MINOURA MAG-850 User manual

RESOLUTION DIAGRAM
MAG-850 indoor bicycle trainer
coupling (R)
coupling cover
(move side)
hub
handle
leg rubber
cap
frame rubber cap
main frame
flywheel cover
flywheel
flywheel side
inner case
drive roller
connecting plate
mount plate
mag side inner case
alloy rotor outer
cover
foot pedal
400-4511-00 : Dial Mag resistance unit 400-4503-00 : Mag side inner case
400-4502-00 : Dial outer cover 400-4504-00 : Flywheel side inner case
400-4611-00 : Re ote Mag resistance unit 400-4505-00 : Flywheel cover
400-4602-00 : Re ote outer cover 400-4506-00 : Drive roller
400-4604-00 : Hub handle 400-4605-00 : Fra e rubber cap
400-1243-00 : Coupling (right side) 400-4606-00 : Leg rubber cap
400-4509-00 : Foot pedal 400-4607-00 : Coupling cover ( ove side)
400-4608-00 : Coupling cover (fix side)
WARRANTY PARTS
coupling cover
(fix side)

!
!
!
!
!
!
!
!
!
!
!
Re ove the coupling protector cap when you use your own quick releaseRe ove the coupling protector cap when you use your own quick release
Re ove the coupling protector cap when you use your own quick releaseRe ove the coupling protector cap when you use your own quick release
Re ove the coupling protector cap when you use your own quick release
skewer.skewer.
skewer.skewer.
skewer.
WARNINGS
Use two-wheeled bicycles only. Tande s ay be used if balanced correctly.Use two-wheeled bicycles only. Tande s ay be used if balanced correctly.
Use two-wheeled bicycles only. Tande s ay be used if balanced correctly.Use two-wheeled bicycles only. Tande s ay be used if balanced correctly.
Use two-wheeled bicycles only. Tande s ay be used if balanced correctly.
Re ove all oils and oisture fro the drive roller and the tire before use.Re ove all oils and oisture fro the drive roller and the tire before use.
Re ove all oils and oisture fro the drive roller and the tire before use.Re ove all oils and oisture fro the drive roller and the tire before use.
Re ove all oils and oisture fro the drive roller and the tire before use.
Keep both hands on handlebars at all ti es and aintain a nor al ridingKeep both hands on handlebars at all ti es and aintain a nor al riding
Keep both hands on handlebars at all ti es and aintain a nor al ridingKeep both hands on handlebars at all ti es and aintain a nor al riding
Keep both hands on handlebars at all ti es and aintain a nor al riding
position.position.
position.position.
position.
Check the couplings supporting the rear hub for da ageCheck the couplings supporting the rear hub for da age
Check the couplings supporting the rear hub for da ageCheck the couplings supporting the rear hub for da age
Check the couplings supporting the rear hub for da age
and cracks. Accidents ay occur fro cracked or da -and cracks. Accidents ay occur fro cracked or da -
and cracks. Accidents ay occur fro cracked or da -and cracks. Accidents ay occur fro cracked or da -
and cracks. Accidents ay occur fro cracked or da -
aged couplings.aged couplings.
aged couplings.aged couplings.
aged couplings.
When using the trainer, place it on a flat surface for safe training.When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.When using the trainer, place it on a flat surface for safe training.
When using the trainer, place it on a flat surface for safe training.
Do not over tighten the hub-cla p handles. Over-tightening ay causeDo not over tighten the hub-cla p handles. Over-tightening ay cause
Do not over tighten the hub-cla p handles. Over-tightening ay causeDo not over tighten the hub-cla p handles. Over-tightening ay cause
Do not over tighten the hub-cla p handles. Over-tightening ay cause
da age to the trainer or bicycle fra e. The cla p handles should be a snugda age to the trainer or bicycle fra e. The cla p handles should be a snug
da age to the trainer or bicycle fra e. The cla p handles should be a snugda age to the trainer or bicycle fra e. The cla p handles should be a snug
da age to the trainer or bicycle fra e. The cla p handles should be a snug
and secure fit. Do not force!and secure fit. Do not force!
and secure fit. Do not force!and secure fit. Do not force!
and secure fit. Do not force!
Keep away fro s all children, and keep hands and feet away fro spin-Keep away fro s all children, and keep hands and feet away fro spin-
Keep away fro s all children, and keep hands and feet away fro spin-Keep away fro s all children, and keep hands and feet away fro spin-
Keep away fro s all children, and keep hands and feet away fro spin-
ning rollers and wheels at all ti es.ning rollers and wheels at all ti es.
ning rollers and wheels at all ti es.ning rollers and wheels at all ti es.
ning rollers and wheels at all ti es.
Before use, ake sure all bolts and nuts are securely fastened.Before use, ake sure all bolts and nuts are securely fastened.
Before use, ake sure all bolts and nuts are securely fastened.Before use, ake sure all bolts and nuts are securely fastened.
Before use, ake sure all bolts and nuts are securely fastened.
• Read all instructions including the back page of the POP card board care-• Read all instructions including the back page of the POP card board care-
• Read all instructions including the back page of the POP card board care-• Read all instructions including the back page of the POP card board care-
• Read all instructions including the back page of the POP card board care-
fully before use.fully before use.
fully before use.fully before use.
fully before use.
• So e asse bly required.• So e asse bly required.
• So e asse bly required.• So e asse bly required.
• So e asse bly required.
• Keep the anual handy at all ti es.• Keep the anual handy at all ti es.
• Keep the anual handy at all ti es.• Keep the anual handy at all ti es.
• Keep the anual handy at all ti es.
• Do NOT use trainer for any other purpose than instructed.• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.• Do NOT use trainer for any other purpose than instructed.
• Do NOT use trainer for any other purpose than instructed.
• The trainer is anufactured to precise standards. You ay not disas-• The trainer is anufactured to precise standards. You ay not disas-
• The trainer is anufactured to precise standards. You ay not disas-• The trainer is anufactured to precise standards. You ay not disas-
• The trainer is anufactured to precise standards. You ay not disas-
se ble or rebuild it.se ble or rebuild it.
se ble or rebuild it.se ble or rebuild it.
se ble or rebuild it.
• "Magturbo" is the trade arks of Minoura Co.,Ltd. and ay not be copied.• "Magturbo" is the trade arks of Minoura Co.,Ltd. and ay not be copied.
• "Magturbo" is the trade arks of Minoura Co.,Ltd. and ay not be copied.• "Magturbo" is the trade arks of Minoura Co.,Ltd. and ay not be copied.
• "Magturbo" is the trade arks of Minoura Co.,Ltd. and ay not be copied.
IMPORTANT NOTES
Replace your quick release skewer to the supplied one and install the sup-Replace your quick release skewer to the supplied one and install the sup-
Replace your quick release skewer to the supplied one and install the sup-Replace your quick release skewer to the supplied one and install the sup-
Replace your quick release skewer to the supplied one and install the sup-
plied coupling protector cap onto the right side coupling when you use theplied coupling protector cap onto the right side coupling when you use the
plied coupling protector cap onto the right side coupling when you use theplied coupling protector cap onto the right side coupling when you use the
plied coupling protector cap onto the right side coupling when you use the
trainer. Otherwise the stability will not be guaranteed.trainer. Otherwise the stability will not be guaranteed.
trainer. Otherwise the stability will not be guaranteed.trainer. Otherwise the stability will not be guaranteed.
trainer. Otherwise the stability will not be guaranteed.
Open the legs fully to get axi u stability.Open the legs fully to get axi u stability.
Open the legs fully to get axi u stability.Open the legs fully to get axi u stability.
Open the legs fully to get axi u stability.

The Magturbo unit has 7 different levels of load force, replicating actual riding resistance.
The load settings range fro high (H) to low (L) and can be adjusted via the white lever on
the Magturbo unit or the lever on the thu b shifter device. The rider ay also adjust the
load force by shifting up or down a ong his gears, depending on the level desired.
We reco end that you start with a ediu to low load force and gradually work up, in-
creasing force as uscled war up.
Decreasing Load ForceDecreasing Load Force
Decreasing Load ForceDecreasing Load Force
Decreasing Load Force
To decrease the load force, ove the white lever on Mag unit
toward the (L) sy bol.(see Fig. B)
Be sure the lowest selection is not zero load, there still be a s all
level of force.
If your Mag unit is a re ote control type, turn the lever on your
thu b shifter device toward the (L) sy bol.
(see Fig. C)
Increasing Load ForceIncreasing Load Force
Increasing Load ForceIncreasing Load Force
Increasing Load Force
To increase the load force, ove the white lever on the Mag unit
toward the (H) sy bol. (see Fig. A)
If your Mag unit is a re ote control type, turn the lever on your
thu b shifter device toward the (H) sy bol.
(see Fig. C)
!
You ust not be riding the trainer when you are adjusting the white leverYou ust not be riding the trainer when you are adjusting the white lever
You ust not be riding the trainer when you are adjusting the white leverYou ust not be riding the trainer when you are adjusting the white lever
You ust not be riding the trainer when you are adjusting the white lever
on the Mag unit for load force. Make sure all parts have stopped spinning.on the Mag unit for load force. Make sure all parts have stopped spinning.
on the Mag unit for load force. Make sure all parts have stopped spinning.on the Mag unit for load force. Make sure all parts have stopped spinning.
on the Mag unit for load force. Make sure all parts have stopped spinning.
Do not try to adjust the lever with your feet while riding.Do not try to adjust the lever with your feet while riding.
Do not try to adjust the lever with your feet while riding.Do not try to adjust the lever with your feet while riding.
Do not try to adjust the lever with your feet while riding.
USING THE MAGTURBO UNIT
HH
HH
H
LL
LL
L
(Fig. A)
(Fig. B)
(Fig. C)

If you cannot shift to either the lowest (L) or the highest (H)
position, it is possible that the inner wire of the re ote shifter
cable is too long and the wire tension is loose. If so, please
adjust the tension with the following steps;
1.1.
1.1.
1.
Set the re ote shifter lever at “H” position. Re ove the re-
ote shifter device fro the handlebar and straighten the cable.
2.2.
2.2.
2.
Re ove the plastic cap located on the botto of the cable.
(see Fig. E)
3.3.
3.3.
3.
Hold the adjusting screw with your right hand and push it to-
wards the direction of the outer cable, then adjust the nut with
your left hand to ake the wire tension properly.
Trouble Shooting Your Remote Shi ter Unit
Wire Tension
Adjusting Screw
ut Plastic Cap
Cable
(Fig. D)
MINOURA JAPAN HEAD OFFICEMINOURA JAPAN HEAD OFFICE
MINOURA JAPAN HEAD OFFICEMINOURA JAPAN HEAD OFFICE
MINOURA JAPAN HEAD OFFICE
1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN
Phone +81- (0)584-27-3131 / Fax +81- (0)584-27-7505
E- ail: inoura@ inoura.jp
http:// www. inoura.jp
MINOURA NORTH AMERICAN CENTERMINOURA NORTH AMERICAN CENTER
MINOURA NORTH AMERICAN CENTERMINOURA NORTH AMERICAN CENTER
MINOURA NORTH AMERICAN CENTER
FOR RE EARCH, DEVELOPMENT & MARKETINGFOR RE EARCH, DEVELOPMENT & MARKETING
FOR RE EARCH, DEVELOPMENT & MARKETINGFOR RE EARCH, DEVELOPMENT & MARKETING
FOR RE EARCH, DEVELOPMENT & MARKETING
1996 East Avenue, Hayward, CA 94541-5454 U.S.A.
Phone [phone] / Fax [phone]
E- ail : [e-mail]
Made & Quality Controlled in Japan
Copyright © 2002 Minoura Japan, All Rights Reserved.
FOR MORE INFORMATION