usha FP 2663 User manual

e
-- Toll free--
1800-1033- 111
usha _ [email protected]
USHA INTERNATIONAL LTD.
Plot No.15, Institutional Area, Sector 32, Gurgaon -122 001 (Haryana) Tel, [phone], Fax, [phone]
E-mail: [email protected]:www.usha.com
SHRIRAM'
Regd. Office, Surya Kiran Building, 19 Kasturba Gandhi Marg, New Delhi(lndia) Tel, [phone] Fax, [phone]
1509001:2008
Certdi!ldCompany
Fans• Sewing Machines• Home Appliances• Engines & Pumpsets• Electrical Motors & Pumps• Water Coolers.& Dispensers
• Inverters• Cook Tops, Hobs & Hoods• Auto Components
l!J[JCJ[;J ® i\eglsteredTrademarlland Cnpyrighto! USHAllITERNATlOtw.LTD . ..!.. ® i!aOlsleredTradema.rl<ol IJSHAIHTEllHATIOtw. LTU.
S.No.:SA36083756
I
I
INSTRUCTION MANUAL
FOOD PROCESSOR
Model - FP 2663
·------------ ___ ,,_ - .. ~---=·-=-·-=---=·-=---=- .. =---=-- ~---------------------------------------

I
~i
":f
j~:
j~
'11~'
mema·
Dear Customer,
Congratulations!
You are now the proud owner of Usha Food Processor.
Innovatively
designed, using only the highest quality material and components, your Usha
Food Processor is designed for years of trouble free performance.
Please read this Instruction Manual carefully before using and keep it cautiously 1flcr
reading for future reference.
Best Wishes
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
. .
IMPORTANT PRECAUTIONS
Keep the appliance out of reach of children.
This appliance is
for house hold use only.
mam1:;i·
Switch off the appliance and disconnect it from the mains before storing it.
Always fit the safety cover before using the food processor.
Do not spill water on basic unit. In case it happens please get it checked from
the service personnel before operating.
Never use Food processor
on wet surface as it may cause an electrical
shock.
Never push the food through feeder tube with your finger. Always cut food
into
small pieces and push the food into FP bowl with food pusher only.
Nevertouch moving parts during operation as they revolve at high speed and
may cause injury.
Handle the blade/ discs with care as very sharp. Hold the blades
from the
plastic parts only.
Never allow the processed food to touch the disc during operation. It could
force the disc upward and cause damage. If bowl begins to fill, empty
it out
in between operations.
Never exceed the
maximum level when working with liquids.
Always keep a visual check
on food being processed till you become
conversant with the Food processor. It is fast and powerful enough to finish
operation before you know it.
Never lay any cloth
or plastic sheet under basic unit as it may get sucked up
and block the ventilation holes
in the bottom during operation.
Place the processor bowl
on base of the processor before fitting any
attachments.
All blades & attachments should be removed before cleaning.
Don't place the appliance near hot surfaces like electrical hob, hot gas, heat
oven etc.
While using the
grinder/ blender make sure there are no blades fitted in the
processor.
While using the processor
grinder or blenderensure the lid is in place before
switching
on and do not remove the lid until the blade has stopped rotating.
Always remove the processor blade before emptying the processor bowl of
its contents.
3
---1
I
I
,,'I
',I
:ij
I!!
,,!II

I
----
TECHNICAL SPECIFICATIONS
Model No.
FP 2663
Rating
230V,-AC single phase, 50Hz
Wattage 600 Watts
Type of motor Universal motor
Time rating
30 minutes
Speed 3 speeds
with pulse
Over Load Protector Resetting
type -amp
FP Bowl capacity 2 ltr
BL Jar capacity 1.5 ltr
Multipurpose Jar Capacity
1.0 ltr.
Chutney
Jar Capacity 400
ml.
*Due to continuous effort for product upgradation, specification are subject to change
without prior notice.
FEATURES
• Extra powerful motor
•
Over load protector to protect motor from burn out
• Unbreakable
FP bowl/cover
• Safety switch
for safe operation of FP bowl & jars
• Fruit Filter
• Citrus & Centrifugal juicer attachment
•
Cord storage attachment
IDENTIFICATION OF PARTS
~~
--- ~
~'-'""'
!--------{ 3
4
PARTS LIST
A. Main Unit
1.
Basic Unit
2.
Rotary Switch
3.
Processor Spindle
4.
Over Load Indicator
5.
Power Indicator
6.
Reset Button
7.
Whipping Switch
8.
Safety Cover
9.
Safety Knob
10. Spatula
B.
Bowl Assembly
11.
Bowl
12.
Bowl Lid
13.
Feeder Tube
14.
Food Pusher
15. Spindle Extension [Type Al
c.
Blade Attachment
16. Kneading Blade
17.
Chopping Blade
18.
Blade Holder
19.
Shredding Blade [Fine]
20. Shredding Blade [Course)
21. Slicing Blade
22. French Fries Blade
D.
Multipurpose jar (1000 ml)
23. MP jar
24. Ring
25. Jar Lid
26. Handle
E.
Blending jar (1500 ml)
27. Jar
28. Jar Lid
@,1~::
u14 g
15
_FL~
~16 • 17
0~2 \JJ23
~ ~
I~
24 25
~ 26 ,27
~
28 0
UJ
29
5
l'j
.11
!i
~""'--·---
l .. tr p mnr illllU'MllMtnI mtrt•-rtr't tn-mmmmr •m I. nftnrr nr I rt:mn•111nm-nmm11nrrrrrrnrn111 rn "
.,,, ·~~·-"··' • ,.,,,..,_,~: •. ~~,,;~.;....~~7iffltii~<if~rut!li!Mtt!!l~~-Jlttl:tl~lli"'**-~-.":t$".: .. ~!!! _,!J$itlfflUt~~•flM'R!tftt'!"!M!~~·~~~~#'~Vft',,•:h\•1~•ll'.,,·<'·'-•' ·,· .·.~- . .-: ,; •-~,.~,; .. 1,o, .. ,1~1:.i.ihunf>l..<l~l!<~~-Ji>-·:1·:·>1M~w•i&£;t..
1
~W>..t:r1~~w~~""'""'"'~~~!'!'.""'~"~~"',;."n""'"'" ~."· ·

mE1m1~1
29. Fruit Filter
30. Bush Plate Assembly
31. Socket
F. Chutney Jar
~~1
32. Jar
33. Ring
34. Lid
G. Juicer
~ lk !'>
3211 33
35. Citrus Bowl
36. Spindle Extension (Type Bl
37. Citrus Cone
38. Centrifugal Juicer
~~
34 35
39. Juicer Mesh
40. Juicer Lid
41.
Pusher
~ J~ 37
~38
~lnJ
3911 40 41
USES OF BLADES & ATTACHMENTS
BLADES &
USAGE
SWITCH KNOB
MAX. QTY./
ATTACHMENTS
POSITION
CYCLE
Kneading Blade
Atta Kneading for pie and chapati etc. Start
with 1st 300 gms
This attachment can also be used for
speed and max
mixture for biscuit, cakes, pastries, when the dough
waffles etc.(For better results,
do not
forms into a
cover feeder tube
with food pusher. single ball
Water should
be added gradually as
move to 2nd
per requirement.] speed
Chopping Blade
Chopping of onions & leafy
2nd &3rd 500 gms
vegetable, meat mincing, tomato Speed
purees, mashing
of boiled potatoes,
mixing of batter for cakes.
6
Shredding Blade Coconut for chutney, vegetables &
(Fine)
sweets, cheese for pizza, carrots for
Halwa.
Shredding Blade Dry fruit like almonds, cashew nut for
(course] biscuits, cake, sweets etc., carrots
for
halwa, cucumber, reddish etc.
Slicing Blade Potatoes, onions, cucumbers, radish,
apples, carrots etc.
French Fries Potatoes for finger chips
Blade
Citrus Juicer Juicer for Citrus Fruits
like lime,
mousami etc.
Centrifugal
Non citrus fruits like apples, pine,
Juicer apples, carrots etc.
Fruit Filter Recommended
for juicing of water
(Attachment melon, musk melon, oranges,
lichi,
with BL jar]
tomatoes, grapes.
BLjar
Cold coffee, lassi, soups, milk
(1500 mll shakes, mango shakes etc.
MP jar Grinds idli and dosa, coconut
(1000 ml.]
chutney, pulse, rice, dhania, pepper,
garam masala, mincing etc.
Chutney jar Chutney &light
dry grinding (Dhania,
pepper, garam masalal.
OPERATING INSTRUCTIONS
KNEADING & CHOPPING OPERATION
STEPS:
2nd &3rd
Speed
2nd
&3rd speed
2nd &3rd
Speed
2nd &3rd
Speed
1st Speed
3rd Speed
-
Start with 1st
and then after
few seconds to
3rd speed
Start
with 1st
and then after
few seconds to
3rd speed
Start
with 1st
and then after
few seconds to
3rd speed
1. Ensure that the food processor unit is unplugged from
the power supply.
2. Insert the safety cover into the processor body aligning
marking
(T] on the safety cover with (•l marking on the
processor
body. (fig. 1]
3. Turn the safety cover clockwise firmly until it clicks into
place and (el Marking on the safety cover and(•] marking
on processor body are aligned. (fig. 1] H~~~~s',
0
~rebody
l!Jl;ll.ill.i.I
Bowl
Capacity
Bowl
capacity
Bowl
Capacity
Bowl
Capacity
Bowl
Capacity
Bowl
Capacity
-
1.2 ltrs.
250 gms.
100 gms.
7
~m:itolz1.: . .i«\:;&&:.~J!(drt!i&(~~··~"·;;;;;.7'"'i'."'=1""1'i"'"--,---""'"

[!]£1Clr.;l
Note: The food processor will not operate unless the safety
cover
is fitted in its place
4. Place the processor bowl on to the processor body
aligning [..-) marking on the processor bowl with [&l
marking on the processor body. [fig. 2)
5. Turn the processor bowl clockwise firmly until it clicks
into place and [• & &) marking on the processor bowl
t. l
l' d l! Proce-ssor-tiOWiJ
respec rve yare a rgne . "Processor ~dy_
6. When the processor bowl is fitted correctly, the
processor
bowl handle will be to the right of the food
processor assembly.
7. Place spindle extension [Type Al over the processor
spindle. Insert the required blade
on to the spindle
extension.
[fig. 4)
8. Fill in the flour/vegetable in the processor bowl.
9. Holding the processor bowl lid by the feeder tube fit the
lid on the processor bowl and rotate clockwise till the
protruding
lid tab has clicked into place and the marking
[e/ &) are aligned. [fig. 6)
10. Plug in the processor.
11. Run the Processor at speed 1& 2.
12. Add water gradually through the feeder tube till dough
forms
into rounded lump.[ln case of Kneading).
13. Allow it to run for 10 to 15 seconds, or till the desired
consistency
is achieved.
14. To remove the dough vegetables stop the processor,
press the safety
knob and hold the processes handle
firmly and turn anticlockwise
to unlock. [fig. 81
15. Lift the processor bowl and unlock the processor lid.
16. Remove the dough vegetables from the processor bowl;
use spatula if required.
Notes:
1. The food processor will not operate unless the safety
cover
is fitted in its place and the processor lid is locked.
2. To achieve best kneading action; apply light edible oil to
inside surface of food processor bowl.
For chopping operation please use chopping blade instead
of kneading blade as mentioned in the figure. All relevant
operations shall remain same.
8
!
l
OPERATING INSTRUCTIONS
SLICING, SHREDDING & FRENCH FRIES OPERATION
STEPS:
1. Follow the first 7 steps of kneading operation to fit the
processor
bowl.
2. Slide and snap the required blade on to the processing
blade holder.
[fig. 5 & 6)
3. Insert the blade holder on the spindle extension. [fig. 7)
4. Holding the processor lid by feeder tube fit the lid on the
processor
bowl by rotating clockwise till the protruding
lid tab has clicked into place and the marking[• & &) are
aligned.
[fig. 8)
5. Plug in the processor.
6. Run the processorat speed 1or2. Insert vegetable in the
feeder tube. Insert
food pusher into the feeder tube and
apply pressure.
[fig. 9)
7. The slices, shredded vegetable will be collected in the
processor
bowl.
8. To remove the slices stop the processor, press the safety
knob and hold the processor handle firmly and turn
anticlockwise
to unlock. [fig. 10)
9. Lift the processor bowl and unlock the processor lid.
10. Remove the processing blade holder and then the slices,
shredded vegetable from the processor
bowl.
NOTES:
1. The food processor will not operate unless the safety
cover
is fitted in its place and the processor lid is locked.
2. Caution: the stainless steel blades are very sharp, take
extreme care while handling.
For shredding operation, please use shredding blades [Fine &
course) instead
of slicing blade as mentioned.
For French fries operation [Finger chips). please use finger
chips blade instead
of shredding or slicing operation as
mentioned.
All relevant operations shall remain same.
6.
[!](lCl[;l
9

1!10Clfil
OPERATING INSTRUCTIONS
CITRUS JUICER
STEPS:
1. Ensure that the processor is unplugged from the power
supply.
2. Insert the safety cover into the processor body aligning
marking (T)
on the safety cover with (•) marking on the
processor
body. (fig. 1)
3. Turn the safety cover clockwise firmly until it clicks into
place and marking (•)on the safety cover and(•) on the
processor
body are aligned. (fig. 1)
Note: the food processor will not operate unless the safety
cover
is fitted in its place.
4. Place the processor bowl on to the processor body
aligning (T) marking on the processor bowl with (•)
marking
on the processor body. (fig. 2)
5. Turn the processor bowl clockwise firmly until it clicks
into place and (e& •) marking on the processor bowl and
th
b d t. l
l' d le Processor bowl
e processor o yrespec 1ve Yare a 1gne · 14 Processor body
--·---
6. When the processor bowl is fitted correctly, the
processor
bowl handle will be to the right of the food
processor assembly.
7. Place spindle extension (type B) over the processor
spindle.
(fig. 4)
8. Fit the citrus bowl into the processor bowl. (fig. 5)
9. Rotate the citrus bowl clockwise till the protruding lid
tab has clicked into place and the markings (•!•) are
aligned.
(fig. 6)
10. Insert the citrus cone into the off centred spindle. (fig. 7)
11. Plug in the processor.
12. Place half cut sweet limes on citrus cone and hold with
a cupped hand.
10
··~·~i:,
13. Run the processor at minimum speed only.
14. The juice will be collected in the processor bowl.
15. The seeds and the pulp will accumulate in the citrus
bowl.
16. Remove the seeds and the pulp as and when it gets
filled.
17. To remove the juice, stop the processor, press the
safety
knob and hold the processor handle firmly and
turn anticlockwise
to unlock. (fig. 8)
18. Lift the processor bowl and unlock the citrus press
bowl.
19. Remove the citrus cone, citrus press bowl and then the
juice from the processor
bowl and store in a container.
NOTE:
1. Operate the juice at minimum speed.
2. Pulp and seeds must be removed before it starts over
spilling under the citrus cone.
Empty the seeds and
pulp regularly.
OPERATING INSTRUCTIONS
CENTRIFUGAL JUICER
STEPS:
1. Ensure that the food processor unit is unplugged from
the power supply.
2. Insert the safety cover into the processor body aligning
making (T)
on the safety cover with (•)marking on the
processor
body. (fig. 1)
3. Turn the safety cover clockwise firmly until it clicks into
place and marking (e) on the safety cover and(•) on the
processor
body are aligned. (fig. 1) ! ~;~ect~
Note: The food processor will not operate unless the safety
cover
is fitted in its place-
4. Place the processor bowl on to the processor body
aligning (T) marking on the processor bowl with (•)
marking
on the processor body. (fig. 2)
5. Turn the processor bowl clockwise firmly until it clicks
into place and (e & •) marking on the processor
bowl and the processor body respectively are
l. d (f'
3) leP~ocessor bowl
a lgne . lg. 14 Processor body,
-~~~.;.;•··~~·,'!".'·: ... !;..•;
r:~~~:~·~,~~(2~2~!1':''
6.
7.
8.
1!10Clfil
11
I'
~1
j
't
~

[!]EJCJIJ
6. When the processor bowl is fitted correctly, the
processor
bowl handle will be to the right of the food
processor assembly.
7. Place the juice extractor bowl along with juice extractor
mesh over the processor spindle.
[fig. 4)
8. Fit the juice extractor lid over the juice extractor and
rotate clockwise ensuring that
lid tab has clicked into
place and the marking [e/.&.) are aligned. [fig. 5)
9. Plug in the processor.
10. Run the processor at maximum speed.
11. Feed cut pieces of apple or any other non-citrus fruit
through the feeder tube.
[fig. 6)
12. Use the food pusher to push and press the fruit pieces.
[fig. 7)
13. The juice will be collected in the processor bowl.
14. The pulp will accumulate in the juice extractor bowl.
15. If the juice extractor bowl gets clogged during operation,
turn the processor
OFF and remove the pulp from it.
16. To remove the juice, stop the processor, press the
safety
knob and hold the processor handle firmly and
turn anticlockwise
to unlock. [fig. 8)
17. Lift the processor bowl and unlock the juicer lid.
18. Remove the juice extractor bowl along with 1u1cer
extractor mesh and then juice from the processor bowl
to be stored in a container.
Notes:
1. Operate the juicer at maximum speed.
2. Pulp must be removed before it starts over spilling.
Empty the pulp regularly.
OPER1~ .. f~
BLENDING, GRINDING AND CHUTNEY JAR OPERATION
STEPS:
1. Ensure that the food processor unit is unplugged from
the power supply.
2. Remove the safety cover from the processor body by
turning it anticlockwise. [fig. 1)
12
8.
3. Place the processor bowl on the processor body
aligning [T) marking on the processor bowl with [.&.)
marking on the processor body. [fig. 2)
4. Turn the processor bowl clockwise firmly until it clicks
into place & [e/.&.) marking on the processor bowl & the
processor
body respectively are aligned.
5. When the processor bowl is fitted correctly, the
processor
bowl handle will be to the right of the food
processor assembly.
6. Holding the processor or lid by the feeder tube fit the
lid on the processor bowl and rotate clockwise till
the protruding lid tab has clicked into place and the
marking
[e/.&.) are aligned. Insert food pusher into the
feeder tube. Ensure
no processing blades, discs are
fitted
to the processor. [fig. 4)
7. Place the jar into its location on processor body;
matching [T&.&.) marking on jar and body respectively
turn clockwise until the grinder clicks
in place and the
marking [•/.&.)are aligned. [fig. 6)
8.
9.
10.
11.
12.
13.
14.
Place the ingredients to be ground in the jar.
Place the lid on the jar. [fig. 7)
Plug in the processor.
Run the processor starting with speed 1 to 3 gradually
till the desired consistency is achieved.
Stop the processor.
Remove the ingredients from the jar, use spatula if
required.
Use the jar as per required operation.
OPERATING INSTRUCTIONS
SPECIAL INSTRUCTIONS FOR USING FRUIT FILTER.
1. Place the fruit filter inside the blender jar such that its
flour slots
fits into the four ribs inside the blending jar.
[fig. 7)
2. Press it down so that it is fixed properly.
3. Fruits should be cut into small pieces before putting
inside the fruit filter for extracting the juice.
[fig. 8)
4. Close the jar Lid. [fig. 9)
5. Initially use low speed and then speed can be increased.
6. After juicer is done, pour the contents into a glass.
[!](lCJIJ"
13
.....,_,,....,"""'"',,,,_,.
Mfflf:E~'*·~JJ~d·

l!Jl]C][;]'
8.
...
OVER LOAD PROTECTOR (OLP)
• The OLP is provided in the food processor to protect the motor from burning.
•
When the jar is filled more than what is specified or the liquid is too viscous, the OLP
trip indicator illuminates and the motor steps automatically.
•
When this happens, reduce the quantity of ingredient being ground or add some
water.
• To restart, wait for a while and press the reset button of OLP and then start the
processor again.
NOTE:
1. The grinderjar will not operate unless the processor bowl is fitted in its place and the
processor
is locked.
2. Caution: the stainless steel blades are very sharp, take extreme care while handling.
CLEAN ING/MAINTENANCE
• Unplug the Food processor before cleaning.
• Remove the
Bowl cover, Bowl and Blender/Dry grinder jar.
• Wash and
wipe all accessories.
• Never wash the motor
unit in water, wipe and clean with a dry or slightly damp cloth.
• To clean the blender fill with half litre of warm water and run at speed 2for10 sec.
14
l!lllCllJ
.. WARRANTY CARD
This appliance is warranted for 2 years on product & 5 Years on Motor
against all manufacturing defects from the date
of sale. In the event of any
complaint, please contact Usha Care at Toll Free No. 1800 1033111.
The warranty
is valid only when:
1) The appliance has been installed, used and maintained in accordance with
the instruction manual.
2) The warranty card and cash memo duly signed by the authorized dealer are
presented with the complaint.
3) The appliance has not been opened or tampered with, by any unauthorized
person.
This warranty does not apply for:
1) Damages due to chipping, peeling, plating and denting.
2) Breakage or damage to components made out of Bakelite, Urea, ABS, SAN
and such plastic materials, rubber parts and cord.
3) Normal wear and tear of parts.
4) Damage resulting from accidents, mishandling or negligence on part of the
customer.
Liability for consequential loss or damage is neither accepted nor implied.
S.NO:
S.No.:SA3608 3756
CASH MEMO DATE:
-----~
DEALER'S NAME AND ADDRESS: ____________ _
OWNER'S NAME & ADDRESS: _____________ _
15
--~.y~-~----~·--