minniemobile Charger Wall Mount Operator's manual
www.minniemobil.com
Charger Wall Mount - Instructions for Assembly and Use
ChargerWallMount
InstructionsforAssemblyandUse
www.minniemobil.com
Charger Wall Mount - Instructions for Assembly and Use
2
1. COMPONENTS
1 Wall Mount
2 Screws
2 Wall plugs
CHARGER WALL MOUNT
Stylish wall mount for the charger of your minniemobil.
2. ASSEMBLY
2.1. Place the Wall Mount on the wall where you would like to have your charger
and even it out.
2.2. Mark the required position for the two boreholes on the wall (Fig. 2).
2.3. Bore the holes and place the plugs.
2.4. Place the Wall Mount and insert the screws.
3. USE
3.1. Place the charger on the Wall Mount.
3.2. Roll up the excess of cable behind the Wall Mount plate (Fig. 3).
3.3. Plug in the charger to the wall socket.
3.4. Place the charger´s scooter plug at the Wall Mount´s groove made for this pur-
pose, making it ready for you to pick it up when the accumulator of your minnie-
mobil needs a charge (Fig. 4).
Fig. 1
www.minniemobil.com
Charger Wall Mount - Instructions for Assembly and Use 3
Fig. 2 Fig. 3
Fig. 4
NOTICESTOCONSUMER
The warranty covers all defects of the product which are demonstrably attributable to
material or manufacturing defects. The warranty period is 24 months after receipt of
the readiness for dispatch, at the latest after delivery. Excluded from the warranty are
damages which are caused by normal wear and tear, by intent, negligent or improper
operation or use. No warranty is given if you use inappropriate care products, lubrica-
ting oils and greases.
Minniemobil GmbH
Grünwalder Weg 28c
82041 Oberhaching
Phone: +49 89 651089 22
www.minniemobil.com
Germany
Date of purchase: / /
Necessary for warranty
Your local dealer:
Table of contents
