Minebea Rod End Bearings HR-E User manual

Page 46
eMINEBEA.COM
Copyright 2006, Minebea Co., Ltd.
3 PIECE ROD END BEARINGS 〔METAL TO METAL〕
HR-E
MALE ROD ENDS METAL TO METAL 3 PIECE
Materials
HR-E HR-ECR
BODY Chromium-Molybdenum Steel
Zinc Plated
SUS630 Stainless Steel
Passivated
RACE 410 Stainless Steel / Heat Treated 410 Stainless Steel / Heat Treated
BALL Bearing Steel / Chrome Plated Bearing Steel / Heat Treated
Description of Types
Dimensions in mm
MINEBEA
Part
No.
φB
H7
φD
±0.5
W
0
－0.13
H
±0.13
F
±0.5
TH
JIS Class 2
L
±0.7
α
(deg.)
φO
Ref.
SφDB
Ref.
Static Limit Load kN Radial
Static
Ultimate
Load
kN
Fatigue
Load
(2)
kN
Approx.
Weight
g
Radial Axial (1)
HR3E 316.0 7.0 5.25 30.0 M3 × 0.5 10.0 18 5.2 8.73 3.62 2.94 4.51 0.73 25
HR4E 418.0 9.5 7.75 35.0 M4 × 0.7 16.0 16 5.8 11.11 6.27 3.53 7.84 1.27 30
HR5E 520.5 11.0 8.75 39.5 M5 × 0.8 22.0 15 7.8 13.49 10.29 5.09 12.84 2.10 35
HR6E 6M6 × 1.0 14.51 18.14 2.99
HR8E 823.0 8.25 46.0 M8 × 1.25 29.0 14 10.9 15.48 26.77 5.58 33.44 5.54 40
HR10E 10 26.0 12.5 10.75 47.0 M10 × 1.5 812.2 17.46 37.65 6.76 47.07 7.84 65
HR12E 12 34.0 16.0 13.25 62.0 M12 × 1.75 37.0 10 15.4 22.22 62.46 8.33 78.06 12.94 126
HR14E 14 36.0 17.0 14.25 64.0 M14 × 2.0 38.0 818.9 25.40 82.96 9.02 103.65 17.25 140
HR15E 15 38.0 18.0 65.0 11 19.0 26.19 85.90 9.31 107.38 17.84 165
HR16E 16 39.0 19.0 15.25 66.5 M16 × 2.0 39.5 10 19.2 26.99 100.71 9.70 125.81 20.98 195
HR17E 17 41.0 20.0 72.5 M16 × 1.5 42.0 12 20.4 28.58 101.40 10.29 126.70 21.08 220
HR18E 18 43.0 16.30 79.5 M18 × 1.5 46.0 10 120.62 12.16 150.72 25.10 250
HR20E 20 45.0 22.0 83.0 M20 × 1.5 50.0 13 22.9 31.75 121.30 12.84 151.61 25.20 290
HR22E 22 52.0 19.30 86.0 M22 × 1.5 51.0 627.1 34.92 156.21 15.10 195.25 32.55 450
HR25E 25 70.0 35.0 25.30 105.0 M24 × 2.0 59.0 15 32.3 47.62 300.08 20.88 375.10 62.56 1150
HR28E 28 75.0 110.0 M27 × 2.0 62.0 14 36.8 50.80 283.70 23.24 354.60 59.13 1500
HR30E 30 78.0 37.0 26.30 120.0 M30 × 2.0 65.0 40.4 54.77 271.93 24.81 339.89 56.68 1800
Notes
(1) Axial load indicates either the smaller value of static load or proof
load.
(2) Special specification can bare higher fatigue load.
3. Made to order only.
4. Radial clearance All Size: 0.051mm MAX
◯ Please consult MINEBEA for availability of bearings in this series.
Bore size ～3 ～6 ～10 ～18 ～30
H7 Tolerance
（μm）
＋10
0
＋12
0
＋15
0
＋18
0
＋21
0