. NEVER SUBMERGE THE MOTOR BASE IN WATER OR OTHER
LIQUID, OR PLACE IN A DISHWASHER.
4. Any servicing of the product should be performed by an authorized
service representative.
4. Fit the chopping blade on the central axis inside the
chopping bowl.
5. Handle the chopping blade with care, they are extremely sharp.
6. Cut the food up into pieces before placing it in the
chopping bowl.
7. Fit the chopper lid to the chopping bowl. Now you can plug the
appliance in.
8. Press down on the chopper lid to start the appliance immediately. To
stop it, release pressure on the chopper lid and the appliance will stop at
once.
9. Never remove the chopper lid until the chopping blade have come to a
complete stop.
10. Unplug the appliance each time after use and before any cleaning
operation.
HINTS
-Important: you will obtain a better chopping consistency by operating in
pulses instead of continually.
-Press for the required time you need to get the chopped consistency you
want.
-To obtain a finer consistency, use the spatula to release food that has
become stuck during chopping and re-distribute evenly inside the
chopping bowl. Over time, the chopping blade can become blunt and will
need to be replaced. A new blade = better performance.
-Let the appliance cool for 2 minutes before using again. Never use the
appliance empty.
CLEANING AND MAINTENANCE
9
You can help to protect the environment!
Please remember to respect the local regulations:
hand in the not-working electrical equipments to an
appropriate waste disposal center.
Enviroment friendly disposal
Table of contents
Languages:
Other MIGEL Food Processor manuals
