Mini Gadgets MCCWifiWeatherStation User manual

Updated 04/05/2018 1 Version 1.0
WIFI WEATHER STATION
SKU: MCCWifiWeatherStation

Updated 04/05/2018 2 Version 1.0
THANK YOU FOR PURCHASING THE
MCCWIFIWEATHERSTATION
Please read this manual before operating the
MCCWifiWeatherStation and keep it handy.
Your purchase should include:
1 x MCCWifiWeatherStation Device
1 x AC Adapter
1 x USB Cable
1 x Back Cover
1 x Outdoor Unit
1 x Manual

Updated 04/05/2018 3 Version 1.0
OPERATING THE MCCWIFIWEATHERSTATION
BEFORE YOU START
1. First you must download the Pro iCam app from the
Google Play Store or the iPhone App Store.
oAndroid:
https://play.google.com/store/apps/details?id=co
m.g_zhang.Pro_iCam&hl=en
oiPhone:
https://itunes.apple.com/us/app/pro-
icam/id925639505?mt=8
2. If you wish to enable SD Card recording, you must insert a
MicroSD card into the unit. (if applicable)
CONNECTING TO YOUR DEVICE DIRECTLY
1. Please plug your device into power using the provided
power cord and AC Adapter. Turn the switch on the side of
the device to the ON position.
2. Turn on your phone’s Wi-Fi and wait up to 7 minutes for
the device to generate a Wi-Fi signal. The Wi-Fi Signal
name will match the UID on the sticker on the back of the
device.
3. Once the device generates its Wi-Fi signal, connect to it via
the Wi-Fi settings on your phone.
oNOTE: Some Android devices may produce a
warning that the network has no internet access. If
you see this, choose to connect to the network
anyway.
4. After connecting to the Wi-Fi Signal with your mobile
device, open the Pro iCam App.

Updated 04/05/2018 4 Version 1.0
NOTE: For iOS devices you must wait until the Wi-Fi Signal
appears next to your Phone Carrier Name in the status bar
at the top of your phone screen.
5. Once the app opens, tap the plus (+) button at the top
right of the app.
6. Tap “Add New Online Camera”.
7. Tap “Search (LAN)” and the app should show a “New
Device”.
8. Tap on the New Device and all the camera’s information
will be filled in.
9. Tap “OK”.
10. Now you will see the app listed in the home screen of the
app and it will show “Online”. You may now tap on this
camera entry to test the video feed.
NOTE: You will be prompted to change the device password the
first time you view the camera video feed. We suggest that you do
change this to prevent any unauthorized viewing of your camera.
IMPORTANT: You must keep this password in a safe place. If you
ever need to access the camera from a different phone or reinstall
the camera app, this password will be required to re-add the
camera. If you forget the password, a factory reset will be required.
CONNECTING THE DEVICE TO YOUR WIFI FOR REMOTE VIEWING
1. From the home screen of the app, tap the settings gear
next to the camera name.
2. A menu will pop up, choose “Device Settings”.
oFor Android devices the option will be “Advanced
Config”.
3. Next choose “WiFi Config”.
4. Select your network from the list of available networks
and then enter your Wi-Fi password. Press OK.

Updated 04/05/2018 5 Version 1.0
5. A dialog will pop up to confirm the network name and
password you entered. Make sure these are correct and
then press OK.
6. The device will reboot. You will know the device has
connected to your Wi-Fi successfully when the camera
shows Online in the home screen of the app. This may take
up to 5 minutes.
7. Once the device shows as Online, confirm that it
connected to your Wi-Fi successfully by opening the
settings app on your phone and choosing your Wi-Fi
settings. If you connected successfully, the device will no
longer be generating its own Wi-Fi signal, and you should
be connected to your own Wi-Fi.
oNOTE: If you still see a network broadcasting that is
the named after the UID on the back of your
device, connecting to your Wi-Fi has failed. Please
repeat steps 3-7 above and pay careful attention to
the network password you entered.
8. The device is now connected to your Wi-Fi and may be
accessed from anywhere that your phone has an internet
connection.
HOW TO ADJUST THE VIDEO QUALITY OF THE STREAM
1. Open the live video stream of your camera.
2. Once the video is streaming, tap the screen once to reveal
the options.
3. In the top right of the screen there will be a video quality
setting (HD, High, Normal, and Low Bandwidth). Choose
the quality according to your preference.
HOW TO SET UP MOTION ALARM RECORDING

Updated 04/05/2018 6 Version 1.0
1. To set up the motion alarm, return to the home screen of
the app and tap the settings gear next to your camera and
then choose “Device Settings”.
oFor Android devices the option will be “Advanced
Config”.
2. Tap “Alarm Config”.
3. Tap “Motion Detection Sensitivity” and set according to
your preference. (We suggest a setting near the middle of
the available options.)
4. Tap OK at the bottom of the screen and you will receive
notifications on your phone when motion is detected.
5. To record when the alarm detects motion, select “SD Card
Record Config” from the Settings menu.
6. Tap “Record Setting” and choose “On Alarm”.
7. Tap OK at the bottom of your screen to save your settings.
oNOTE: You must have an SD Card inserted into the
device for this to work. See the “Before You Start”
section for instructions.
HOW TO STREAM LOCALLY ON YOUR PC
1. After connecting your device to Wi-Fi, insert the CDROM
that came with the device into your computer.
2. Choose the appropriate folder based on your operating
system (Mac or Windows).
3. Copy the application to your computer from the CDROM.
4. Open the application.
5. Double click on the IP address shown which is for your
camera.
6. Your default browser will open.
7. Choose the appropriate setting for your browser.
RETRIEVE THE FILES TO YOUR PC
1. Remove the MicroSD Card from your device.

Updated 04/05/2018 7 Version 1.0
2. Use a MicroSD Card Reader (not provided) to connect the
MicroSD card to your computer.
3. Locate “Removable Disk” inside the (My) Computer folder.
AutoPlay Removable Disk > Open folder to view
files
Or…
Go to Start > Computer > Removable Disk
4. Open the Removable Disk drive.
5. Open the folder containing the files.
6. Double click the file you want to view.

Updated 04/05/2018 8 Version 1.0
TROUBLESHOOTING
THE DEVICE WON’T TURN ON
Make sure the device is plugged into an electrical outlet
and the battery is fully charged.
CANNOT RECORD TO SD CARD
Confirm you have inserted a MicroSD Card into the unit.
HOW TO FACTORY RESET THE DEVICE
A factory reset will restore all settings to their original
factory settings.
Plug in camera, wait 2 minutes, press reset button for 5
seconds until right LED light turns off. Camera will reboot
and product a Wi-Fi signal within 7 minutes.
CAN’T FIND DEVICE’S WIFI SIGNAL
Please unplug the device, wait 30 seconds, plug your
camera back in, and try again.
THE APP CANNOT FIND THE CAMERA AFTER CHOOSING
“SEARCH/LAN”
Ensure you are still connected to the device’s Wi-Fi signal
by going to your phone’s Wi-Fi settings.
Please unplug the device, wait 30 seconds, plug your
camera back in, and try again.
OTHER PROBLEMS
Call our technical support at 770–694–6921

Updated 04/05/2018 9 Version 1.0
SPECIFICATIONS
Video Resolution
1080P, 720P, 480P
Video Format
ASF
Type of Memory
External MicroSD Card
Default Password
8888
Memory Capacity
Up to 128GB
Recording Capacity
1GB ≈ 50 minutes
USB Interface
2.0 USB
Player Software
VLC
Time Date Stamp
Yes
Loop Recording
Yes
Operating Systems
Windows XP & Up
Mac OSX 10.5 & Up
Linux