Minarik CE24PWM User manual

CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0Printed in the U.S.A –9/01
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections

Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on the next page. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32

Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on the next page. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32

CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections
CE24PWM AC Line Filter Installation Guide
General Information
The Minarik CE24PWM is a radio-frequency interference (RFI) filter
designed to block high-frequency noise in AC power lines. Used in
conjunction with an appropriate motor, drive and enclosure, the
CE24PWM will help your system meet CE standards for noise
reduction.
Specifications
Input Power ............................120/240 VAC, 50/60 Hz
Maximum Input Current ...........................24AmpsAC
Ambient Temperature Range ..........................0–50ºC
1
Minarik Corp., 901 East Thompson Avenue, Glendale, California 91201-2011
Tel: [phone] Fax: [phone] http://www.minarikcorp.com
Document Number 250-0315, Revision 0 Printed in the U.S.A – 5/00
4
Connections

Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on page 4. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32
Connections
Connect the CE24PWM as shown on the next page. Ensure that the
CE24PWM ground connector is connected to earth ground, not
system ground. It may be necessary to place the drive in an EMC-
approved enclosure.
Dimensions
32